1. Introduction
Welcome to your BRESSER ClimaTemp IO Weather Station. This manual provides detailed instructions for the setup, operation, and maintenance of your device. This set includes two main reception stations and three wireless outdoor sensors, enabling you to monitor temperature and humidity in up to five different locations simultaneously.
2. Safety Information
- Battery Safety: Always insert batteries with correct polarity (+/-). Do not mix old and new batteries, or different types of batteries. Remove exhausted batteries promptly. Do not dispose of batteries in fire.
- Environmental Conditions: Avoid exposing the devices to extreme temperatures, direct sunlight, or high humidity.
- Handling: Do not disassemble or attempt to repair the devices yourself. Refer all servicing to qualified personnel.
- Choking Hazard: Keep small parts and batteries out of reach of children.
3. Package Contents
Please check to ensure all components are present:
- 2 x BRESSER ClimaTemp IO Main Reception Stations (one black, one white)
- 3 x BRESSER ClimaTemp IO Wireless Outdoor Sensors
- 1 x User Manual (this document)
This image displays the complete BRESSER ClimaTemp IO Weather Station package, including one black and one white main reception station, along with three compact white wireless outdoor sensors.
4. Product Overview
4.1 Main Reception Station
The main reception station features a large LCD display showing time, date, moon phase, indoor temperature and humidity, and outdoor temperature and humidity. It includes buttons for setting time, date, and viewing minimum/maximum values.
A detailed front view of the black main reception station, highlighting its LCD display and sleek design.
A detailed front view of the white main reception station, showcasing its LCD display and clean aesthetic.
4.2 Wireless Outdoor Sensor
The compact outdoor sensors measure temperature and humidity and transmit data wirelessly to the main stations. They are designed for outdoor use with IP44 water resistance.
This image illustrates the IP44 water resistance of the outdoor sensor, showing it being splashed with water, suitable for outdoor placement.
5. Setup
5.1 Battery Installation
Main Reception Station:
- Locate the battery compartment on the back of the main station.
- Open the battery compartment cover.
- Insert 3 x AAA batteries (not included) according to the polarity markings (+/-).
- Close the battery compartment cover securely.
The back of the black main reception station, revealing the battery compartment and control buttons for setup and adjustments.
The back of the white main reception station, showing the battery compartment and control buttons for setup and adjustments.
Wireless Outdoor Sensor:
- Locate the battery compartment on the back of the outdoor sensor.
- Open the battery compartment cover.
- Insert 2 x AAA batteries (not included) according to the polarity markings (+/-).
- Close the battery compartment cover securely.
5.2 Sensor Pairing
After inserting batteries into both the main station(s) and sensors, the main station(s) will automatically begin searching for sensor signals. This process may take a few minutes. Ensure sensors are within range.
- Place the main station(s) and outdoor sensors close to each other during initial setup.
- The main station display will show a flashing outdoor temperature/humidity area or a signal icon, indicating it is searching for sensors.
- Once a sensor signal is received, the outdoor temperature and humidity will appear on the display.
- If a sensor does not connect, press the 'RESET' button on the sensor and/or the 'CH' button on the main unit to initiate a new search.
5.3 Placement
Optimal placement ensures accurate readings and reliable wireless transmission.
- Main Station: Place the main station indoors, away from direct sunlight, heat sources, or drafts. It can be wall-mounted or placed on a table using its integrated stand.
- Outdoor Sensors: Mount outdoor sensors in a shaded area, protected from direct rain and sunlight, to ensure accurate temperature and humidity readings. The wireless range is up to 50 meters in open areas. Avoid placing sensors near large metal objects or electrical appliances that may interfere with the signal.
6. Operating Instructions
6.1 Display Information
The LCD display provides the following information:
- Time and Date: Current time, date, and day of the week.
- Moon Phase: Graphical representation of the current moon phase.
- Indoor Temperature and Humidity: Readings from the main station's internal sensors.
- Outdoor Temperature and Humidity: Readings from the connected wireless outdoor sensors.
- Min/Max Records: Highest and lowest recorded temperature and humidity values.
The black main reception station is shown in a typical indoor environment, displaying current time, date, indoor temperature and humidity, and outdoor temperature and humidity readings.
6.2 Button Functions
The main station typically has the following buttons:
- MODE/SET: Press to cycle through display modes (e.g., time, alarm) or hold to enter setting mode.
- UP/+: In setting mode, increases values. In normal mode, may switch between °C/°F or view min/max.
- DOWN/-: In setting mode, decreases values.
- CH (Channel): Press to switch between outdoor sensor channels (1, 2, 3) or hold to initiate a new sensor search.
- LIGHT/SNOOZE: Activates the backlight temporarily.
6.3 Min/Max Temperature and Humidity
The station records the minimum and maximum temperature and humidity values for both indoor and outdoor environments.
- Press the UP/+ button repeatedly to cycle through current, maximum (MAX), and minimum (MIN) readings.
- To reset the MAX/MIN records, hold the UP/+ button while MAX or MIN values are displayed.
6.4 Backlight
Press the LIGHT/SNOOZE button to activate the display backlight for a few seconds, improving visibility in low-light conditions.
6.5 Time and Date Setting
To manually set the time and date:
- Hold the MODE/SET button for approximately 3 seconds to enter time setting mode. The hour digit will flash.
- Use the UP/+ or DOWN/- buttons to adjust the hour.
- Press MODE/SET again to confirm and move to the next setting (minutes, year, month, day, 12/24 hour format, temperature unit °C/°F).
- Repeat steps 2 and 3 until all settings are configured.
- Press MODE/SET one last time or wait for 15 seconds for the station to exit setting mode automatically.
7. Maintenance
7.1 Cleaning
Clean the devices with a soft, damp cloth. Do not use abrasive cleaners or solvents, as these may damage the display or casing.
7.2 Battery Replacement
When the battery indicator appears on the display, it is time to replace the batteries. Follow the battery installation steps in Section 5.1. It is recommended to replace all batteries in a unit at the same time.
8. Troubleshooting
- No outdoor temperature/humidity display: Ensure batteries are correctly installed in the sensor and main station. Press the 'RESET' button on the sensor and/or the 'CH' button on the main unit to re-establish connection. Ensure the sensor is within the 50m wireless range and not obstructed by large metal objects.
- Incorrect readings: Ensure sensors are placed away from direct sunlight, heat sources, or extreme humidity. Allow up to 30 minutes for readings to stabilize after initial setup or battery replacement.
- Display blank or dim: Replace batteries in the main station. Check battery polarity.
- Time/Date incorrect: Manually set the time and date as described in Section 6.5.
9. Specifications
| Model Number | 7000013 |
| Product Dimensions (Main Unit) | 80 x 21.5 x 110 mm (3.15 x 0.87 x 4.33 inches) |
| Item Weight | 360 Grams (12.7 ounces) |
| Power (Main Unit) | 3 x AAA batteries (not included) |
| Power (Outdoor Sensor) | 2 x AAA batteries (not included) |
| Wireless Range | Up to 50 meters (open area) |
| Mounting Type | Wall mounting and table mounting |
| Outdoor Sensor Protection | IP44 (Water Resistance and Splash-Proof) |
10. Warranty and Support
BRESSER products are designed for quality and reliability. For information regarding warranty terms and conditions, please refer to the warranty card included with your purchase or visit the official BRESSER website.
For technical support, troubleshooting assistance, or spare parts, please contact BRESSER customer service. Contact details can typically be found on the BRESSER website or on your product packaging.
Online Resources: For additional information, FAQs, and product registration, please visit the official BRESSER website.
