Introduction
This manual provides detailed instructions for the installation, operation, maintenance, and troubleshooting of your Haudio Wireless CarPlay Screen and Android Auto Head Unit, Model 2+64GB. Please read this manual thoroughly before use to ensure proper functionality and safety.
Safety Information
- Ensure all connections are secure before operating the device.
- Do not attempt to disassemble or modify the unit. This may void the warranty and cause damage.
- Avoid operating the device in extreme temperatures or direct sunlight for prolonged periods.
- Always prioritize safe driving. Do not operate the touchscreen or adjust settings in a way that distracts you from the road.
Package Contents
Verify that all items are present in the package:
- Haudio Wireless CarPlay Screen & Android Auto Head Unit (2+64GB)
- Power Cable
- RCA Cables
- Camera Input Cable
- GPS Antenna
- Mounting Brackets
- USB Cables
- Instruction Manual
- Rear Camera (if included with your model)
Setup and Installation
Professional installation is recommended for optimal performance and safety. Ensure the vehicle's battery is disconnected before beginning installation.
1. Wiring Connections
- Power Connection: Connect the yellow wire to the constant 12V power source, the red wire to the accessory (ACC) 12V power source, and the black wire to ground.
- Speaker Connections: Connect the speaker wires according to your vehicle's wiring diagram. Ensure correct polarity.
- GPS Antenna: Mount the GPS antenna in a location with a clear view of the sky, typically on the dashboard or under the windshield.
- Rear Camera (Optional): Connect the rear camera video input to the designated camera input on the head unit. Connect the camera's power to the vehicle's reverse light circuit for automatic activation.
- USB Connections: Connect USB devices as needed for media playback or charging.
2. Mounting the Unit
- Secure the head unit into the vehicle's double DIN opening using the provided mounting brackets.
- Ensure the unit is firmly in place and does not obstruct any vehicle controls.
Operating Instructions
1. Initial Power On
- After installation, reconnect the vehicle's battery.
- Turn on the vehicle's ignition. The head unit should power on automatically. If not, press the power button on the unit.
2. Wireless CarPlay / Android Auto Connection
- On the head unit, navigate to the CarPlay or Android Auto application.
- On your smartphone, enable Bluetooth and Wi-Fi.
- Search for the head unit's Bluetooth name on your phone and pair them.
- Confirm the pairing on both devices. The system will then establish a wireless CarPlay or Android Auto connection.
3. Voice Control
- Activate voice control (Siri for CarPlay, Google Assistant for Android Auto) by pressing the steering wheel voice button (if connected) or by saying "Hey Siri" or "Hey Google".
- Use voice commands for navigation, calls, messages, and music playback.
4. Audio Settings
- Access the 12-band ASP EQ tuner through the settings menu to customize audio output.
- Adjust bass, treble, and other audio presets to optimize sound quality.
5. Backup Camera Functionality
- When the vehicle is shifted into reverse, the display will automatically switch to the backup camera view.
- Guide lines may be displayed to assist with parking.
Maintenance
- Screen Cleaning: Use a soft, lint-free cloth to gently wipe the touchscreen. Do not use abrasive cleaners or solvents.
- Software Updates: Periodically check for software updates to ensure optimal performance and access to new features. Follow instructions provided by Haudio for updating.
- General Care: Keep the unit free from dust and debris. Avoid spilling liquids on the device.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Unit does not power on. | Incorrect wiring; Blown fuse; Vehicle battery disconnected. | Check power connections (yellow, red, black wires). Inspect vehicle fuses. Ensure battery is connected. |
| No sound output. | Speaker wires incorrectly connected; Volume too low; Mute function active. | Verify speaker wiring polarity. Increase volume. Check if the unit is muted. |
| CarPlay/Android Auto not connecting. | Bluetooth/Wi-Fi off on phone; Incorrect pairing; Software glitch. | Ensure phone's Bluetooth/Wi-Fi is on. Re-pair the device. Restart both phone and head unit. |
| Backup camera not displaying. | Camera not powered; Video cable loose; Reverse trigger wire not connected. | Check camera power supply. Secure video cable connection. Ensure reverse trigger wire is correctly connected to the vehicle's reverse light circuit. |
| Touchscreen unresponsive. | Temporary software issue; Screen damage. | Restart the head unit. If the problem persists, contact customer support. |
Specifications
| Feature | Detail |
|---|---|
| Model | 2+64G |
| Operating System | Android 13 |
| Display | 7-inch HD Capacitive Touchscreen (1024x600P) |
| Connectivity | Wireless CarPlay, Wireless Android Auto, Bluetooth 4.1, Wi-Fi, Dual USB |
| Audio Output | 50W×4 High-Power Amplifier, 12-band ASP EQ Tuner, Supports FLAC/WAV/APE |
| Storage | 64GB (Internal) |
| Backup Camera | 1080P AHD, 130° Wide View Angle, Night Vision |
| Dimensions | 1.73 x 7.09 x 4.13 inches |
| Weight | 1.43 pounds |
Warranty and Support
Your Haudio Wireless CarPlay Screen & Android Auto Head Unit comes with a 1-year warranty policy from the date of purchase.
For any questions regarding product use, installation, or troubleshooting that is not covered in this manual, please contact Haudio customer support directly. Our support team is available 24/7 to assist you.
Please retain your proof of purchase for warranty claims.
