UIXE 1SEAT Yellow Corduroy Accent Chair Instruction Manual

Important Safety Information

Please read and understand all instructions before assembling and using this product. Failure to follow these instructions may result in injury or damage to the product.

• Always assemble the product strictly according to the provided instructions. Modifications or alterations can endanger the safety of the product.
• Do not exceed the maximum weight capacity of 400 lbs (181 kg). Overloading may cause the chair to become unstable or break.
• Children should only use this product under direct adult supervision.
• Manual measurements may have an error of 1-2 cm. Please consider this when assessing dimensions.
• Product colors may vary slightly due to different screen displays. Refer to the physical product for the exact color.
• Ensure all connections are secure before use. Periodically check and tighten all fasteners.

Package Contents

Verify that all components listed below are present before beginning assembly. If any parts are missing or damaged, please contact customer support.

• Seat Frame x 1
• Back Frame x 1
• Armrest Left x 1
• Armrest Right x 1
• Metal Rail Bar x 3
• Seat Cushion x 1
• Back Cushion x 1
• Round Throw Pillow x 2
• Front Leg x 2
• Rear Leg x 2
• Assembly Hardware (screws, washers, Allen wrench)

Setup and Assembly Instructions

Assembly is required for this accent chair. Please follow these steps carefully. An Allen wrench and necessary hardware are included in the package.

1. Attach Legs: Carefully unbox all components. Attach the four wooden legs (2 front, 2 rear) to the underside of the seat frame. Ensure they are securely tightened.
2. Assemble Frame: Connect the back frame to the seat frame using the provided metal rail bars and screws. Ensure the connections are firm.
3. Install Armrests: Attach the left and right armrests to the assembled seat and back frames. Align the pre-drilled holes and secure with screws.
4. Place Cushions: Position the seat cushion onto the seat frame and the back cushion against the back frame.
5. Add Throw Pillows: Place the two round throw pillows as desired for additional comfort and style.
6. Final Check: Before use, gently shake the chair to ensure all parts are stable and all screws are tightened.

Figure 1: Detail of the wooden leg attachment point.

Operating Instructions (Usage)

The UIXE Accent Chair is designed for comfortable indoor seating. It is suitable for living rooms, bedrooms, offices, and other indoor spaces.

• Use the chair for sitting, relaxing, reading, or as an accent piece.
• The seat and back cushions are designed for ergonomic support and comfort.
• The two bolster pillows can be positioned for lumbar support or arm comfort.
• Avoid standing on the chair or using it as a step stool.
• Do not expose the chair to excessive moisture or direct sunlight for prolonged periods, as this may damage the fabric and wood.

Figure 2: Fully assembled UIXE 1SEAT Yellow Corduroy Accent Chair.

Maintenance

Proper care will extend the life and appearance of your accent chair.

• Fabric Care: The corduroy fabric is soft and skin-friendly. For general cleaning, gently vacuum with an upholstery attachment to remove dust and debris.
• Spot Cleaning: For spills, blot immediately with a clean, dry cloth. Do not rub, as this can spread the stain. For stubborn stains, use a mild fabric cleaner specifically designed for upholstery, testing on an inconspicuous area first.
• Cushions: The seat and back cushions are removable for easier cleaning and maintenance.
• Wood Care: Wipe wooden legs with a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners.
• Structural Integrity: Periodically check all screws and connections to ensure they remain tight. Re-tighten as necessary to maintain stability.

Troubleshooting

If you encounter any issues with your UIXE Accent Chair, please refer to the following common solutions:

• Chair feels wobbly: Ensure all assembly screws are fully tightened. Check that the legs are evenly seated on the floor.
• Cushions appear flattened: The high-density foam and pocket coils are designed to regain shape. Fluff and rotate cushions regularly to maintain their loft and even wear.
• Noise during use: Check all connections for tightness. Loose fasteners can cause creaking. Apply a small amount of silicone lubricant to metal-on-metal contact points if necessary.

Specifications

Detailed dimensions and materials for the UIXE 1SEAT Yellow Corduroy Accent Chair.

Figure 3: Product dimensions diagram.

Warranty and Support

UIXE is committed to providing quality products and customer satisfaction.

• For any questions, concerns, or assistance with assembly or product issues, please contact our professional customer service team.
• We guarantee a response within 24 hours to address your inquiries.
• Please retain your purchase receipt for any warranty claims.