EVERCROSS BOT Y10 Pool Cleaner Robot User Manual

1. Introduction

Thank you for choosing the EVERCROSS BOT Y10 Cordless Pool Cleaner Robot. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new pool cleaner. Please read this manual thoroughly before first use and keep it for future reference.

The EVERCROSS BOT Y10 is designed for highly efficient floor cleaning of both above-ground and in-ground pools up to 100㎡ (1100 sq.ft). Its wireless design, powerful dual motors, and intelligent features ensure a clean pool with minimal effort.

2. Safety Instructions

Always follow basic safety precautions when using electrical appliances, especially near water. Failure to do so may result in serious injury or damage to the product.

• Read all instructions carefully before operating the robot.
• Do not operate the robot if the power cord or charger is damaged.
• Ensure the robot is fully submerged in water before starting operation.
• Do not allow children to play with or operate the robot.
• Only use the original charger provided with the robot.
• Keep the charging port dry before charging.
• Remove the robot from the pool before adding chemicals or performing maintenance.
• Store the robot in a cool, dry place when not in use.

3. Package Contents

Verify that all items are present in the package:

• EVERCROSS BOT Y10 Pool Cleaner Robot (1 unit)
• Brushes for machine assembly (pre-installed or separate)
• Charger (1 unit)
• Filter cleaning brush (1 unit)
• Recovery rope (1 unit)
• Instruction Manual (this document)
• Operating Guide (Quick Start Guide)

Image: The retail packaging box for the EVERCROSS BOT Y10 Robotic Pool Cleaner, showing the product name and key features.

4. Product Overview

Familiarize yourself with the main components of your EVERCROSS BOT Y10 pool cleaner.

Image: A front-side view of the EVERCROSS BOT Y10 Pool Cleaner Robot, highlighting its compact design and control button.

Key Features:

• Wireless Design: Cordless operation for unrestricted movement.
• Dual Motor System: 40W power for efficient cleaning.
• Floor Cleaning Mode: Optimized for pool floor debris removal.
• Large Cleaning Area: Suitable for pools up to 100㎡ (1100 sq.ft).
• High-Precision Filter: 180µm filter accuracy to capture fine debris.
• Automatic Parking: Robot docks near the pool edge when battery is low or cleaning is complete.
• IPX8 Waterproof: Designed for underwater operation up to 2.5 meters depth.
• Long Battery Life: 5200mAh lithium battery provides up to 70 minutes of cleaning time.

Image: An infographic displaying key specifications of the EVERCROSS BOT Y10, including Net Weight (3 kg), Charging Time (5-6 hours), Maximum Climbing Angle (15°), Filter Precision (180 µm), Debris Capacity (3L), Cleaning Area (120 m²), and Maximum Working Depth (2.5 meters). It also shows both white and black versions of the robot.

5. Setup

Follow these steps to prepare your EVERCROSS BOT Y10 for its first use.

1. Charge the Robot:
   • Ensure the charging port on the robot is completely dry.
   • Connect the charger to the robot's charging port and plug it into a power outlet.
   • The charging indicator light will show the charging status.
   • Allow 5-6 hours for a full charge. The robot is equipped with a 5200mAh lithium battery.
2. Attach Brushes (if not pre-installed):
   • Locate the brushes provided in the package.
   • Align the brushes with the designated slots on the underside of the robot and snap them into place.
3. Attach Recovery Rope:
   • Securely attach the recovery rope to the designated attachment point on the robot. This rope is used to retrieve the robot from the pool.

6. Operation

Operating your EVERCROSS BOT Y10 is simple and straightforward.

1. Place in Pool:
   • Gently lower the robot into the pool. Ensure it is fully submerged and air bubbles have escaped before starting.
2. Start Cleaning:
   • Press the power button on the top of the robot to start the cleaning cycle. The robot will begin moving across the pool floor.
   • The robot is designed to clean the pool floor efficiently, covering an area up to 100㎡.
3. Automatic Parking:
   • When the battery is low or the cleaning cycle is complete (approximately 70 minutes), the robot will automatically move to the edge of the pool.
   • This intelligent feature makes retrieval easy.
4. Retrieve from Pool:
   • Use the recovery rope to gently pull the robot out of the pool.
   • Allow excess water to drain from the robot before handling.

Image: The EVERCROSS BOT Y10 Pool Cleaner Robot operating underwater, demonstrating its "Smart and Efficient Cleaning" capabilities. An overlay shows battery capacity (2550mAh), cleaning time (100 mins), and power (40W).

Image: A person retrieving the EVERCROSS BOT Y10 Pool Cleaner Robot from the edge of a pool, illustrating the "Low Battery Auto-Docking" feature where the robot parks itself when power is low.

7. Maintenance

Regular maintenance ensures optimal performance and extends the lifespan of your pool cleaner.

1. Clean the Filter:
   • After each cleaning cycle, remove the filter basket from the robot.
   • Empty the collected debris (up to 3L capacity).
   • Use the provided filter cleaning brush and rinse the filter thoroughly with water until clean.
   • Ensure the filter is completely dry before reinserting it into the robot.
2. Clean the Robot Exterior:
   • Wipe down the exterior of the robot with a soft, damp cloth.
   • Remove any debris or residue from the wheels and brushes.
3. Storage:
   • When not in use for extended periods, store the robot in a cool, dry place, away from direct sunlight and extreme temperatures.
   • Ensure the battery is partially charged (around 50%) before long-term storage to preserve battery health.

Image: A person demonstrating how to clean the filter of the EVERCROSS BOT Y10 Pool Cleaner Robot using a hose, emphasizing the ease of maintenance.

8. Troubleshooting

If you encounter issues with your EVERCROSS BOT Y10, refer to the following common problems and solutions:

If the problem persists after trying these solutions, please contact customer support.

9. Specifications

10. Warranty and Support

For warranty information, technical support, or any inquiries regarding your EVERCROSS BOT Y10 Pool Cleaner Robot, please contact our customer service team.

• Official Website: https://evercrossbot.eu/
• Email Support: support@evercrossbot.eu

Please have your model number (Y10) and purchase details ready when contacting support.