CUSHYBITE PBP1104

PBP1104 Fits For RYOBI 18V 4.0 Ah Lithium-Ion HIGH PERFORMANCE EDGE Battery User Manual

Model: PBP1104 | Brand: CUSHYBITE

1. Introduction

This manual provides essential information for the safe and effective use of your CUSHYBITE PBP1104 18V 4.0 Ah Lithium-Ion HIGH PERFORMANCE EDGE Battery. This battery is designed to enhance power, runtime, and efficiency in compatible 18V tools. Please read this manual thoroughly before initial use and retain it for future reference.

2. Safety Instructions

Always observe the following safety precautions to prevent injury or damage to the battery and tools:

  • Do not immerse the battery in water or other liquids.
  • Do not store or use the battery in temperatures exceeding 122°F (50°C) or below 14°F (-10°C).
  • Do not incinerate the battery, even if it is severely damaged or completely dead. It can explode in a fire.
  • Do not short-circuit the battery terminals.
  • Do not open, disassemble, or attempt to repair the battery pack.
  • Use only with chargers specified by the manufacturer for this battery type.
  • Keep the battery away from children.
  • If battery fluid comes into contact with skin or eyes, flush with water immediately and seek medical attention.
  • Dispose of batteries responsibly according to local regulations.

3. Product Overview

The CUSHYBITE PBP1104 battery features advanced technology for superior performance:

  • Tabless Lithium Cell Technology: Provides up to 2X more power and 4X longer runtime compared to standard lithium-ion batteries.
  • COOL-CORE PRO System: Features upgraded heat sinks and laser-welded cell straps to keep the battery 25% cooler, extending battery life by 50%.
  • INTELLICELL Technology: Enhances power efficiency and durability for consistent performance.
  • High-Visibility LED Fuel Gauge: Allows for easy monitoring of remaining battery runtime.
  • Robust Design: Includes overmold protection and anti-vibration technology for increased durability in demanding environments.
CUSHYBITE PBP1104 18V 4.0 Ah Lithium-Ion HIGH PERFORMANCE EDGE Battery
Figure 3.1: Front view of the CUSHYBITE PBP1104 18V 4.0 Ah Lithium-Ion HIGH PERFORMANCE EDGE Battery, highlighting its compact design and branding.
CUSHYBITE PBP1104 battery installed in a power drill
Figure 3.2: The PBP1104 battery integrated into a power drill, demonstrating its compatibility and the "21700 Tabless Cell Technology" for enhanced power and runtime.
Comparison of EDGE battery performance with standard lithium-ion
Figure 3.3: Visual representation of the "EDGE Advantage," illustrating how the PBP1104 battery provides 25% more runtime when used with an 18V ONE+ 5" Random Orbit Sander compared to a standard high-performance lithium battery.

4. Setup

4.1 Initial Charging

  1. Ensure you have a compatible 18V lithium-ion battery charger (sold separately).
  2. Insert the battery pack into the charger, aligning the grooves on the battery with the ribs in the charger.
  3. Plug the charger into a standard electrical outlet.
  4. Allow the battery to charge fully before first use. Refer to your charger's manual for specific charging indicators and times.

4.2 Installing the Battery

  1. Ensure the power tool is turned off and disconnected from any power source if applicable.
  2. Align the battery pack with the battery port on the tool.
  3. Slide the battery into the tool until it clicks securely into place. Do not force the battery.
  4. To remove, press the battery release latches (if present on the tool) and slide the battery out.

5. Operating

5.1 Checking Battery Charge

The PBP1104 battery is equipped with a high-visibility LED fuel gauge. Press the button on the battery pack to illuminate the LEDs, indicating the remaining charge level. Refer to the tool's manual for optimal usage and performance with this battery.

5.2 Optimal Performance

For peak performance, especially in demanding tasks, pair this battery with HP brushless tools. The advanced technology in the PBP1104 battery is designed to maximize the output of such tools.

6. Maintenance

6.1 Cleaning

Keep the battery terminals clean and free of debris. Use a clean, dry cloth to wipe the battery exterior. Do not use solvents or harsh chemicals.

6.2 Storage

  • Store the battery in a cool, dry place, away from direct sunlight and extreme temperatures.
  • For long-term storage, it is recommended to store the battery with a partial charge (around 50%).
  • Avoid storing the battery in a completely discharged state to prevent deep discharge and potential damage.

7. Troubleshooting

ProblemPossible CauseSolution
Battery not chargingCharger not plugged in; faulty charger; battery too hot/cold; faulty battery.Check charger connection; try a different outlet; allow battery to reach room temperature; test with another battery/charger if possible.
Battery not powering toolBattery not fully charged; battery not properly seated; faulty battery; faulty tool.Charge battery fully; ensure battery is clicked into place; test battery in another tool; test tool with another battery.
Reduced runtimeBattery not fully charged; battery nearing end of life; extreme operating conditions.Ensure full charge; consider battery replacement if old; operate within recommended temperature ranges.

8. Specifications

FeatureDetail
Model NumberPBP1104
Voltage18V
Capacity4.0 Ah
Battery TypeLithium-Ion (HIGH PERFORMANCE EDGE)
TechnologyTabless Lithium Cell, COOL-CORE PRO, INTELLICELL
CompatibilityAll 18V tools, optimized for HP brushless tools
ManufacturerCUSHYBITE
UPC670308547653

9. Warranty and Support

For warranty information or technical support regarding your CUSHYBITE PBP1104 battery, please contact CUSHYBITE customer service. Details on warranty coverage and how to obtain support are typically provided with your purchase documentation or can be found on the manufacturer's official website.

Always refer to the official CUSHYBITE resources for the most accurate and up-to-date information.

© 2025 CUSHYBITE. All rights reserved.