1. Introduction
The SKIL Compact Workbench with Folding Stand (Model SBT0011) is a versatile and portable solution designed to support various woodworking and DIY tasks. It features a quick-connect system for easy setup, integrated clamping controls for securing materials, and a fold-flat design for convenient storage. This manual provides essential information for the safe assembly, operation, and maintenance of your workbench.
Figure 1.1: Fully assembled SKIL Compact Workbench with Folding Stand.
2. Safety Information
Always observe basic safety precautions when using this product to reduce the risk of personal injury and damage to the workbench. Read and understand all instructions before use.
- Read All Instructions: Familiarize yourself with the workbench's features and operation.
- Wear Safety Gear: Always wear appropriate personal protective equipment, such as safety glasses, when working with tools on the workbench.
- Stable Surface: Ensure the workbench is placed on a stable, level surface before use.
- Weight Capacity: Do not exceed the maximum weight capacity of the workbench. Refer to the specifications section for details.
- Secure Workpiece: Always properly secure your workpiece using the clamping mechanisms to prevent movement during operation.
- Keep Area Clear: Maintain a clean and well-lit work area. Cluttered areas invite accidents.
- Children and Bystanders: Keep children and bystanders away while operating the workbench.
- Inspect Before Use: Before each use, inspect the workbench for any damaged parts. Do not use if damaged.
3. Package Contents
Verify that all components are present upon unpacking. If any parts are missing or damaged, contact SKIL customer service.
- SKIL Compact Workbench Assembly
- Folding Stand Assembly
- Quick-Install Dust Bag
- Instruction Manual (this document)
4. Setup
Follow these steps to set up your SKIL Compact Workbench.
4.1 Unfolding the Stand
- Place the folded stand on a flat surface.
- Carefully extend the legs until they lock into place, forming a stable 'X' shape.
- Ensure all locking mechanisms are engaged before proceeding.
Figure 4.1: Front view of the workbench stand in an unfolded position.
4.2 Attaching the Workbench Top (Quick-Connect System)
- Align the quick-connect points on the workbench top with the corresponding receivers on the unfolded stand.
- Press down firmly until the workbench top clicks securely into place. This system allows for fast, tool-free attachment.
- Verify that the workbench top is firmly attached and does not wobble.
Figure 4.2: Detail of the quick-connect system for attaching the workbench top to the stand.
4.3 Installing the Dust Bag
- Locate the quick-install dust bag.
- Attach the dust bag to the designated hooks or clips on the stand, typically located beneath the workbench surface.
- Ensure the bag is securely fastened to collect debris effectively.
Figure 4.3: The quick-install dust bag attached to the workbench stand, collecting sawdust from an attached tool.
5. Operating Instructions
5.1 Using Clamping Controls
The workbench features integrated controls for clamping and securing various objects. These controls allow for precise adjustment to hold both small and large workpieces firmly in place.
- Adjusting Jaws: Rotate the handle to open or close the workbench jaws.
- Securing Workpiece: Place your material between the jaws and turn the handle until the workpiece is securely clamped. Do not overtighten.
- Using Bench Dogs: Utilize the included bench dogs in the pre-drilled holes on the workbench surface for irregular shapes or additional clamping points.
Figure 5.1: Demonstrating the easy-to-use clamping controls for securing a workpiece on the workbench.
5.2 Compatibility with Other SKIL Tools
The SKIL Compact Workbench is designed for compatibility with several other SKIL products (sold separately), enhancing its functionality.
- Folding Stand Compatibility: The stand is compatible with SKIL Table Saws (models TS6308, TS6328) and the 5-1/2 In. Flooring Saw (model FS3602).
- Workbench Compatibility: The workbench itself is compatible with the Portable Miter Saw Stand (model SRS0001) and the Rolling Tool Box 3 Pc. Tower Set (model TSM0002-3).
Figure 5.2: The workbench stand supporting a SKIL table saw, illustrating tool compatibility.
6. Maintenance
Regular maintenance ensures the longevity and optimal performance of your SKIL Compact Workbench.
- Cleaning: After each use, wipe down the workbench surfaces with a damp cloth to remove dust and debris. Avoid harsh chemicals.
- Dust Bag: Regularly empty the quick-install dust bag to maintain effective dust collection and prevent clogging.
- Lubrication: Periodically apply a light lubricant to the clamping mechanism's moving parts to ensure smooth operation.
- Storage: When not in use, fold the workbench flat for easy storage in a dry, protected area.
Figure 6.1: The workbench stand in its folded position, ready for compact storage.
7. Troubleshooting
This section addresses common issues you might encounter with your workbench.
- Workbench Wobbles:
- Ensure all stand legs are fully extended and locked.
- Verify the quick-connect system is securely engaged between the top and stand.
- Place the workbench on a level surface.
- Clamping Mechanism Stiff:
- Clean any debris from the screw threads and jaws.
- Apply a light lubricant to the moving parts of the clamping mechanism.
- Dust Bag Not Collecting:
- Check if the dust bag is full and empty it.
- Ensure the dust bag is properly attached and sealed to the collection port.
If you encounter issues not listed here or require further assistance, please contact SKIL customer support.
8. Specifications
| Feature | Detail |
|---|---|
| Model Number | SBT0011 |
| Brand | SKIL |
| Product Dimensions (L x W x H) | 24"L x 6.1"W x 7.5"H (folded) |
| Item Weight | 4.71 Pounds |
| Material | Metal, Plastic |
| Special Features | Quick-Connect System, Foldable, Adaptable, Steel Locker Plate |
| Included Components | Stand |
| UPC | 195532201947 |
Figure 8.1: The steel locker plate, contributing to increased weight capacity and stability.
9. Warranty and Support
For warranty information, product registration, or technical support, please refer to the official SKIL website or contact their customer service department. Keep your purchase receipt as proof of purchase.
SKIL Customer Service: www.skil.com/support
Online Resources: For additional tips, FAQs, and product videos, visit the official SKIL website.
