FAVSH Upholstered Daybed with Drawers
FAVSH Full Size Upholstered Daybed with Two Storage Drawers User Manual
Model: Upholstered Daybed with Drawers | Brand: FAVSH
1. Introduction
Thank you for choosing the FAVSH Full Size Upholstered Daybed with Two Storage Drawers. This manual provides essential information for the safe assembly, operation, and maintenance of your new daybed. Please read all instructions carefully before beginning assembly and retain this manual for future reference.
This upholstered daybed is designed to offer both comfort and functionality, serving as a stylish sofa during the day and a comfortable bed at night. It features a button-tufted backrest, waved shape arms with piping, and two integrated storage drawers to help maximize space in your bedroom, guest room, or living area.
2. Safety Information
WARNING: Failure to follow these warnings could result in serious injury.
- Assembly: Adult assembly is required. Ensure all parts are present and undamaged before assembly. Do not use power tools for assembly as this may overtighten fasteners and damage the frame.
- Weight Limit: This daybed is designed to support a maximum weight of 500 pounds. Exceeding this limit may compromise the structural integrity and lead to injury.
- Stability: Ensure the daybed is placed on a flat, level surface. Do not allow children to jump on the daybed.
- Moving the Daybed: When moving the daybed, lift it rather than dragging it to prevent damage to the frame and flooring.
- Small Parts: Keep all small parts and packaging materials away from children during assembly to prevent choking hazards.
- Maintenance: Regularly check all bolts and fasteners to ensure they are tight. Retighten as necessary.
3. Package Contents
Before assembly, please verify that all components listed below are present and undamaged. If any parts are missing or damaged, please contact customer support.
Parts List
- Headboard/Backrest Panel (1)
- Side Panels/Arms (2)
- Front Rail (1)
- Bed Slats (Multiple)
- Center Support Legs (Multiple)
- Storage Drawer Frames (2)
- Drawer Bottom Panels (2)
- Drawer Front Panels (2)
- Drawer Wheels (Multiple)
Hardware List
- Bolts (Various sizes)
- Washers
- Nuts
- Allen Wrench
- Screws
4. Setup and Assembly
Assembly typically requires two adults and takes approximately 1-2 hours. Follow the steps below carefully. Do not fully tighten bolts until instructed.
- Prepare the Area: Clear a spacious area for assembly. Lay out all parts and hardware on a soft, clean surface to prevent scratches.
- Assemble the Main Frame: Attach the side panels (arms) to the backrest panel using the provided bolts and washers. Ensure the curved arms are correctly oriented.
- Attach the Front Rail: Connect the front rail to the side panels. At this stage, the main frame of the daybed should begin to take shape.
- Install Center Support Legs: Secure the center support legs to the designated points on the frame. These provide crucial stability for the mattress.
- Place Bed Slats: Carefully lay the wooden bed slats across the frame. Ensure they are evenly spaced and secured according to the instructions. This forms the mattress support.
- Assemble Storage Drawers: For each drawer, assemble the frame, attach the bottom panel, and then secure the drawer front. Install the wheels on the bottom of each drawer.
- Insert Drawers: Slide the assembled storage drawers under the daybed frame. The wheels allow for easy movement.
- Final Tightening: Once all components are in place and aligned, go back and securely tighten all bolts and fasteners. Do not overtighten.



5. Operating Instructions
Using as a Daybed/Sofa
The FAVSH Upholstered Daybed is designed to function as a comfortable sofa during the day. Simply place decorative pillows against the backrest to create a cozy seating area. The full-size mattress (not included) provides ample space for lounging.
Using as a Bed
To use the daybed as a sleeping surface, ensure a full-size mattress is placed securely on the slats. No box spring is required. The sturdy wooden slats provide adequate support for a mattress.
Utilizing Storage Drawers
The two integrated storage drawers are located beneath the daybed frame. To access them, simply pull the drawer fronts outwards. The drawers are equipped with wheels for smooth operation on most floor surfaces. To close, gently push the drawers back into place until they are flush with the daybed frame.


6. Maintenance and Care
Cleaning the Upholstery
The daybed is upholstered in linen fabric. To clean, wipe with a dry cloth. For spills, blot immediately with a clean, dry cloth. Avoid using harsh chemicals or abrasive cleaners, which may damage the fabric. For stubborn stains, a mild fabric cleaner designed for upholstery may be used, following the product's instructions and testing on an inconspicuous area first.
Frame Care
Regularly check all bolts and fasteners to ensure they remain tight. Over time, normal use can cause them to loosen. Retighten as necessary to maintain the daybed's stability and structural integrity. Avoid exposing the daybed to excessive moisture or direct sunlight, which can cause fading or damage to the wood and fabric.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Daybed feels wobbly or unstable. | Loose bolts or uneven floor surface. | Ensure all assembly bolts are securely tightened. Check if the daybed is on a level surface; use furniture pads if necessary to stabilize. |
| Bed slats seem flimsy or make noise. | Slats not properly secured or unevenly distributed weight. | Verify that all slats are correctly placed and secured to the frame. Ensure weight is distributed evenly on the mattress. Avoid jumping on the bed. |
| Storage drawers do not slide smoothly. | Obstruction, damaged wheels, or uneven floor. | Check for any objects obstructing the drawer path. Inspect drawer wheels for damage. Ensure the floor surface is clear and level. |
| Parts do not align during assembly. | Incorrect orientation of parts or bolts not fully loosened. | Review the assembly instructions carefully, paying attention to part orientation. Loosen all bolts slightly before attempting to align parts, then tighten once aligned. |
8. Specifications
| Feature | Detail |
|---|---|
| Size | Full |
| Color | Dark Grey |
| Product Dimensions (L x W x H) | 81.5"L x 57.85"W x 25.6"H |
| Upholstery Fabric Type | Linen |
| Weight Limit | 500 Pounds |
| Item Weight | 94 Pounds |
| Special Features | Easy Assembly Required, Upholstered, No Box Spring Required |
| Included Components | Drawer |
| Frame Size | Full Size with Storage Drawers |
| Manufacturer | FAVSH |
| Model Number | Upholstered Daybed with Drawers |

9. Warranty and Support
Warranty Information
This FAVSH Upholstered Daybed comes with a Limited Warranty. Please refer to the warranty documentation included with your purchase for specific terms, conditions, and duration. The warranty typically covers manufacturing defects under normal use.
Customer Support
For any questions, missing parts, or assistance with assembly or troubleshooting, please contact FAVSH customer support. You can typically find contact information on the packaging, the seller's website, or through your purchase platform.
When contacting support, please have your product model number (Upholstered Daybed with Drawers) and purchase details readily available to expedite assistance.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.