HEYVALUE Bottle Warmer Model B0DYP3MTNW User Manual

1. Introduction

Thank you for choosing the HEYVALUE Bottle Warmer. This device is designed to simplify your baby feeding routine with its versatile 10-in-1 functions, including fast warming, gentle thawing, steaming, and food heating. Please read this manual thoroughly before first use to ensure safe and optimal operation.

Figure 1: HEYVALUE Bottle Warmer Front View

2. Safety Information

Always adhere to the following safety precautions to prevent injury or damage to the product:

• Do not immerse the main unit in water or other liquids.
• Ensure the appliance is placed on a stable, heat-resistant surface, away from children.
• Always check the milk or food temperature before feeding your baby.
• Unplug the appliance when not in use and before cleaning.
• Do not operate the appliance if the cord or plug is damaged.
• Use only distilled water for optimal performance and to prevent mineral buildup.
• Keep out of reach of children. This appliance is not a toy.
• The anti-scald basket should always be used when removing bottles or food jars.

3. Product Overview

The HEYVALUE Bottle Warmer features an intuitive IMD LED display and multiple function buttons for ease of use.

3.1 Components

• Main Unit with Heating Chamber
• IMD LED Display
• Control Buttons (24H, FOOD, THAW, FAST, Sterilize, Power, Temperature/Time Adjustment)
• Anti-scald Basket

Figure 2: Overview of Functions

4. Setup

1. Unpacking: Carefully remove all components from the packaging. Retain packaging for future storage or transport.
2. Initial Cleaning: Before first use, clean the anti-scald basket and the interior of the heating chamber with warm, soapy water. Rinse thoroughly and wipe dry. Do not immerse the main unit.
3. Placement: Place the bottle warmer on a flat, stable, and dry surface, away from direct sunlight or heat sources.
4. Power Connection: Plug the power cord into a suitable electrical outlet. The LED display will illuminate briefly.

5. Operating Instructions

The HEYVALUE Bottle Warmer offers multiple functions for various feeding needs.

5.1 Adding Water

For all warming and steaming functions, add an appropriate amount of distilled water to the heating chamber. The water level should be sufficient to cover the milk level in the bottle or the food jar, but not exceed the maximum fill line.

5.2 Fast Warming

This mode quickly heats cold milk to the desired temperature, typically within 2-6 minutes.

1. Place the bottle with milk into the anti-scald basket, then lower it into the heating chamber.
2. Add water to the heating chamber as described in Section 5.1.
3. Press the FAST button. The default temperature and time will display.
4. Use the + and - buttons to adjust the target temperature and warming time if needed.
5. The device will start warming. A "beep" will sound when the cycle is complete, and the device will automatically power off or switch to Keep Warm mode if selected.
6. Carefully remove the bottle using the anti-scald basket. Always test the milk temperature before feeding.

Figure 3: Fast Warming Function

5.3 Gentle Thaw / Fast Thaw

These modes are designed to safely thaw frozen breastmilk or formula, preserving nutrients.

1. Place the frozen milk bag or bottle into the anti-scald basket and into the heating chamber.
2. Add water to the heating chamber.
3. Press the THAW button. Select either Gentle Thaw or Fast Thaw using the + and - buttons if there are sub-options.
4. Adjust the thawing time if necessary.
5. The device will begin thawing. A "beep" will indicate completion.
6. Remove the milk and check its temperature.

Figure 4: Gentle Thawing for Breastmilk

5.4 Keep Warm (24H Thermostat System)

This function maintains milk or water at a constant temperature for up to 24 hours.

1. Place the bottle with milk or water into the anti-scald basket and into the heating chamber.
2. Add water to the heating chamber.
3. Press the 24H button.
4. Use the + and - buttons to set the desired holding temperature.
5. The device will heat to and maintain the set temperature for 24 hours.
6. At night, you can preset the feeding time. The LED display will show the constant temperature.

Figure 5: 24-Hour Keep Warm Function

5.5 Steaming (Sterilization)

This function uses high-temperature steam to sterilize bottles, pacifiers, and other small baby items.

1. Place the items to be sterilized into the anti-scald basket and into the heating chamber.
2. Add a small amount of water (e.g., 50-100ml) to the heating chamber.
3. Press the Sterilize button.
4. The device will generate high-temperature steam for 5-10 minutes. A "beep" will sound upon completion.
5. Carefully remove the sterilized items using the anti-scald basket. Be aware of hot steam and hot surfaces.

Figure 6: Steaming/Sterilization Function

5.6 Food Heating

This mode is suitable for warming baby food jars.

1. Place the baby food jar into the anti-scald basket and into the heating chamber.
2. Add water to the heating chamber.
3. Press the FOOD button.
4. Adjust the heating time and temperature as needed using the + and - buttons.
5. The device will heat the food. A "beep" will sound when complete.
6. Carefully remove the food jar and stir the food to ensure even heating. Always test the temperature before feeding.

6. Maintenance

Regular cleaning and descaling will ensure the longevity and efficiency of your HEYVALUE Bottle Warmer.

6.1 Cleaning

1. Always unplug the appliance and allow it to cool completely before cleaning.
2. Empty any remaining water from the heating chamber.
3. Wipe the exterior of the main unit with a damp cloth. Do not use abrasive cleaners.
4. Wash the anti-scald basket with warm, soapy water and rinse thoroughly.
5. For the interior of the heating chamber, use a soft brush or sponge with warm, soapy water. Rinse by wiping with a damp cloth.
6. Ensure all parts are dry before storing or next use.

6.2 Descaling

Mineral deposits (limescale) can build up over time, especially with hard water. Descale regularly (e.g., once a month or as needed).

1. Mix 50ml of white vinegar with 100ml of cold water.
2. Pour the mixture into the heating chamber.
3. Allow the mixture to soak for 30 minutes to 1 hour (or longer for heavy buildup). Do not turn on the appliance during this time.
4. Pour out the mixture and rinse the heating chamber thoroughly with clean water several times.
5. Wipe dry.

7. Troubleshooting

8. Specifications

• Model: B0DYP3MTNW
• Material Composition: Food-grade PP Material
• Package Dimensions: 6.57 x 5.39 x 5.39 inches
• Item Weight: 1.32 pounds
• Batteries Required: No

9. Customer Support

For any questions, concerns, or technical assistance, please contact HEYVALUE customer support. Refer to your purchase documentation or the HEYVALUE official website for contact details.

Return Policy: This product is subject to a 90-day return policy for refund or replacement, as per the retailer's terms.