Introduction
The Philips Norelco Shaver i9000 is an advanced electric shaver designed for both wet and dry shaving, offering a close and comfortable experience. It incorporates SenseIQ Technology for intelligent skin comfort and features a Triple Action Lift & Cut system with 360-degree rotating Dual SteelPrecision Blades for efficient hair removal.
Image: The Philips Norelco Shaver i9000, showcasing its sleek design, charging stand, travel case, and nose trimmer accessory, alongside its retail packaging.
What's in the Box
The Philips Norelco Shaver i9000 package includes the following components:
- 1x Shaver i9000
- 1x Nose Trimmer
- 1x Charging Stand
- 1x Travel Case
- 1x Cleaning Brush
- 1x USB-A Cable (Power adapter not included)
Image: A clear display of all items included in the product box: the shaver, nose trimmer, charging stand, travel case, and USB-A charging cable. Note: Power adapter is not included.
Safety Information
Please read and understand all safety instructions before using the Philips Norelco Shaver i9000 to prevent injury or damage.
- Always keep the charging port dry and do not charge the shaver while it is wet.
- Be cautious when using the shaver near water.
- Keep fingers away from the blades during use and cleaning to prevent cuts.
- Always unplug the charger before cleaning the shaver.
- Allow the shaver to dry completely after each use to prevent bacterial growth.
- Always follow the cleaning and maintenance instructions provided by the manufacturer to ensure the safe and optimal operation of the shaver.
Setup
Initial Charge
Before first use, fully charge your Philips Norelco Shaver i9000. The shaver can be fully charged within 1 hour using the elegant charging stand. A 5-minute quick charge provides enough power for one full shave.
- Place the shaver onto the charging stand.
- Connect the USB-A cable to the charging stand and a compatible USB power source (power adapter not included).
- The battery indicator on the shaver will show charging progress.
- Once fully charged, the shaver is ready for use.
Operating Instructions
Shaving Techniques
The Philips Norelco Shaver i9000 can be used for both dry and wet shaving, including in the shower. For optimal results, always use a rotating motion on your skin.
- Dry Shaving: Ensure your face is clean and dry before shaving. Move the shaver in small circular motions across your face and neck.
- Wet Shaving: Apply shaving foam or gel to your skin. Move the shaver in small circular motions. Rinse the shaver head under warm water during and after use.
Image: The shaver in use, highlighting its ability to reach difficult areas like under the nose due to its 360-degree precision flexing heads.
SenseIQ Technology and Pressure Guidance
The SenseIQ technology, powered by AI, provides intelligent skin comfort. The light ring at the top of your shaver assists you in improving your shaving performance by providing pressure feedback:
- Blue Light: Indicates too little pressure. Apply slightly more pressure.
- Green Light: Indicates perfect pressure. Maintain this pressure for optimal closeness and comfort.
- Orange Light: Indicates too much pressure. Reduce pressure to avoid skin irritation.
Image: Visual representation of SenseIQ technology, including the Power Adapt Sensor that reads beard density and the Hydro SkinGlide Coating for smoother gliding.
Using the Nose Trimmer
Attach the nose trimmer accessory to the shaver body. Gently insert the trimmer into your nostril or ear and move it in a circular motion to trim unwanted hair. Ensure the trimmer is clean before and after each use.
Maintenance
Cleaning the Shaver
Regular cleaning ensures optimal performance and hygiene of your shaver. The shaver head is designed for easy cleaning.
- After each shave, switch off the shaver.
- Open the shaver head by pressing the release button.
- Rinse the shaver head thoroughly under warm running water.
- Use the provided cleaning brush to remove any remaining hair particles from the blades and inside the shaver head.
- Close the shaver head and allow it to air dry completely before storing or recharging.
Blade Replacement
The Dual SteelPrecision blades are self-sharpening and designed to last up to 2 years. Replace the shaving heads when you notice a decrease in shaving performance. Refer to the full manual for detailed instructions on replacing the cleaning cartridge and shaving heads.
Troubleshooting
If you encounter any issues with your Philips Norelco Shaver i9000, please consider the following general advice:
- Shaver not turning on: Ensure the shaver is charged. Check the battery indicator. If it's locked, unlock it by pressing and holding the power button for 3 seconds.
- Poor shaving performance: Ensure the shaver heads are clean. The blades may need replacement if they are older than 2 years. Ensure you are applying the correct pressure as indicated by the light ring (aim for green).
- Skin irritation: Ensure you are using the correct shaving technique (circular motions) and applying perfect pressure (green light). Consider using the shaver wet with foam or gel for increased comfort.
For more detailed troubleshooting, please refer to the complete user manual or contact Norelco customer support.
Specifications
| Feature | Detail |
|---|---|
| Model Name | X9000/90 |
| Power Source | Battery Powered |
| Special Feature | Waterproof |
| Recommended Uses | Beard, Face, Mustache, Sideburns |
| Batteries | 1 Lithium Ion battery required (included) |
| Wattage | 3 Watt-hours |
| Manufacturer | Philips Norelco |
Warranty & Support
The Philips Norelco Shaver i9000 comes with a standard 2-year warranty. Upon product registration within 90 days on Philips.com, the warranty can be extended to a total of 5 years.
For further assistance, product registration, or to inquire about replacement parts, please visit the official Norelco website or contact their customer support.
Visit the Norelco Store for more information and products.