ETENWOLF S-TR-151D

ETENWOLF 30W USB-C Wall Charger

Model: S-TR-151D

1. Introduction

Thank you for choosing the ETENWOLF 30W USB-C Wall Charger. This compact and powerful charger is designed to provide efficient and safe charging for a wide range of USB-C compatible devices, including smartphones, tablets, and laptops. Please read this manual carefully before use to ensure optimal performance and safety.

2. Safety Information

  • Do not expose the charger to liquids, extreme temperatures, or direct sunlight.
  • Do not disassemble, modify, or attempt to repair the charger.
  • Use only compatible USB-C cables with this charger.
  • Keep out of reach of children.
  • Unplug the charger from the power outlet when not in use or during electrical storms.
  • This charger is not compatible with the J1 car battery jump starter, as the J1 car battery jump starter uses a standard Type-A to Type-C cable.
ETENWOLF 30W USB-C Wall Charger with safety icons for over-heat, over-voltage, over-charge, and short-circuit protection.

Image: The ETENWOLF 30W USB-C Wall Charger features multiple safety protections, including safeguards against over-heating, over-voltage, over-charging, and short-circuits.

3. Package Contents

  • 1 x ETENWOLF 30W USB-C Wall Charger Block

Note: A USB-C charging cable is not included and must be purchased separately.

4. Product Overview

The ETENWOLF 30W USB-C Wall Charger is a compact power adapter designed for fast charging. It features a single USB-C output port and standard AC prongs for wall outlets.

Front view of the ETENWOLF 30W USB-C Wall Charger, showing its compact design and USB-C port.

Image: The ETENWOLF 30W USB-C Wall Charger, highlighting its compact form factor and single USB-C output.

5. Setup and Operation

  1. Connect the Cable: Plug one end of your USB-C charging cable (not included) into the USB-C port on the ETENWOLF 30W Wall Charger.
  2. Connect to Device: Plug the other end of the USB-C charging cable into the charging port of your compatible device (e.g., smartphone, tablet, laptop).
  3. Plug into Outlet: Insert the charger's prongs into a standard AC wall outlet.
  4. Begin Charging: Your device should begin charging automatically. The charger supports fast charging for compatible devices, delivering up to 30W of power.
ETENWOLF 30W USB-C Wall Charger plugged into an outlet, charging an iPhone 16 Pro Max, showing 50% charge in 30 minutes.

Image: The 30W USB-C Wall Charger in use, demonstrating its high-speed charging capability, such as charging an iPhone 16 Pro to 50% in approximately 30 minutes.

Universal Compatibility

This charger is designed for broad compatibility with various USB-C devices, including:

  • ETENWOLF S6/S5/S3/Air3/P300 Series products
  • iPhone 16/16 Plus/16 Pro/16 Pro Max
  • iPhone 15/15 Plus/15 Pro/15 Pro Max
  • 2021/2020/2018 iPad Pro 12.9/11 inch, iPad Air 4
  • MacBook Air 13 inch, MacBook 12 inch
  • Google Pixel 4/4 XL/3a XL/3/XL/2
  • Samsung Galaxy S8/S9/S10/S20 Plus, Note 10
  • And other USB-C compatible phones, tablets, and laptops.
Diagram showing the ETENWOLF 30W USB-C Wall Charger compatible with ETENWOLF products, phones, and tablets, requiring a USB-C cable.

Image: Visual representation of the charger's universal compatibility with various ETENWOLF devices, smartphones, and tablets, all requiring a USB-C cable.

6. Maintenance

  • Clean the charger with a dry, soft cloth. Do not use liquid cleaners.
  • Store the charger in a cool, dry place when not in use.
  • Avoid dropping or subjecting the charger to strong impacts.

7. Troubleshooting

Problem Possible Cause Solution
Device not charging. Loose connection, faulty cable, power outlet issue, incompatible device.
  • Ensure the charger and cable are securely plugged in.
  • Try a different USB-C cable.
  • Test the charger in a different wall outlet.
  • Verify your device is USB-C compatible.
Slow charging speed. Cable quality, device not supporting fast charging, background apps.
  • Use a high-quality USB-C cable designed for fast charging.
  • Ensure your device supports PD3.0 or QC4+ fast charging protocols.
  • Close unnecessary background applications on your device.
Charger feels warm. Normal operation during high-power charging. A slight warmth is normal. If it becomes excessively hot, unplug immediately and contact support.

8. Specifications

Feature Detail
Model Number S-TR-151D
Wattage 30 Watts
Input Voltage 240 Volts (AC)
Amperage 2 Amps
Total USB Ports 1 (USB Type C)
Special Feature Fast Charging (QC4+, PD3.0 compatible)
Item Weight 2.08 ounces
Package Dimensions 2.48 x 1.65 x 1.18 inches

9. Product Video

Video: An official ETENWOLF video demonstrating the features and usage of the 30W USB-C charger block, including its fast charging capabilities and compact design.

10. Warranty and Support

For warranty information and customer support, please refer to the documentation included with your product packaging or visit the official ETENWOLF website. You may also contact the seller directly through your purchase platform for assistance.

© 2026 ETENWOLF. All rights reserved.