1. Introduction
Thank you for choosing the VINGLI Tall Dresser. This manual provides essential information for the safe assembly, operation, and maintenance of your new 5-drawer fluted chest. Please read these instructions carefully before beginning assembly and retain them for future reference.
Image 1.1: VINGLI Tall Dresser (Oak, 5 Drawers)
2. Safety Information
To ensure safe use of your dresser, please observe the following guidelines:
- Anti-Tipping Device: It is crucial to install the included metal anti-tipping bracket to prevent the dresser from tipping over, especially in households with children. Securely fasten the dresser to the wall as instructed.
- Weight Limits: Do not exceed the maximum weight capacity. The tabletop can support up to 220 lbs, and each drawer can accommodate up to 30 lbs. Distribute weight evenly.
- Rounded Edges: The dresser features smooth rounded edges to reduce the risk of injury from accidental bumps.
- Stable Placement: Place the dresser on a flat, stable surface. Uneven surfaces can compromise stability.
- Children Safety: Never allow children to climb on drawers or the dresser. Keep heavy items in lower drawers.
Image 2.1: Safety and Stability Features (Anti-Tipping Bracket, Anti-Slip Foot Pad, Mending Wedge)
3. Package Contents
Before assembly, please verify that all components are present and undamaged. If any parts are missing or damaged, contact customer support immediately.
- Dresser Panels (Top, Bottom, Sides, Back)
- 5 Drawer Units (Fronts, Sides, Backs, Bottoms)
- Hardware Bag (screws, dowels, drawer slides, handles, anti-tipping kit)
- Instruction Manual
4. Assembly Instructions
Assembly is required for this dresser. A detailed assembly manual with text and schematic instructions is included in the package. Please follow it carefully for a smooth setup process.
- Unpack: Carefully remove all components from the packaging and lay them out on a clean, soft surface to prevent scratches.
- Identify Parts: Refer to the parts list in the included manual to identify each component.
- Assemble Frame: Follow the step-by-step diagrams to assemble the main frame of the dresser. Ensure all connections are secure.
- Assemble Drawers: Construct each of the five drawers, attaching the fluted fronts and installing the full-extension soft-close drawer slides.
- Install Drawers: Carefully slide the assembled drawers into the dresser frame.
- Attach Handles: Secure the glossy golden handles to the drawer fronts.
- Install Support Base: Attach the thickened support base, including the four 1.42" thick wooden legs, four 1.57" support wood bars, and the extra 1.57" middle leg for enhanced stability.
- Secure Anti-Tipping Device: Attach the metal anti-tipping bracket to the back of the dresser and securely fasten it to a wall stud using appropriate hardware.
Tools required (not included): Phillips head screwdriver, hammer.
Image 4.1: Thickened Support Base Structure
Image 4.2: Fluted Pattern and Handle Detail
5. Operating Instructions
Your VINGLI Tall Dresser is designed for convenient and quiet storage.
- Drawer Operation: The drawers are equipped with quality three-section full-extension soft-close drawer slides. This allows the drawers to open and close effortlessly and quietly, providing full access to the drawer's contents and preventing slamming.
- Storage: Utilize the five spacious drawers for organizing clothing, linens, or other personal items. Ensure items are placed within the 30 lbs weight limit per drawer.
Image 5.1: Full-Extension Drawer with 12.8" Depth
6. Maintenance
Proper care will extend the life and appearance of your dresser.
- Cleaning: Wipe the surface with a dry, soft cloth. Avoid abrasive cleaners or harsh chemicals that may damage the veneer finish. The surface is designed to be waterproof, helping to avoid water/moisture damage.
- Hardware Check: Periodically check all screws and fasteners to ensure they remain tight. Tighten if necessary.
- Drawer Slides: If drawer slides become stiff, a small amount of silicone lubricant can be applied to the tracks.
7. Troubleshooting
If you encounter any issues with your dresser, refer to the following common problems and solutions:
- Dresser is Wobbly:
- Ensure the dresser is on a level surface.
- Check that all assembly screws are tightened.
- Verify the thickened support base and mending wedges are correctly installed.
- Drawers Do Not Close Smoothly:
- Check for any obstructions in the drawer slides.
- Ensure the drawer slides are properly aligned and securely attached to both the drawer and the dresser frame.
- Do not overload drawers beyond the 30 lbs capacity.
8. Specifications
| Feature | Detail |
|---|---|
| Brand | VINGLI |
| Model Number | FD0OW5D |
| Product Dimensions (D x W x H) | 15.6" x 29.92" x 44.88" |
| Number of Drawers | 5 |
| Material | Engineered Wood with Veneer Finish |
| Color | Oak |
| Tabletop Weight Capacity | 220 lbs |
| Each Drawer Weight Capacity | 30 lbs |
| Drawer Type | Metal Silent Full-Extension Drawer Slide |
| Special Features | Fluted Drawer Front, Glossy Golden Handle, Rounded Edges, Thickened Support Base, Metal Anti-Tipping Bracket, Anti-Slip Foot Pad, Mending Wedge |
Image 8.1: Product Dimensions and Capacities
Image 8.2: Smooth Curved Edge Design
9. Warranty and Support
Your VINGLI Tall Dresser comes with a 1-Year Quality Warranty, covering manufacturing defects and material flaws under normal use.
For any questions, concerns, or assistance with assembly, missing parts, or warranty claims, please contact VINGLI-Direct Customer Support. Refer to your purchase documentation for specific contact details or visit the VINGLI brand store online.