Product Overview
The ViLSOM LED Ceiling Light is a versatile lighting solution designed for various indoor spaces such as bathrooms, closets, and porches. It features both color-changing RGB modes and crisp white light options, controllable via an included wireless remote. A built-in motion sensor provides automatic illumination, enhancing convenience and safety. The light is battery-powered and USB rechargeable, offering flexible installation without complex wiring.
Figure 1: ViLSOM LED Ceiling Light, showing the light unit, remote control, and USB charging cable.
What's in the Box
Please check the package contents upon opening:
- ViLSOM LED Ceiling Light Unit
- Wireless Remote Control
- USB Charging Cable
- Mounting Accessories (e.g., adhesive pads, screws for drilling)
Setup and Installation
The ViLSOM LED Ceiling Light offers two primary installation methods: magnetic mounting for easy stick-on application or drill mounting for a more permanent fixture.
- Magnetic Mounting:
Ensure the mounting surface is clean and dry. Peel off the protective film from the adhesive pad on the magnetic base. Press the base firmly onto the desired surface. The light unit can then be magnetically attached to this base.
- Drill Mounting:
For a more secure installation, use the provided screws and anchors. Mark the desired drilling points using the magnetic base as a template. Drill pilot holes, insert anchors if necessary, and secure the magnetic base with screws. Attach the light unit magnetically.
Figure 2: Installation methods, showing magnetic stick-on and drill mounting options.
Before first use, ensure the light is fully charged using the provided USB cable. Connect the USB cable to the light unit and a standard USB power adapter (not included).
Operating Instructions
The ViLSOM LED Ceiling Light is controlled primarily by the included wireless remote control.
Remote Control Functions:
- Power On/Off: Press the ON/OFF button to turn the light on or off.
- Brightness Adjustment: Use the + and - buttons to increase or decrease brightness.
- Color Modes:
- White Light: Press the WHITE button for standard white illumination.
- RGB Colors: Select specific colors using the dedicated color buttons (e.g., RED, GREEN, BLUE, etc.).
- Color Changing Modes: Buttons like FLASH, STROBE, FADE, SMOOTH cycle through colors with different effects.
- Motion Sensor Activation: The light has a built-in motion sensor. Refer to the light unit itself for a physical switch or button to enable/disable motion detection, if available. When enabled, the light will automatically turn on when motion is detected in its range.
- Timer Settings: Some remotes may include timer buttons (e.g., 30min, 60min) to set the light to turn off automatically after a specified duration.
The light is suitable for various indoor environments, adapting to different needs from task lighting to ambient illumination.
Figure 3: Application examples of the ViLSOM LED Ceiling Light in various rooms.
Maintenance
- Cleaning: To clean the light, gently wipe the surface with a soft, dry cloth. Do not use abrasive cleaners or solvents, as they may damage the finish.
- Charging: Recharge the light when its brightness diminishes or it stops responding. Use the provided USB cable and a compatible USB power source. A full charge typically takes a few hours.
- Battery Care: For optimal battery life, avoid completely draining the battery frequently. If storing the light for an extended period, charge it periodically to maintain battery health.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | Battery is depleted. | Charge the light using the USB cable. |
| Remote control not working. | Remote battery is low or depleted. Obstruction between remote and light. | Replace the remote control battery. Ensure clear line of sight to the light. |
| Motion sensor not activating. | Motion sensor is disabled. Obstruction in sensor's field of view. | Check if the motion sensor feature is enabled on the light unit. Clear any obstructions. |
| Light flickers or dims unexpectedly. | Low battery. | Recharge the light. |
Specifications
| Feature | Detail |
|---|---|
| Brand | ViLSOM |
| Model Name | DPT-022 |
| Product Dimensions | 5"L x 3"W x 1.98"H |
| Item Weight | 14 ounces |
| Material | PCB+LED |
| Light Source Type | LED |
| Wattage | 5 watts |
| Power Source | Battery Powered |
| Control Method | Remote Control |
| Installation Type | Magnetic Mount |
| Special Features | Wireless, Motion Activated, RGB Color Changing |
| Indoor/Outdoor Usage | Indoor |
| Water Resistance Level | Not Water Resistant |
Warranty and Support
Specific warranty details for the ViLSOM LED Ceiling Light are not provided within this manual. Please refer to the product packaging, the retailer's website where the product was purchased, or the official ViLSOM brand store on Amazon for the most current warranty information and support contacts.
For further assistance or technical support, please visit the ViLSOM Store on Amazon or contact their customer service directly through the platform.
