Introduction
Thank you for choosing the VGR Professional Hair Clippers and Trimmers Set. This manual provides essential information for the safe and effective use, maintenance, and care of your new grooming tools. Please read these instructions thoroughly before first use and keep them for future reference.
Safety Information
To reduce the risk of injury, electric shock, fire, or damage to the product, always observe the following basic safety precautions:
- Keep away from water: Do not use this appliance near bathtubs, showers, basins, or other vessels containing water.
- Do not use while sleeping or unconscious: Ensure you are fully alert and aware during operation.
- Keep out of reach of children: This appliance is not a toy and should not be handled by children.
- Be cautious when handling sharp blades: Blades are sharp; handle with care to prevent cuts.
- Only use the provided charging cable and accessories.
- Do not disassemble or attempt to repair the appliance yourself. Contact customer support for service.
Package Contents
Your VGR Professional Hair Clippers and Trimmers Set includes the following items:
- 1 x Hair Clipper (VGR-600)
- 1 x Hair Trimmer (VGR-900)
- 2 x Blade Guards
- 6 x Clipper Guide Combs (various sizes)
- 4 x Trimmer Guide Combs (various sizes)
- 1 x Styling Comb
- 1 x Cleaning Brush
- 1 x Type-C Charging Cable
- 1 x Lubricating Oil
- 1 x Barber Cape

All components included in the VGR Professional Hair Clippers and Trimmers Set.
Product Features

Key features of the VGR Hair Clippers and Trimmers.
- Powerful Motor & Sharp Blades: Both the clipper and trimmer feature a 7000 RPM DC motor and ceramic and stainless steel blades for efficient and smooth cutting.
- LED Display: A clear LED display shows real-time battery status, charging notice, and an oil reminder.
- USB-C Charging: Convenient Type-C fast charging for quick power-ups.
- Long Battery Life: Clipper: 2000mAh battery, up to 200 minutes runtime after 3 hours charge. Trimmer: 700mAh battery, up to 120 minutes runtime after 2 hours charge.
- Transparent Design: Modern transparent grip area allows visibility of internal mechanics.

Powerful motor and sharp blades ensure smooth cutting performance.

Smart LED Battery Indicator for monitoring device status.
Setup
1. Initial Charging
Before first use, fully charge both the hair clipper and trimmer. Connect the Type-C charging cable to the device and a suitable USB power adapter (not included). The LED display will indicate charging status.
- Clipper: Approximately 3 hours for a full charge, providing up to 200 minutes of runtime.
- Trimmer: Approximately 2 hours for a full charge, providing up to 120 minutes of runtime.

Charging and operating times for the VGR clipper and trimmer.
2. Attaching Guide Combs
Select the desired guide comb for your preferred hair length. Align the comb with the blade and push it firmly until it clicks into place. Ensure it is securely attached before use.

Available guide comb lengths for precise cutting.
3. Blade Adjustment (Clipper Only)
The hair clipper features an adjustable taper lever on the side, allowing you to fine-tune the cutting length without changing guide combs. Move the lever up for a shorter cut and down for a longer cut (typically 0.8mm to 2.0mm).
Operating Instructions
1. Turning On/Off
Press the power button located on the device to turn it on. Press it again to turn it off.
2. Using the Hair Clipper
- Ensure hair is clean and dry.
- Attach the desired guide comb.
- Start cutting from the bottom of the head, moving upwards against the direction of hair growth.
- Use smooth, overlapping strokes for an even cut.
- Adjust the taper lever for blending and fading.
3. Using the Hair Trimmer
- The trimmer is ideal for detailing, edging, and beard trimming.
- Use without a guide comb for a close trim or with a small guide comb for specific lengths.
- Hold the trimmer at a slight angle and use light pressure for precise lines.

Demonstration of using the hair clipper for a haircut.
Maintenance
1. Cleaning the Blades
After each use, turn off the device and remove the guide comb. Use the provided cleaning brush to remove any loose hairs from the blades and the inside of the device. For a more thorough clean, the blades can be carefully detached and rinsed under running water, ensuring the main body of the clipper/trimmer does not get wet. Dry blades completely before reattaching.
2. Lubricating the Blades
Regular lubrication is crucial for maintaining blade performance and longevity. After cleaning and drying the blades, apply 1-2 drops of the included lubricating oil to the teeth of the blades. Turn on the device for a few seconds to distribute the oil evenly. Wipe off any excess oil.
3. Storage
Store the clippers and all accessories in a dry, cool place, away from direct sunlight and moisture. Keep the blade guards on the blades when not in use to protect them.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Device does not turn on. | Low battery or not charged. | Charge the device fully. |
| Poor cutting performance / pulling hair. | Blades are dull, dirty, or not lubricated. | Clean and lubricate the blades. If problem persists, blades may need replacement. |
| Device makes unusual noise. | Blades are not properly aligned or lubricated. | Ensure blades are clean and lubricated. Check for proper blade alignment. |
| LED display not working. | Device is off or battery is completely drained. | Turn on the device or charge it. |
Specifications
| Feature | Detail |
|---|---|
| Model Number | VGR-600&900 |
| Brand | VGR |
| Motor Speed | 7000 RPM |
| Clipper Battery | 2000mAh Lithium-Ion |
| Clipper Charging Time | 3 Hours |
| Clipper Operating Time | Up to 200 Minutes |
| Trimmer Battery | 700mAh Lithium-Ion |
| Trimmer Charging Time | 2 Hours |
| Trimmer Operating Time | Up to 120 Minutes |
| Blade Material | Ceramic and Stainless Steel |
| Charging Interface | USB Type-C |
| Package Dimensions | 9.37 x 6.26 x 3.23 inches |
| Item Weight | 10.12 ounces |
Warranty and Support
VGR products are manufactured to the highest quality standards. This product comes with a 1-Year Warranty from the date of purchase, covering manufacturing defects.
For technical support, troubleshooting assistance, or warranty claims, please contact VGR customer service. Our support team is available to assist you.
- Warranty Period: 1 Year
- Customer Support: Available 24 hours.

VGR offers a 1-year warranty and 24-hour customer support.





