Tailulu MJ35 Cordless Vacuum Cleaner User Manual

1. Important Safety Instructions

Please read all instructions carefully before using this appliance. Failure to follow these instructions may result in electric shock, fire, or serious injury.

• Do not use outdoors or on wet surfaces.
• Do not allow to be used as a toy. Close attention is necessary when used by or near children.
• Use only as described in this manual. Use only manufacturer's recommended attachments.
• Do not use with damaged cord or plug. If appliance is not working as it should, has been dropped, damaged, left outdoors, or dropped into water, return it to a service center.
• Do not pull or carry by cord, use cord as a handle, close a door on cord, or pull cord around sharp edges or corners. Keep cord away from heated surfaces.
• Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.
• Do not handle plug or appliance with wet hands.
• Do not put any object into openings. Do not use with any opening blocked; keep free of dust, lint, hair, and anything that may reduce airflow.
• Keep hair, loose clothing, fingers, and all parts of body away from openings and moving parts.
• Do not pick up anything that is burning or smoking, such as cigarettes, matches, or hot ashes.
• Do not use to pick up flammable or combustible liquids, such as gasoline, or use in areas where they may be present.
• Do not pick up toxic material, such as chlorine bleach, ammonia, or drain cleaner.
• Do not use without dust bag and/or filters in place.
• Turn off all controls before unplugging.
• Use extra care when cleaning on stairs.
• Store the appliance indoors.
• Recharge only with the charger specified by the manufacturer.

2. Product Overview

The Tailulu MJ35 Cordless Vacuum Cleaner is designed for efficient and versatile cleaning. It features a powerful motor, intelligent controls, and a modular design for various cleaning tasks.

Key Features:

• Powerful Suction: Up to 90,000Pa with a 550W brushless motor for thorough cleaning.
• Lightweight Design: Main body weighs approximately 1.2kg for easy maneuverability.
• Intelligent LCD Display: Provides real-time information on battery level, charging status, filter blockage, brush head blockage, and overheating protection.
• Automatic Dust Detection & AUTO Mode: Sensors detect dust particle size and floor type, automatically adjusting suction power for optimal cleaning with minimal energy loss.
• Multiple Suction Modes: Eco, Standard, Strong, and AUTO modes for different cleaning needs.
• Long Runtime: Up to 60 minutes of continuous operation on a single charge.
• 7-Layer Cyclone Filtration System: Captures 99.97% of fine dust particles (0.3μm) and prevents secondary air pollution with a high-performance HEPA filter.
• Large Capacity Dust Cup: 1.5L dust cup reduces the frequency of emptying. One-touch emptying design keeps hands clean.
• 2-Way Design: Easily converts between stick vacuum and handheld vacuum for versatile cleaning.
• Tangle-Free V-shaped Brush Head: Prevents hair from tangling, making maintenance easier.
• LED Lights on Brush Head: Illuminates dark areas, making hidden dust visible.
• Detachable Battery: Allows for flexible charging options and extended runtime with an optional spare battery.
• 2-in-1 Charging & Storage Stand: Self-standing design for convenient storage and charging without drilling walls.

Image: The Tailulu MJ35 Cordless Vacuum Cleaner in use, highlighting its 90KPa suction power and 550W brushless motor. A woman is vacuuming a rug while a child and cat are nearby, demonstrating its quiet operation.

Image: Close-up of the V-shaped tangle-free brush head, illustrating the three adjustable suction levels: Eco (35KPa), Standard (50KPa), and Strong (90KPa).

Image: The intelligent LCD touch display showing battery percentage, filter status, overheating warning, and AUTO mode indicator. A finger is shown interacting with the touch screen.

3. Setup

3.1 Assembly

1. Unpack all components and ensure all parts are present.
2. Attach the extension pipe to the main unit until it clicks into place.
3. Connect the brush head to the other end of the extension pipe, ensuring it is securely fastened.
4. For handheld use, attach desired nozzle (crevice tool or 2-in-1 brush) directly to the main unit.

3.2 Initial Charging

Before first use, fully charge the battery. The vacuum cleaner comes with a 2-in-1 charging and storage stand.

