1. Introduction
Thank you for choosing the IAGREEA IA-NM100 8-in-1 Nut Milk Maker Machine. This appliance is designed to help you prepare fresh, homemade plant-based milks and other beverages with ease. Please read this manual thoroughly before operating the machine to ensure safe and efficient use. Keep this manual for future reference.
2. Safety Precautions
- Always ensure the machine is placed on a stable, flat, and dry surface.
- Do not immerse the main unit in water or any other liquid.
- Keep out of reach of children.
- Do not operate the machine with a damaged power cord or plug.
- Ensure the lid is securely closed before starting any program. The machine features a safety lock and will display an E4 warning if the lid is unsecured.
- The internal components and lid that come into contact with food are made of food-safe stainless steel and are BPA-free.
- Avoid touching the blades when the machine is plugged in or operating.
- Unplug the machine from the power outlet when not in use and before cleaning.
- Allow the machine to cool down before cleaning or storing.
3. Product Components
The IAGREEA Nut Milk Maker comes with the following components:
- Nut Milk Maker Machine (Main Unit)
- Power Cord
- Recipe Book
- Instruction Manual (this document)
- Cleaning Brush
- Measuring Cup

4. Product Overview
The IAGREEA Nut Milk Maker features a sleek design with a stainless steel interior and lid, ensuring food safety. It has an intuitive LED touchscreen for easy operation.



5. Setup and First Use
5.1 Unpacking and Initial Cleaning
- Carefully remove all components from the packaging.
- Wash the interior of the machine, the lid, and the measuring cup with warm, soapy water. Rinse thoroughly and dry.
- Wipe the exterior of the main unit with a damp cloth. Do not immerse the main unit in water.
5.2 Preparing for Operation
- Place the machine on a stable, flat, and dry surface.
- Ensure the power cord is securely connected to the machine and a grounded electrical outlet.

6. Operating Instructions
The IAGREEA Nut Milk Maker features 8 pre-programmed functions for various beverages. No pre-soaking of ingredients is required for most programs.
6.1 Basic Operation
- Add your desired ingredients (e.g., nuts, oats, soybeans) into the machine.
- Add water, ensuring it is between the MIN and MAX fill lines indicated inside the machine.
- Securely close the lid.
- Plug in the machine. The LED display will illuminate.
- Press the 'Menu' button to cycle through the available programs.
- Once your desired program is selected, press the 'Start/Cancel' button to begin.
- The machine will automatically complete the program and beep when finished.
6.2 Available Programs
The machine offers the following programs:
- Hot Programs:
- Soy Milk (approx. 36 minutes)
- Rice Paste (approx. 37 minutes)
- Corn Juice (approx. 36 minutes)
- Boil Water (approx. 12 minutes)
- Cold Programs:
- Nut Milk (approx. 8 minutes)
- Milkshake (approx. 2 minutes)
- Oat Milk (approx. 2 minutes)
- Cleaning Program:
- Clean (approx. 8 minutes)

6.3 Keep Warm and Delay Start Functions
- Keep Warm: After a hot program finishes, the machine automatically enters a 2-hour keep warm mode. You can also select a separate 'Keep Warm' program as needed.
- Delay Start (Preset): The delayed activation function allows you to set a timer for up to 12 hours. Add ingredients, set the desired program and delay time, and the machine will start automatically.

7. Cleaning and Maintenance
Regular cleaning ensures optimal performance and hygiene of your nut milk maker.
7.1 Self-Cleaning Function
- After use, rinse the interior of the machine to remove large food particles.
- Add water up to the MIN fill line and a small amount of dish soap (optional).
- Close the lid securely.
- Select the 'Clean' program on the LED touchscreen and press 'Start/Cancel'. The machine will run for approximately 8 minutes.
- Once the cleaning cycle is complete, unplug the machine, discard the water, and rinse the interior thoroughly.

7.2 Manual Cleaning
- For stubborn residue, use the provided cleaning brush to scrub the interior and around the blades.
- Ensure all parts are completely dry before storing the machine.
8. Troubleshooting
If you encounter any issues with your IAGREEA Nut Milk Maker, please refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Machine does not start | Power cord not properly connected; Lid not securely closed. | Check power connection; Ensure lid is firmly in place until it clicks. |
| E4 Error displayed | Lid is not properly secured. | Remove and re-secure the lid, ensuring it is fully closed. |
| Unusual noise during operation | High-speed motor operation (normal); Ingredients too hard or too much. | Some noise is normal due to the powerful motor. Ensure ingredients are within recommended limits. |
| Milk is not smooth enough | Insufficient blending time; Too many ingredients. | Ensure correct program is selected. Reduce ingredient quantity if necessary. |

9. Specifications
| Feature | Detail |
|---|---|
| Brand | IAGREEA |
| Model Number | IA-NM100 |
| Color | White |
| Capacity | 35 oz (1 Liter) / 2.2 Pounds |
| Product Dimensions | 6.18"D x 8.11"W x 10.94"H |
| Power Source | AC |
| Voltage | 120 Volts |
| Controls Type | Touch |
| Material Type Free | BPA Free |
| Blade Material | Stainless Steel (8-blade design) |
| Container Material | Stainless Steel |
| Special Features | Ergonomic Handle, Keep Warm Setting, Multiple Attachments, Safety Lock, Scheduled start function |
10. Warranty and Support
The IAGREEA IA-NM100 Nut Milk Maker Machine comes with a limited warranty. For specific details regarding your warranty coverage, please refer to the warranty card included in your product packaging or contact IAGREEA customer support.
Customer Support
If you have any questions, require assistance, or need to report an issue, please contact our customer support team:
- Website: Visit the IAGREEA Store on Amazon
- Email: [Insert Customer Support Email Here]
- Phone: [Insert Customer Support Phone Number Here]
Please have your model number (IA-NM100) and purchase date ready when contacting support.