Introduction
Thank you for purchasing the MEIKEE 200W LED Floodlight. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your new floodlight. Please read this manual thoroughly before use and retain it for future reference.
Product Features
- High Brightness & Energy Efficiency: Equipped with high-efficiency SMD chips, delivering 20000 lumens at 200W with a warm white 2700K color temperature.
- Ultra-Thin Design: Features an ultra-thin profile of approximately 3cm for sleek installation.
- Wide Beam Angle: Provides a 120-degree beam angle for broad and uniform illumination.
- Durable Construction: Made with aluminum alloy and high-strength glass for rust resistance, explosion-proof, and impact resistance, suitable for harsh environments.
- IP66 Waterproof & Dustproof: Designed for all-weather outdoor use, resistant to dust and heavy rain. Note: Do not immerse in water.
- Adjustable Bracket: The mounting bracket can rotate 180 degrees, allowing flexible angle adjustment for various installation needs.
- Versatile Applications: Ideal for billboard lighting, parking lots, garages, warehouses, gardens, and general indoor/outdoor work lighting.
- PSE Certified: Ensures safety and quality standards are met.
Safety Information
- Always disconnect power before installation or maintenance.
- Ensure the input voltage (AC 100-110V 50~60Hz) matches your power supply.
- Installation should be performed by a qualified electrician if you are unsure.
- Do not look directly into the light source when it is on, as it can cause eye strain.
- Do not immerse the floodlight in water, despite its IP66 rating.
- Ensure proper grounding for safety. The foldable plug supports both 2-pin and 3-pin outlets.
- Keep away from flammable materials.
Package Contents
Please check that all items are present and undamaged:
- MEIKEE 200W LED Floodlight (2 units)
- Mounting Screws/Anchors (quantity as supplied)
- Instruction Manual (this document)
Setup and Installation
- Choose Location: Select a suitable mounting location. The bracket allows for wall, ceiling, or ground installation. Consider the 120-degree beam angle and desired illumination area (optimal height 5-8m for 70-100m² coverage).
- Mark Drilling Points: Use the floodlight's bracket as a template to mark the drilling points on the mounting surface.
- Drill Holes: Drill holes at the marked points. Insert wall anchors if necessary.
- Mount Bracket: Secure the bracket to the surface using the provided screws. Ensure it is firmly attached.
- Adjust Angle: Loosen the hexagonal screws on the side of the bracket, adjust the floodlight to the desired angle (up to 180 degrees rotation), and then tighten the screws securely to fix the angle.
- Connect Power: Connect the power cable to a compatible AC 100-110V 50~60Hz power outlet. The foldable plug can be configured for 2-pin or 3-pin outlets. Ensure the connection is secure and waterproof if exposed to the elements.
Note: For outdoor installations, ensure all electrical connections are properly sealed and protected from moisture.
Operating Instructions
Once installed and connected to power, the floodlight will illuminate. There is no ON/OFF switch on the unit itself. Operation is controlled by connecting or disconnecting the power supply.
- Power On: Plug the power cable into a live electrical outlet.
- Power Off: Unplug the power cable from the electrical outlet.
- Angle Adjustment: If you need to change the illumination angle after installation, carefully loosen the hexagonal screws on the bracket, adjust the light, and re-tighten the screws firmly.
Maintenance
- Cleaning: Ensure the floodlight is off and cool before cleaning. Wipe the glass panel and housing with a soft, damp cloth. Do not use abrasive cleaners or solvents.
- Inspection: Periodically check the power cable for any signs of damage or wear. Ensure all mounting screws remain tight.
- Heat Dissipation: Ensure the heat dissipation fins on the back of the unit are not obstructed to maintain optimal performance and lifespan.
- No User-Serviceable Parts: Do not attempt to open or repair the floodlight yourself. This will void the warranty and may pose a safety risk.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | No power supply; loose connection; faulty outlet. | Check power connection. Ensure outlet is working. Test with another device. |
| Light flickers. | Unstable power supply; loose wiring. | Check power source stability. Ensure all connections are tight. |
| Reduced brightness. | Dirt or debris on glass panel; aging LED chips. | Clean the glass panel. If problem persists, contact support. |
| Water inside the unit. | Improper installation; extreme weather conditions; unit defect. | Immediately disconnect power. Contact customer support. Do not attempt to use. |
If troubleshooting steps do not resolve the issue, please contact MEIKEE customer support.
Specifications
| Brand | MEIKEE |
| Model Number | FLA200 |
| Power Consumption | 200W |
| Luminous Flux | 20000 LM |
| Color Temperature | 2700K (Warm White) |
| CRI (Color Rendering Index) | ≥90 |
| Beam Angle | 120° |
| Input Voltage | AC 100-110V 50~60Hz |
| Cable Length | 1.5 meters |
| Waterproof Rating | IP66 |
| Material | Aluminum Alloy, High-Strength Glass |
| Product Dimensions | 37 x 7.5 x 24 cm |
| Weight | 3.26 kg |
Warranty and Support
This MEIKEE LED Floodlight comes with a 2-year warranty from the date of purchase.
If you encounter any issues or have questions regarding your product, please contact our customer support team. To expedite service, please provide your order number and a detailed description of the issue.
Contact Method:
- Go to your Amazon Account Service.
- Navigate to "Order History".
- Find your order from "MEIKEE-JP".
- Click on "Ask a Question".
