Introduction
This manual provides essential instructions for the safe and efficient use of your Paladone Bluey Icon Light, Model 14355. This battery-powered LED night light is designed to provide a soft, warm glow, featuring the beloved character Bluey.
Image: The Paladone Bluey Icon Light in its off state, showcasing the character design.
Setup
1. Unpacking
Carefully remove the Bluey Icon Light from its packaging. Inspect the product for any damage. Retain the packaging for future reference or disposal. The packaging also features a colour-in design for creative activity.
Image: The Paladone Bluey Icon Light in its retail packaging, highlighting the colour-in feature.
2. Battery Installation
- Locate the battery compartment cover on the base of the light.
- Using a small screwdriver (not included), unscrew the cover and remove it.
- Insert 2x AAA batteries (not included) into the compartment, ensuring the correct polarity (+/-) as indicated inside.
- Replace the battery compartment cover and secure it with the screw.
3. Placement
Place the Bluey Icon Light on a stable, flat surface. Ensure it is away from direct sunlight, heat sources, and moisture.
Operating Instructions
Turning On/Off
The Bluey Icon Light features a push-button switch. To turn the light on, press the button located on the base of the unit. To turn it off, press the button again.
Image: The Paladone Bluey Icon Light illuminated, providing a soft, warm glow.
Maintenance
Cleaning
To clean the light, gently wipe the surface with a soft, dry cloth. Do not use abrasive cleaners, solvents, or immerse the unit in water.
Battery Replacement
When the light appears dim or stops working, it is time to replace the batteries. Follow the "Battery Installation" steps in the Setup section to replace the 2x AAA batteries. Always dispose of used batteries responsibly according to local regulations.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | Batteries are incorrectly installed or depleted. | Check battery polarity. Replace with fresh AAA batteries. |
| Light is dim. | Batteries are low. | Replace with fresh AAA batteries. |
| Light flickers. | Loose battery connection or low batteries. | Ensure batteries are securely seated. Replace with fresh AAA batteries. |
Specifications
| Feature | Detail |
|---|---|
| Model Number | 14355 |
| Product Dimensions | 3.54"D x 4.13"W x 5.31"H (approx. 9cm D x 10.5cm W x 13.5cm H) |
| Item Weight | 0.08 Kilograms (approx. 2.82 ounces) |
| Light Source Type | LED |
| Light Color | Warm |
| Power Source | Battery Powered (2x AAA, not included) |
| Battery Life | Approximately 8 Hours |
| Switch Type | Push Button |
| Material | Plastic |
| Indoor/Outdoor Usage | Indoor |
| Manufacturer | Paladone |
Image: Diagram showing the approximate dimensions of the Bluey Icon Light: 11cm (4.3") tall and 7.7cm (3") wide at the base.
Warranty and Support
Warranty Information
Specific warranty details for this product may vary by region and retailer. Please refer to your purchase receipt or contact the retailer where the product was purchased for information regarding warranty coverage.
Customer Support
For further assistance, technical support, or inquiries regarding your Paladone Bluey Icon Light, please contact the manufacturer, Paladone, through their official website or customer service channels. Contact information can typically be found on the product packaging or the manufacturer's website.
