Introduction
Thank you for purchasing the Anfilank Portable Electric Kettle BY-K20A. This compact and versatile kettle is designed for convenience, offering precise temperature control and a keep-warm function, ideal for travel and daily use. Please read this manual thoroughly before use to ensure safe and optimal operation.
The Anfilank Portable Electric Kettle offers 6 temperature settings for various drinks, from 45°C for warm water to 100°C for boiling tea.
Key features of your Anfilank Portable Electric Kettle include:
- 6-Stage Temperature Control: Select from 45°C, 55°C, 70°C, 80°C, 90°C, and 100°C to suit your beverage needs.
- 12-Hour Keep Warm Function: Maintains your desired water temperature for up to 12 hours.
- Wide Voltage Compatibility: Supports AC100-240V, making it suitable for use in Japan and overseas without a voltage converter.
- Double-Layer Construction: Features an inner 304 stainless steel layer and an outer heat-resistant PP plastic layer to prevent burns.
- Compact and Portable Design: Easy to carry in bags or suitcases, perfect for travel, office, or outdoor activities.
- Fast Boiling: Boils 200ml of water in approximately 4.5 minutes.
- Triple Safety Protection: Includes automatic power-off after boiling, overheat protection, and boil-dry protection.
Safety Precautions
To prevent injury or damage to the product, please observe the following safety guidelines:
- Always ensure the kettle is connected to a power outlet when using the heating or keep-warm functions. This product is not rechargeable.
- Do not heat any liquids other than water in this kettle. Heating other liquids may cause damage or safety hazards.
- When boiling water, always ensure the lid is securely tightened and the steam cover is open before initiating the heating process.
- The actual temperature during the keep-warm function may fluctuate within ±5°C of the set target temperature due to the internal heating program.
- Avoid touching the touch panel and LCD digital display with wet hands or exposing them to dirt/moisture during cleaning, as this may lead to contact issues. Gently wipe with a soft, dry cloth.
- Keep the kettle out of reach of children and pets, especially during operation, despite its double-layer burn prevention design.
- Ensure the power cord is not tangled or obstructing the kettle's stability during use.
Product Overview
Familiarize yourself with the components and design of your Anfilank Portable Electric Kettle.
The kettle features a double-layer design for safety, an LCD digital display, and touch buttons for easy operation.
- Inner Layer: Made of high-quality 304 stainless steel for durability and safe water contact.
- Outer Layer: Constructed from heat-resistant PP plastic, providing insulation and burn protection.
- LCD Digital Display: Shows the current water temperature and selected settings.
- Touch Buttons: For power on/off and temperature selection.
- Waterproof Silicone Cover: Protects the power inlet.
- Non-slip Base: Ensures stability during use.
- Exhaust Port: Releases steam safely during boiling.
Setup
Before first use, and for regular deep cleaning, follow these steps:
- Fill the kettle with water up to the MAX line.
- Add approximately 15g of vinegar or citric acid to the water.
- Boil the water with the vinegar/citric acid mixture.
- After boiling, let the mixture stand in the kettle for 1 hour.
- Pour out the mixture and rinse the interior of the kettle thoroughly with clean water.
Operating Instructions
Follow these steps to heat water with your Anfilank Portable Electric Kettle:
A visual guide to the simple operation of the kettle: fill, plug in, open steam cover, select temperature, and enjoy.
- Fill Water: Open the lid and fill the kettle with water. Do not exceed the 'MAX' fill line indicated inside the kettle.
- Connect Power: Plug the power cord into the kettle's power inlet, then plug the other end into a suitable electrical outlet (AC100-240V).
- Open Steam Cover: Ensure the small steam cover on the lid is open to allow steam to escape during boiling.
- Select Temperature: Touch the power/temperature selection button on the kettle's body. The LCD display will show the current temperature. Continue touching to cycle through the available temperature settings (45°C, 55°C, 70°C, 80°C, 90°C, 100°C).
- Heating: The kettle will begin heating to your selected temperature. Once the target temperature is reached, the kettle will automatically switch to the 12-hour keep-warm mode.
- Serve: Carefully pour the hot water. Close the steam cover and lid when not in use.
Maintenance and Cleaning
Regular cleaning ensures the longevity and hygiene of your kettle.
- Exterior Cleaning: Wipe the exterior of the kettle with a soft, damp cloth. Do not use abrasive cleaners or immerse the kettle body in water.
- Interior Cleaning (Descaling): Perform the initial setup cleaning steps (fill with water and vinegar/citric acid, boil, soak, rinse) regularly, especially if you notice mineral deposits (limescale) inside the kettle.
- Lid and Seal: Clean the lid and silicone seal with warm, soapy water and rinse thoroughly. Ensure they are dry before reattaching.
- Touch Panel/LCD: As mentioned in safety precautions, gently wipe the touch panel and LCD display with a soft, dry cloth. Avoid moisture.
- Storage: When not in use, ensure the kettle is clean and dry. Store it in a cool, dry place. The detachable power cord allows for compact storage.
Troubleshooting
If you encounter any issues with your kettle, please refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Kettle does not power on. | Power cord not securely plugged in; power outlet malfunction. | Ensure the power cord is firmly connected to both the kettle and a working electrical outlet. Try a different outlet. |
| Water is not heating. | Insufficient water; steam cover closed; safety feature activated. | Check water level (must be above MIN line). Ensure steam cover is open. If boil-dry protection activated, let cool before restarting. |
| Kettle feels unstable. | Uneven surface; power cord tension. | Place the kettle on a flat, stable surface. Ensure the power cord is straightened and not pulling on the kettle. |
| Touch panel unresponsive. | Dirt or moisture on the panel. | Wipe the touch panel gently with a soft, dry cloth to remove any dirt or moisture. |
If the problem persists after trying these solutions, please contact customer support.
Specifications
Detailed specifications including dimensions, capacity, and power requirements for the kettle.
| Feature | Detail |
|---|---|
| Manufacturer | Anfilank |
| Model Number | BY-K20A |
| Product Dimensions | 82 x 82 x 227 mm |
| Package Dimensions | 25.4 x 10.9 x 10.7 cm |
| Material | Inner: 304 Stainless Steel, Outer: PP Plastic |
| Color | Black |
| Capacity | 380 ml (0.4 L) |
| Wattage | 300 W |
| Voltage | AC100-240V, 50-60Hz |
| Other Features | Temperature Control, Keep Warm Function |
| Package Weight | 0.66 kg |
| Battery Use | No |
Warranty and Support
Your Anfilank Portable Electric Kettle BY-K20A is backed by our commitment to quality and customer satisfaction.
- Manufacturer's Warranty: This product comes with a 1-year manufacturer's warranty from the date of purchase.
- Quality Assurance: All portable kettles undergo a comprehensive inspection before shipment to ensure quality.
- Defect Policy: In the unlikely event of a product defect, we offer prompt exchange, return, or refund services.
- Customer Support: For any questions or concerns regarding product use, please do not hesitate to contact us. Our dedicated customer support team aims to respond within 24 hours.
- How to Contact Support: To reach our customer support, please navigate to your Amazon account: "Account Service" > "Order History" > locate your order > click on the "Seller" > then select "Ask a question".
