YOU LIAN MT-130 Automatic Desktop Labeling Machine User Manual

1. Introduction

This manual provides detailed instructions for the safe and efficient operation, setup, maintenance, and troubleshooting of the YOU LIAN MT-130 Automatic Desktop Sticker Labeling Machine. Please read this manual thoroughly before operating the machine to ensure proper usage and to prevent damage or injury.

2. Safety Instructions

• Always ensure the machine is properly grounded before connecting to a power source.
• Disconnect power before performing any maintenance, cleaning, or adjustments.
• Keep hands and loose clothing away from moving parts during operation.
• Operate the machine in a well-ventilated area.
• Do not bypass safety features, such as the emergency stop switch.
• Use only specified voltage (110V 60HZ) for power supply.
• Ensure all components are securely fastened before operation.

3. Product Overview

The YOU LIAN MT-130 is an automatic desktop labeling machine designed for applying self-adhesive labels to round bottles, jars, and cans. It features a compact design, a touch panel for control, and adjustable settings for various bottle and label sizes.

Figure 3.1: Overview of the MT-130 machine with key components labeled, including the label tray, lifting mechanism, labeling head, labeling mechanism, conveyor line, touch panel, electrical box, emergency stop switch, pressure marking sponge speed control, and conveyor line speed control.

Figure 3.2: Diagram illustrating the compatible label roll and bottle dimensions. Label outer diameter ≤ 300 mm, inner diameter = 76 mm, width range 10-110 mm, length range 15-300 mm. Bottle diameter ∅ 20-120 mm, height ≤ ∅x3 mm.

Figure 3.3: Examples of product categories suitable for labeling with the MT-130, including cosmetic, personal care, food, and beverage bottles.

Key Features:

• Labeling Quality: Utilizes a spring cover belt for smooth, wrinkle-free labeling, enhancing packaging quality.
• Advanced Control System: Features a PLC+ touch screen interface for user-friendly operation.
• High Stability: Incorporates a senior electric eye control system for precise label application.
• Compact Design: Simple and compact machine structure for ease of operation and maintenance.
• Optional Ribbon Coder: Can be equipped with a ribbon coding printer for LOTS, production date, or expiration date printing.

Figure 3.4: Left: Detail of the automatic imported fiber amplifier and electric eye sensor for accurate label induction. Right: View of the labeling belt, designed for smooth and flat label application without wrinkles or bubbles.

Figure 3.5: Close-up view of the label roll and its feeding mechanism, showing how labels are dispensed for application.

4. Specifications

5. Setup

5.1 Unpacking and Placement

1. Carefully unpack the machine and all accessories from the packaging.
2. Place the machine on a stable, level surface capable of supporting its weight (approx. 331 lbs).
3. Ensure adequate space around the machine for operation, maintenance, and material handling.

5.2 Power Connection

1. Verify that the local power supply matches the machine's requirements (110V 60HZ).
2. Connect the power cord to a grounded electrical outlet.

5.3 Loading Labels

1. Place the label roll onto the label tray spindle, ensuring it rotates freely.
2. Thread the label web through the designated guides and rollers, past the electric eye sensor, and onto the take-up reel. Refer to Figure 3.5 for visual guidance on the label path.
3. Ensure the label web is taut and aligned correctly to prevent skewing during application.

5.4 Adjusting for Bottles

1. Adjust the conveyor line width to match the diameter of your bottles.
2. Adjust the height of the labeling head and pressure marking sponge to ensure proper contact with the bottle and label.
3. Use the adjustment knobs to fine-tune the position of the label applicator relative to the bottle.

6. Operation

6.1 Initial Power On

1. After completing setup, turn on the main power switch.
2. The touch panel will illuminate.

6.2 Touch Panel Controls

• The English operation panel allows for easy control and testing.
• Adjust the label separating speed as needed.
• Set the delay time for label separation to optimize application timing.
• Monitor machine status and adjust parameters via the touch screen.

6.3 Labeling Process

1. Place bottles onto the conveyor line.
2. Start the conveyor using the control panel.
3. As bottles pass the electric eye sensor, labels will be automatically dispensed and applied.
4. Adjust the conveyor line speed and pressure marking sponge speed controls (refer to Figure 3.1) to achieve optimal labeling results.
5. Ensure labels are applied smoothly and without wrinkles or bubbles.

6.4 Emergency Stop

In case of any malfunction or emergency, press the red emergency stop switch immediately to halt all machine operations.

7. Maintenance

7.1 Daily Maintenance

• Clean the machine surfaces, especially the conveyor belt and labeling head, to remove any dust, label residue, or spills.
• Inspect the label path for any obstructions or wear on rollers.

7.2 Weekly Maintenance

• Check all electrical connections for tightness and signs of wear.
• Lubricate moving parts as indicated in the machine's specific lubrication points (refer to detailed diagrams if available).
• Inspect the electric eye sensor for cleanliness and proper alignment.

7.3 Accessory Management

The machine comes with a set of accessories for installation and replacement of aged parts. Keep these tools organized and accessible for future maintenance needs.

8. Troubleshooting

9. Warranty and Support

For warranty information, technical support, or service inquiries, please refer to the documentation provided with your purchase or contact your authorized YOU LIAN distributor or seller. Keep your purchase receipt and model number (MT-130) handy when contacting support.