1. Place the 2-in-1 charging stand in a convenient location near a power outlet.
2. Mount the vacuum cleaner onto the stand. Ensure the charging contacts align.
3. Connect the power adapter to the charging stand and plug it into a wall outlet.
4. The LCD display will show the charging status. A full charge takes approximately 4 hours.
5. The detachable battery can also be charged independently by removing it from the main unit and placing it in the designated charging slot on the stand.

Image: The Tailulu MJ35 Cordless Vacuum Cleaner docked in its 2-in-1 charging and storage stand, with accessories neatly stored. This stand allows for charging without wall-mounting.

4. Operating Instructions

4.1 Power On/Off

Press the power button once to turn on the vacuum cleaner. It will start in the last used mode or default to Eco mode. Press the power button again to turn it off.

4.2 Adjusting Suction Modes

The vacuum cleaner offers four suction modes:

• Eco Mode (35KPa): For light cleaning and extended runtime (up to 60 minutes).
• Standard Mode (50KPa): For daily cleaning tasks.
• Strong Mode (90KPa): For deep cleaning and stubborn dirt.
• AUTO Mode: The intelligent dust detection sensor automatically adjusts suction power based on the amount of dust and floor type. Activate this mode for optimized cleaning efficiency.

Use the '+' and '-' buttons on the LCD display to cycle through Eco, Standard, and Strong modes. Press the 'A' button to activate or deactivate AUTO mode.

4.3 Using Attachments

The vacuum cleaner comes with various attachments for different cleaning needs:

• Main Brush Head: Ideal for floors, carpets, and large surfaces. Features LED lights for improved visibility.
• Crevice Tool: Perfect for narrow gaps, corners, and hard-to-reach areas like car interiors or sofa crevices.
• 2-in-1 Brush Nozzle: Combines a brush and a wide nozzle for cleaning delicate surfaces, keyboards, curtains, or upholstery.

To change attachments, press the release button on the main unit or extension pipe and swap the desired tool.

Image: The Tailulu MJ35 demonstrating its 2-way functionality (stick and handheld) and the LED lights on the brush head, which illuminate dust in dark areas.

5. Maintenance

Regular maintenance ensures optimal performance and extends the lifespan of your vacuum cleaner.

5.1 Emptying the Dust Cup

1. Ensure the vacuum cleaner is turned off.
2. Hold the main unit over a trash bin.
3. Press the one-touch release button on the dust cup to open the bottom flap and empty the contents.
4. Close the dust cup flap securely until it clicks.

Image: A hand demonstrating the one-touch dust cup emptying mechanism, showing debris falling into a trash bin without direct contact, ensuring clean hands.

5.2 Cleaning Filters

The 7-layer filtration system includes a washable HEPA filter. Clean filters regularly to maintain suction power.

1. Twist and remove the dust cup from the main unit.
2. Remove the HEPA filter and other filter components.
3. Tap off loose dust. Rinse the HEPA filter and other washable components under cold running water until the water runs clear.
4. Allow all filter components to air dry completely for at least 24 hours before reassembling. Do not use a dryer or direct heat.
5. Reassemble the filters and dust cup, ensuring they are securely in place.

Image: An exploded view of the Tailulu MJ35's 7-layer cyclone filtration system, showing the various filter components including the HEPA filter, designed to capture fine particles and prevent secondary pollution.

5.3 Cleaning the Brush Head

The V-shaped tangle-free brush head minimizes hair tangles, but occasional cleaning may be necessary.

1. Ensure the vacuum cleaner is turned off and disconnected from the extension pipe.
2. Locate the release tab on the side of the brush head and open it to remove the brush roller.
3. Remove any tangled hair or debris from the brush roller and the brush head cavity. A pair of scissors may be used carefully to cut tangled hair.
4. Reinsert the brush roller and close the release tab until it clicks.

6. Troubleshooting

If you encounter issues with your Tailulu MJ35, refer to the following common problems and solutions:

7. Specifications

8. Warranty and Support

The Tailulu MJ35 Cordless Vacuum Cleaner comes with a 12-month warranty from the date of purchase. You can extend this warranty by an additional year, totaling 2 years of quality assurance, by contacting customer support.

For product malfunctions, exchanges, or any inquiries, please contact our customer service team through your Amazon account:

1. Go to "Account Service".
2. Select "Order History".
3. Find your order from "Tailulu Direct Store".
4. Click "Ask a Question".

Our dedicated customer support team is available to assist you with any issues or questions you may have.