1. Introduction
This manual provides comprehensive instructions for the safe and correct installation, operation, and maintenance of your OVE Decors Breeze 36-inch Corner Shower Enclosure. Please read all instructions carefully before beginning installation and retain this manual for future reference. Proper installation is crucial for the product's functionality and longevity.
2. Safety Information
WARNING: Improper installation or use can result in injury or product damage.
- Always wear appropriate personal protective equipment (PPE) during installation, including safety glasses and gloves.
- Handle glass panels with extreme care. Tempered glass, while strong, can shatter if struck at the edges or corners.
- Ensure the installation surface is level and structurally sound to support the weight of the shower enclosure.
- Professional installation is recommended for optimal safety and performance.
- Do not use abrasive cleaners or tools on glass or hardware, as this can cause damage.
Figure 2.1: Premium 5/16 inch (8mm) tempered safety glass is used for enhanced durability and safety.
3. Package Contents
Verify that all components are present and undamaged before beginning installation. If any parts are missing or damaged, contact OVE Decors customer support.
- Glass Door Panel
- Inline Glass Panel
- Side Glass Panel
- Shower Base Pan (36 in. x 36 in. x 2 3/4 in.)
- Hardware Kit (hinges, handle, magnetic strips, seals, fasteners)
Figure 3.1: Included components for the OVE Decors Breeze shower enclosure.
4. Specifications
| Feature | Detail |
|---|---|
| Model Number | 15SKS-PANA36-BLKWM |
| Overall Dimensions (D x W x H) | 35.98 x 35.98 x 74.76 inches (91.4 x 91.4 x 189.9 cm) |
| Shower Base Size | 36 in. x 36 in. x 2 3/4 in. |
| Glass Thickness | 8mm (5/16 inch) Tempered Glass |
| Material | Glass, Fiberglass-reinforced Acrylic (Base), Metal (Hardware) |
| Finish | Black (Hardware) |
| Installation Type | Screw-In |
| Item Weight | 171.5 Pounds |
| UPC | 828796141703 |
Figure 4.1: Dimensional diagram of the OVE Decors Breeze 36-inch Corner Shower Enclosure.
5. Setup and Installation
This section outlines key aspects of the shower enclosure setup. Refer to the detailed installation guide provided with your product for step-by-step instructions.
5.1. Pre-Installation Checks
- Ensure the shower area is properly prepared, including plumbing for the drain and finished walls.
- Confirm the floor is level and capable of supporting the enclosure.
- Gather all necessary tools as specified in the detailed installation guide.
5.2. Shower Base Installation
The shower base is constructed from 5-layer fiberglass and resin, featuring a sturdy high-support ring design for stability. It is designed to fit a standard 2-inch compression fitted drain (drain not included). A mortar base is required for proper installation.
Figure 5.1: Shower base drain compatibility.
Figure 5.2: Shower base construction details.
The shower base comes with 3 attachable flanges, allowing for installation in both corner and alcove setups. Two flanges are needed for a corner setup, and three for an alcove setup.
Figure 5.3: Flange installation for different shower configurations.
5.3. Door and Panel Installation
The frameless design features a Panama Hinge-to-Wall Shower Door System, ensuring a modern aesthetic and reliable function. The door and base are reversible, allowing for left or right wall installation and flexible drain placement.
Figure 5.4: Detail of the Panama Hinge-to-Wall Shower Door System hardware.
Figure 5.5: Reversible door and base installation options.
The door features a built-in magnetic strip for a secure and tight close, preventing leaks and ensuring a dry bathroom floor.
Figure 5.6: Magnetic strip for secure door closure.
6. Operating Instructions
The OVE Decors Breeze shower door operates on a hinge system. To open, gently pull the handle outwards. To close, push the door until the magnetic strips engage, ensuring a complete seal. Avoid forcing the door or allowing it to slam shut to prevent damage to the glass or hardware.
7. Maintenance
Regular cleaning and maintenance will preserve the appearance and functionality of your shower enclosure.
7.1. Glass Cleaning
- Use a soft cloth or sponge with a non-abrasive glass cleaner or a solution of mild soap and water.
- Wipe down the glass after each use to prevent water spots and soap scum buildup.
- Avoid harsh chemicals, abrasive pads, or scouring powders, as these can scratch the glass or damage protective coatings.
7.2. Hardware Cleaning
- Clean metal hardware (hinges, handle) with a soft, damp cloth and mild soap.
- Dry thoroughly to prevent water spots.
- Do not use abrasive cleaners, ammonia-based products, or harsh chemicals on the hardware finish.
7.3. Shower Base Cleaning
- The fiberglass-reinforced acrylic base has an easy-to-clean construction. Use non-abrasive bathroom cleaners.
- Regularly clean the drain area to prevent blockages.
8. Troubleshooting
This section addresses common issues you might encounter.
8.1. Leaks
- Issue: Water leaking from around the door or panels.
Solution: Check that all seals and magnetic strips are properly aligned and free from debris. Ensure the door closes completely and the magnetic strip engages. Verify that all silicone seals applied during installation are intact.
8.2. Door Not Closing Properly
- Issue: Door does not align or close securely.
Solution: Inspect hinges for proper alignment and tightness. Ensure the magnetic strips are clean and making full contact. Check for any obstructions in the door's path.
8.3. Water Spots on Glass
- Issue: Mineral deposits or water spots on glass.
Solution: Use a squeegee after each shower. For existing spots, use a specialized glass cleaner designed for hard water stains.
9. Warranty and Support
For warranty information or technical assistance, please contact OVE Decors customer support. Keep your proof of purchase and model number (15SKS-PANA36-BLKWM) readily available when contacting support.
Visit the OVE Decors Store for more information: OVE Decors Store
