Introduction
Thank you for choosing the ROJECO PTM-30A3 2-in-1 Automatic Cat Feeder and Water Dispenser. This device is designed to provide your pet with consistent access to fresh food and water, simplifying pet care and ensuring their well-being. Please read this manual thoroughly before use to ensure proper operation and maintenance.
Image: The ROJECO PTM-30A3 unit, showcasing its dual food and water compartments, control panel, and feeding/watering trays.
Setup
1. Unboxing and Component Check
Carefully remove all components from the packaging. Verify that all parts are present:
- Main Feeder/Water Dispenser Unit
- Food Storage Container (5L capacity)
- Water Reservoir (3.5L capacity)
- Food Tray
- Water Tray
- Power Adapter
- User Manual
2. Assembly
- Place the main unit on a flat, stable surface.
- Attach the food tray to the designated slot on the food dispenser side.
- Attach the water tray to the designated slot on the water dispenser side.
- Ensure both trays are securely in place.
3. Filling the Containers
- Food Container: Open the lid of the food storage compartment. Pour dry pet food into the container. Do not overfill. Close the lid securely.
- Water Reservoir: Remove the water reservoir from the main unit. Fill it with clean drinking water. Reinsert the reservoir into its slot, ensuring it is properly seated and water begins to flow into the water tray.
Image: The ROJECO PTM-30A3 unit with labels indicating the 5L food capacity and 3.5L water fountain capacity.
4. Power Connection
Connect the power adapter to the unit's power port and then plug it into a standard electrical outlet. The device will power on, and the display screen will activate.
Operating Instructions
1. Control Panel Overview
The control panel features a display screen and several buttons/dials for setting up feeding schedules. Refer to the on-screen prompts for navigation.
Image: The ROJECO PTM-30A3 unit with a cat, illustrating the control panel and icons representing hourly settings, meal settings, battery reminder, and fault reminder.
2. Setting the Current Time
Before setting feeding schedules, ensure the current time is accurately set on the device. Consult the on-screen menu for time adjustment options.
3. Programming Feeding Schedules
The unit allows for multiple daily feeding times and customizable portion sizes.
- Access the 'Meal Settings' or 'Feed Plan' menu on the display.
- Select a meal number (e.g., Meal 1, Meal 2).
- Set the desired feeding time for that meal.
- Adjust the portion size (number of units/servings) for that meal.
- Repeat for additional meals as needed.
- Save your settings.
4. Manual Feeding
To dispense food immediately outside of scheduled times, use the manual feed button or option on the control panel. This will dispense one portion of food.
5. Water Dispensing
The water dispenser operates by gravity, continuously refilling the water tray as your pet drinks. Ensure the water reservoir is always adequately filled.
Maintenance
1. Cleaning the Unit
Regular cleaning is essential for hygiene and proper functioning.
- Food Container and Tray: Detach the food container and tray. Wash them with mild soap and water. Rinse thoroughly and dry completely before reassembling.
- Water Reservoir and Tray: Detach the water reservoir and tray. Wash them with mild soap and water. Rinse thoroughly. For the water reservoir, ensure no soap residue remains. Dry completely before refilling and reassembling.
- Main Unit: Wipe the exterior of the main unit with a damp cloth. Do not immerse the main unit in water.
2. General Care
- Avoid placing the unit in direct sunlight or near heat sources.
- Use only dry pet food in the food dispenser.
- Regularly check food and water levels.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Food not dispensing | Food container empty; Food jammed; Dispenser outlet blocked; Incorrect schedule settings. | Refill food container; Clear any food blockages; Check and adjust feeding schedule. |
| Water not flowing to tray | Water reservoir empty; Reservoir not seated correctly; Water tray blocked. | Refill water reservoir; Re-seat reservoir firmly; Clear any blockages in the water tray. |
| Unit not powering on | Power adapter not connected; Power outlet faulty. | Ensure power adapter is securely connected; Try a different power outlet. |
| Display not working | Power issue; Device malfunction. | Check power connection; If problem persists, contact customer support. |
Specifications
- Model Number: PTM-30A3
- Food Capacity: 5 Liters
- Water Capacity: 3.5 Liters
- Product Dimensions: 16.4 x 33.1 x 57.4 cm
- Item Weight: 2.72 kg
- Material: Acrylonitrile Butadiene Styrene, Plastic
- Target Species: Cat
- Special Features: Automatic Feeding, Dual Function, Large Capacity, Timed Feeding, Water Dispenser
- Manufacturer: Shenzhen Ipetmon Creative Technology Co., Ltd.
Image: The ROJECO PTM-30A3 unit positioned on a wooden floor against a light wall, demonstrating its compact design in a typical home setting.
Support
For further assistance, troubleshooting not covered in this manual, or warranty inquiries, please contact ROJECO customer support through the retailer's platform or the official ROJECO website.
