Introduction
Thank you for choosing the Kaidi TWS KD-932 Wireless Earbuds. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your new earbuds. Please read it carefully to ensure optimal performance and a long lifespan for your device.
Package Contents
Please verify that all the following items are included in your package:
- Kaidi TWS KD-932 Wireless Earbuds (2 units)
- Protective Charging Case
- Ear Tips (various sizes)
- User Manual
- Type-C Charging Cable
Product Overview
Image: Kaidi TWS KD-932 wireless earbuds placed inside their open charging case. The earbuds are black with the 'KAIDI' logo visible, and the charging case is also black, showing charging indicator lights.
The Kaidi TWS KD-932 earbuds feature an ergonomic in-ear design for a secure and comfortable fit. Each earbud is equipped with touch-sensitive controls for media playback, call management, and voice assistant activation. The compact charging case not only protects the earbuds but also provides additional battery life, ensuring your earbuds are always ready for use.
Setup
1. Initial Charging
- Before first use, place both earbuds into the charging case.
- Connect the Type-C charging cable to the charging port on the case and plug the other end into a USB power adapter (not included).
- Allow the earbuds and case to charge fully. The indicator lights on the case will show the charging status.
2. Pairing with a Device
- Ensure the earbuds are charged.
- Open the charging case. The earbuds will automatically enter pairing mode, indicated by flashing lights (refer to specific light patterns in the included user manual for details).
- On your smartphone or Bluetooth-enabled device, go to Bluetooth settings and turn on Bluetooth.
- Search for available devices and select "KD-932" from the list.
- Once connected, the earbuds will indicate successful pairing (e.g., a voice prompt or steady light).
- For subsequent use, the earbuds will automatically connect to the last paired device when taken out of the case.
Image: A single Kaidi TWS KD-932 earbud inserted into a user's ear, demonstrating proper fit and placement for comfortable use.
Operating Instructions
The Kaidi TWS KD-932 earbuds feature intuitive touch controls. The exact number of taps or long presses may vary; please refer to the detailed instructions in the physical user manual for precise commands.
Power On/Off
- Power On: Open the charging case, or long-press the touch area on both earbuds for a few seconds.
- Power Off: Place the earbuds back into the charging case and close the lid, or long-press the touch area on both earbuds for several seconds until they power off.
Music Playback
- Play/Pause: Tap the touch area on either earbud once.
- Next Track: Double-tap the touch area on the right earbud.
- Previous Track: Double-tap the touch area on the left earbud.
Call Management
- Answer/End Call: Tap the touch area on either earbud once.
- Reject Call: Long-press the touch area on either earbud for 2 seconds.
Voice Assistant (Alexa/Siri/Voice Control)
- Activate Voice Assistant: Triple-tap the touch area on either earbud.
Maintenance
Cleaning
- Regularly clean the earbuds and charging case with a soft, dry, lint-free cloth.
- Remove ear tips and clean them with mild soap and water, then dry thoroughly before reattaching.
- Do not use abrasive cleaners, alcohol, or chemical solvents.
- Ensure charging contacts on both earbuds and case are clean and free of debris.
Storage
- When not in use, always store the earbuds in their charging case to protect them and keep them charged.
- Store the device in a cool, dry place, away from extreme temperatures and direct sunlight.
Troubleshooting
If you encounter issues with your Kaidi TWS KD-932 earbuds, try the following solutions:
| Problem | Solution |
|---|---|
| Earbuds not pairing with device. | Ensure earbuds are charged. Turn off and on Bluetooth on your device. Forget "KD-932" from your device's Bluetooth list and re-pair. Try resetting the earbuds (refer to the physical manual for reset procedure). |
| No sound from one or both earbuds. | Check device volume. Ensure earbuds are properly paired. Clean charging contacts. Try resetting the earbuds. |
| Charging case not charging. | Ensure the Type-C cable is securely connected to both the case and the power source. Try a different charging cable or power adapter. |
| Earbuds not charging in case. | Ensure earbuds are correctly seated in the case. Clean the charging contacts on both the earbuds and inside the case. Ensure the charging case itself has power. |
Specifications
| Feature | Detail |
|---|---|
| Model Name | TWS KD-932 |
| Manufacturer | KAIDI |
| Connectivity Technology | Wireless Bluetooth |
| Ear Placement | In-ear |
| Control Type | Touch (Media, Call, Voice Assistant - Alexa/Siri) |
| Noise Control | None |
| Frequency Response | 20 Hz - 20,000 Hz |
| Sensitivity | 92 dB |
| Impedance | 320 Ohms |
| Standby Time | 300 hours |
| Talk Time | 6 hours |
| Music Playback Time | 5 hours |
| Power Source | Type-C Cable Charging |
| Batteries | Integrated (Non-removable) |
| Material | Polycarbonate (PC), Silicone |
| Specific Use | Physical Activities (e.g., Running) |
| Available Colors | Black / White |
| Certification | ANATEL - 12535-21-11512 |
Note: The impedance of 320 Ohms is unusually high for typical earbuds. This specification is provided as listed.
Warranty and Support
Warranty Information
The Kaidi TWS KD-932 Wireless Earbuds come with a 30-day manufacturer's warranty from the date of purchase. This warranty covers manufacturing defects. Please retain your proof of purchase for any warranty claims.
Customer Support
For further assistance, technical support, or warranty inquiries, please contact the retailer where you purchased the product. You may also refer to the official Kaidi website for additional resources or contact information, if available.
