Vicue Replacement Shaver Head Trimmer User Manual

1. Introduction

This manual provides instructions for the installation, operation, and maintenance of your Vicue Replacement Shaver Head Trimmer. This product is designed to replace worn or damaged trimmer heads on compatible Philips Norelco electric shavers, ensuring continued optimal performance for your grooming needs.

Figure 1: Vicue Replacement Shaver Head Trimmer with its comb attachment.

2. Compatible Models

The Vicue Replacement Shaver Head Trimmer is compatible with a wide range of Philips Norelco electric shaver models. Please verify your shaver's model number against the list below to ensure compatibility.

Applicable Models:

• RQ Series: RQ1050, RQ1051, RQ1052, RQ1053, RQ1059, RQ1060, RQ1061, RQ1062, RQ1075, RQ1076, RQ1077, RQ1085, RQ1087, RQ1090, RQ1095, 1050x, 1059x, 1090x, RQ1131, RQ1145, RQ1150, RQ1151, RQ1155, RQ1160, RQ1170, RQ1175, RQ1178, RQ1180, RQ1185, RQ1195, 1150X, 1160CC, 1160X, 1160XCC, 1165X, 1170X, 1180CC, 1180X, RQ1250, RQ1260, RQ1261, RQ1280, RQ1290, RQ1250cc, RQ1260c, RQ1280cc, RQ1290cc, 1250X, 1260X, 1280X, 1290X, 1250cc, 1260cc, 1280cc, 1285cc, 1290cc, 1295cc, RQ330, RQ310, RQ311, RQ320, RQ330, RQ350, RQ360, RQ370, RQ310, RQ311, RQ320, RQ330, RQ328, RQ331, RQ350, RQ360, RQ361, RQ370, RQ371
• YS Series: YS523, YS524, YS525, YS526, YS528
• S Series (S500-S571): S510, S511, S512, S520, S530, S531, S538, S550, S551, S560, S561, S570, S571
• S5000 Series: S5000, S5008, S5010, S5011, S5013, S5015, S5050, S5070, S5071, S5072, S5075, S5076, S5077, S5078, S5079, S5080, S5081, S5082, S5085, S5086, S5090, S5095, S5100, S5110, S5130, S5140, S5205, S5210, S5212, S5213, S5214, S5215, S5216, S5230, S5231, 5251, S5252, S5270, S5271, S5272, S5278, S5335, S5340, S5351, S5370, S5380, S5390, S5391, S5395, S5400, S5510, S5420, S5510, S5560, S5570, S5570, S5370, S5571, S5600, S5620, S7510
• S6000 Series: S6011, S6550, S6580, S6840
• S7000 Series: S7310, S7311, S7320, S7370, S7371, S7510, S7521, S7530, S7710, S7720, S7780, S7980
• S8000 Series: S8860, S8870, S8880, S8980
• S9000 Series: S9031, S9111, S9151, S9152, S9181, S9182, S9311, S9511, S9512, S9521, S9522, S9711, S9712, S9721, S9731, S9751, S9781, S9800, S9911, S9988, SW9700, SP9861, 9880, 9863, 9860, 9851, 9811

3. Setup and Installation

Replacing your shaver head trimmer is a simple process due to its snap-in design. Follow these steps for proper installation:

1. Power Off: Ensure your electric shaver is turned off and unplugged from any power source.
2. Remove Old Head: Gently pull the existing shaver head trimmer straight up from the shaver body. It should detach with a slight pull.
3. Align New Head: Take the new Vicue Replacement Shaver Head Trimmer. Align the base of the new head with the corresponding slot on the shaver body.
4. Snap into Place: Press the new head down firmly until you hear a click, indicating it has securely snapped into place.
5. Attach Comb (Optional): If you intend to use the comb attachment for length settings, slide it onto the trimmer head until it clicks securely.

Figure 2: Visual guide for installing the replacement shaver head. The card-in design facilitates easy attachment.

4. Operating Instructions

The Vicue Replacement Shaver Head Trimmer is designed for precise trimming, styling, and shaving. Its curved blade and comb teeth are engineered to prevent skin irritation.

• General Use: Turn on your shaver. Gently guide the trimmer head across the area you wish to trim or shave.
• Contour Following: The trimmer head is designed to fit perfectly into the contours of your face, from the curve of your chin to the angle of your neck, allowing for a smooth and even trim.
• Length Settings: The included beard repair comb has 5 length settings. Adjust the comb to your desired length before trimming.
• Precision Trimming: Use the trimmer without the comb attachment for precise detailing and shaping of beard lines, sideburns, or mustaches.

5. Maintenance and Cleaning

Regular cleaning of your shaver head trimmer is essential for maintaining its performance and hygiene. Follow these steps after each use:

1. Turn Off and Detach: Ensure the shaver is turned off and unplugged. Detach the trimmer head from the shaver body.
2. Rinse: Hold the trimmer head under warm running water to rinse away hair clippings and debris. You may use a mild soap if necessary, but ensure it is thoroughly rinsed off.
3. Air Dry: Shake off excess water and allow the trimmer head to air dry completely before reattaching it to the shaver or storing it. Do not use a cloth to dry the blades as this can damage them.
4. Lubrication (Optional): Periodically, a drop of light machine oil (specifically designed for shavers) can be applied to the blades to maintain smooth operation and extend blade life.

Figure 3: The trimmer head and comb, showing the blade and comb teeth design for easy cleaning.

6. Troubleshooting

If you encounter issues with your Vicue Replacement Shaver Head Trimmer, refer to the following common problems and solutions:

If the problem persists after attempting these solutions, please contact customer support.

7. Specifications

• Product Type: Replacement Shaver Head Trimmer
• Brand: Vicue
• Item Weight: 1.76 ounces
• Manufacturer: Goodicare
• ASIN: B0DZ5CG9VT
• Compatibility: Refer to Section 2 for a comprehensive list of compatible Philips Norelco shaver models.

8. Warranty and Support

This product is manufactured with high-quality materials and subjected to strict quality testing. For any assistance, questions, or concerns regarding your Vicue Replacement Shaver Head Trimmer, please do not hesitate to contact the seller directly through the platform where you purchased the product.

Your satisfaction is important to us, and we are committed to providing support for our products.