XMHEIRD AC Adapter Charger User Manual

1. Introduction

This manual provides essential instructions for the safe and effective use of your XMHEIRD AC Adapter Charger. This power supply is designed to provide reliable power to compatible TYMO hair straightener brushes, specifically models HC122P, HC122, HC120, and HC120P. Please read this manual thoroughly before use and retain it for future reference.

Image: The XMHEIRD AC Adapter Charger, showing the main unit and its attached USB-C type cable.

2. Safety Information

Your safety is paramount. Please observe the following precautions:

• This product is designed with multiple safety mechanisms and complies with international quality certification standards.
• Important: Before connecting, verify that the DC socket type, power consumption, and polarity of your device are compatible with this adapter. Incorrect usage may cause damage to the device or the adapter.
• Do not expose the adapter to water, moisture, or high humidity. Use only in dry indoor conditions.
• Do not disassemble, modify, or attempt to repair the adapter. Refer all servicing to qualified personnel.
• Keep the adapter away from heat sources, direct sunlight, and flammable materials.
• Ensure the adapter is plugged into a properly grounded electrical outlet.
• Unplug the adapter from the power outlet when not in use for extended periods or during electrical storms.

3. Package Contents

The package contains the following item:

• 1 x XMHEIRD AC Adapter Charger

4. Setup

Follow these steps to set up your AC adapter charger:

1. Inspect the Adapter: Before use, visually inspect the adapter and cable for any signs of damage. Do not use if damaged.
2. Verify Compatibility: Confirm that your TYMO hair straightener brush (models HC122P, HC122, HC120, HC120P) requires a 5V power input and uses a USB-C type connector.
3. Connect to Device: Insert the USB-C type connector of the adapter cable firmly into the charging port of your TYMO hair straightener brush.
4. Connect to Power Outlet: Plug the AC adapter into a standard 100-240VAC 50/60Hz wall outlet.

Image: A close-up view of the USB-C type connector, which connects to the hair straightener brush.

5. Operating Instructions

Once connected, the adapter will begin to supply power to your TYMO hair straightener brush. The charging indicator on your hair straightener brush (if available) will typically illuminate to show that it is receiving power.

• Use the adapter only for its intended purpose: powering and charging compatible TYMO hair straightener brushes.
• Do not overload the adapter by connecting incompatible devices or devices with higher power requirements than specified.
• Always unplug the adapter from the wall outlet by grasping the plug, not the cord.

6. Maintenance

Proper maintenance ensures the longevity of your adapter:

• Cleaning: Disconnect the adapter from the power outlet and the device before cleaning. Use a soft, dry cloth to wipe the surface. Do not use liquid cleaners or abrasive materials.
• Storage: When not in use, store the adapter in a cool, dry place, away from direct sunlight and extreme temperatures. Avoid tightly winding the cable to prevent damage.
• Inspection: Periodically check the cable and plug for any signs of wear, cuts, or damage. If damage is found, discontinue use and replace the adapter.

7. Troubleshooting

If you encounter issues with your adapter, refer to the following common solutions:

• Device not charging/powering on:
  • Ensure the adapter is securely plugged into a working wall outlet. Test the outlet with another device.
  • Verify that the USB-C connector is fully inserted into your hair straightener brush.
  • Confirm that your hair straightener brush is one of the compatible models (HC122P, HC122, HC120, HC120P).
  • Check the adapter cable for any visible damage. If damaged, replace the adapter.
• Adapter feels warm during use:
  • It is normal for power adapters to become slightly warm during operation. If the adapter becomes excessively hot, unplug it immediately and discontinue use. Ensure adequate ventilation around the adapter.

8. Specifications

Image: The top surface of the adapter, clearly displaying the input (100-240VAC, 0.3A, 50/60Hz) and output (5V ⎯ 2000mA) specifications.

9. Warranty Information

Specific warranty details for this product are not provided in this manual. For information regarding warranty coverage, please refer to the product packaging or contact the seller directly.

10. Customer Support

Should you have any questions, concerns, or require assistance with your XMHEIRD AC Adapter Charger, please do not hesitate to contact our customer support team. We are committed to providing friendly and helpful support.

You may also visit the XMHEIRD Store on Amazon for more information or to contact the seller directly.