LEDIARY 20'' Low Profile Ceiling Fan with Light and Remote

1. Important Safety Information

Please read and understand this entire manual before attempting to assemble, operate, or install the product. Failure to follow these instructions may result in electric shock, fire, or serious personal injury.

• Always disconnect power at the main circuit breaker before installation or maintenance.
• Ensure all electrical connections comply with local codes and ordinances.
• Consult a qualified electrician if you are unsure about wiring or installation.
• Do not install the fan in a location where blades could strike objects or people.
• Ensure the mounting structure can support the weight of the fan.

2. Package Contents

Verify that all components listed below are included in your package. If any parts are missing or damaged, please contact customer service.

• Fan Motor Host (Main Body)
• Ceiling Plate
• Fan Blade
• Light Arms (with LED strips)
• Remote Control
• Mounting Hardware (screws, wire nuts, wrench, screwdriver)
• DC Motor

Figure 2.1: Unpacked components of the LEDIARY Ceiling Fan.

3. Setup and Installation

NOTE: Disconnect the power supply at the circuit breaker before installing the fan to prevent electric shock.

3.1. Remove Mounting Plate

1. Loosen the four screws on the canopy.
2. Rotate counterclockwise to detach the mounting plate. (Tip: It does not need to be completely removed.)

3.2. Wire Fixing

1. Thread the screw arm and the wire of the connected port through the fan motor host together.
2. Secure the nut through the wire and the lamp pole. (Tip: Do not tighten to make it easier to adjust the bracket in the next step.)

Figure 3.2: Connecting wires and securing the nut during assembly.

3.3. Fixing the Light Arm

1. Lightly pull the wires to the proper length and secure the two light bodies together with the screws.
2. Use the supplied wrench to tighten all nuts clockwise.

Figure 3.3: Attaching and securing the light arms to the fan body.

3.4. Mounting Fan Blade

1. Rotate the cap clockwise to remove it.
2. Align the fan blade with the motor core, then screw in the fan blade cap counterclockwise to secure it.

Figure 3.4: Securing the fan blade to the motor.

3.5. Mounting Controller

1. Tear off the adhesive backing on the controller and secure it inside the back cover.
2. Connect each of the 3 wires to a port on the driver.

Figure 3.5: Connecting the controller and driver.

3.6. Mounting Fan to Ceiling

1. Install the ceiling bracket and hang the fan.
2. Connect ceiling wiring: black to black, white to white, and ground wires connected.
3. Rotate the ceiling fan to align with the grooves, then tighten all 4 screws.

Figure 3.6: Final mounting of the fan to the ceiling.

4. Operating Instructions

4.1. Remote Control

The included remote control allows for comprehensive operation of your ceiling fan. Ensure batteries (2 AAA, included) are installed.

• On/Off: Power the fan and light on or off.
• CCT Change: Adjust color temperature (3000K Warm, 4000K Natural, 6000K Cool).
• Brightness +/-: Adjust light brightness from 10% to 100%.
• Night Light: Activates a low-brightness, warm light setting.
• 6 Speed Setting: Select from 6 wind speeds (1-2 Soft, 3-4 Natural, 5-6 Cool).
• Forward/Reverse (F/R): Changes fan direction for summer (downward airflow) or winter (upward airflow) use.
• 2H Timer Setting: Sets the fan to turn off automatically after 2 hours.

Figure 4.1: Remote control functions.

4.2. App Control (Bluetooth)

Control your fan via the "Fanlamp Pro" app, available on Google Play or Apple App Store. Bluetooth is required for app control.

• Download and install the "Fanlamp Pro" app.
• Open the app and follow on-screen instructions to pair with your fan using the pairing button.
• The app provides full control over light settings (CCT, brightness, night light) and fan speeds (6 speeds, reverse function, timer).

Figure 4.2: App control interface.

4.3. Wall Switch Control

A conventional wall switch (not included) can control the fan and light on/off functionality. It does not support brightness or wind speed adjustment.

NOTE: Do not connect it to a transmission switch for light brightness or wind speed adjustment.

Figure 4.3: Wall switch operation.

4.4. Light Features

• Stepless Dimming: Adjust brightness from 10% to 100%.
• 3 Color Temperatures: Select between 3000K (Warm), 4000K (Natural), and 6000K (Cool) to suit your preference.
• Memory Function: The fan remembers your last light setting (color temperature and brightness) if the light is turned off for at least 5 seconds.

Figure 4.4: Dimmable light and color temperature options.

4.5. Fan Features

• 6 Wind Speeds: Offers a range from soft breeze (1-2) to strong cool wind (5-6).
• Reversible DC Motor: Provides downward airflow for cooling in summer and upward airflow for warm air circulation in winter.
• Quiet Operation: The pure copper motor ensures ultra-quiet operation, typically below 30dB.
• Timer Setting: Set the fan to operate for a specific duration (e.g., 2 hours) before automatically turning off.

Figure 4.5: Reversible airflow and wind speed settings.

5. Maintenance

• Cleaning: To clean the fan, wipe with a soft, damp cloth. Do not use abrasive cleaners or solvents.
• Inspection: Periodically check all connections and mounting hardware to ensure they are secure.
• Lubrication: The motor is permanently lubricated and does not require additional oiling.

6. Troubleshooting

7. Specifications

8. Warranty and Support

LEDIARY provides 2-year support for this ceiling fan. If you encounter any questions during installation or use, please feel free to contact us. We are committed to providing excellent customer service.

For assistance, please visit the LEDIARY Store on Amazon or refer to the contact information provided in your product packaging.