1. Introduction
The MOZA R9 V3 Direct Drive Wheel Base is a high-performance sim racing component designed to deliver an immersive and realistic force feedback experience. Engineered with a 9 Nm direct-drive servo motor and aviation-grade aluminum alloy, it provides precise and detailed steering forces, mimicking real-world driving conditions. This manual provides essential information for setup, operation, maintenance, and troubleshooting to ensure optimal performance and longevity of your device.
Image 1.1: The MOZA R9 V3 Direct Drive Wheel Base, showcasing its compact design, direct drive servo motor, aviation-grade aluminum alloy housing, 21-bit magnetic encoder, 360Hz iRacing mode support, and smart temperature control system.
2. What's in the Box
Carefully unpack all components and verify the contents against the list below. If any items are missing or damaged, please contact MOZA support.
- MOZA R9 V3 Wheel Base x 1
- Power Adapter x 1
- Power Cable x 1
- USB Cable x 1
- MOZA Stickers x 1
- Toolkit x 1
- Portable Cloth Bag x 1
3. Setup Guide
Follow these steps to set up your MOZA R9 V3 Wheel Base for optimal performance.
3.1 Mounting the Wheel Base
The MOZA R9 V3 can be mounted to a sim racing rig or a desk using the included mounting hardware. Ensure the mounting surface is stable and secure to prevent movement during use.
Image 3.1: The MOZA R9 V3 Wheel Base securely mounted to a sim racing cockpit, demonstrating a typical installation scenario.
3.2 Connecting Peripherals
- Power Connection: Connect the power adapter to the wheel base and then to a power outlet.
- USB Connection: Connect the USB cable from the wheel base to your PC.
- Steering Wheel Attachment: Attach your MOZA compatible steering wheel to the wheel base using the quick-release mechanism. Ensure it clicks securely into place.
Image 3.2: A user demonstrating the quick and easy attachment of a MOZA steering wheel to the R9 V3 Wheel Base.
3.3 Software Installation (MOZA Pit House)
Download and install the MOZA Pit House software from the official MOZA Racing website. This software is essential for configuring your wheel base, updating firmware, and customizing force feedback settings.
- Visit the official MOZA Racing website.
- Navigate to the 'Support' or 'Downloads' section.
- Download the latest version of MOZA Pit House.
- Follow the on-screen instructions to complete the installation.
4. Operating Instructions
Once the hardware is set up and the software is installed, you can begin operating your MOZA R9 V3 Wheel Base.
4.1 Powering On/Off
To power on the wheel base, ensure all connections are secure and press the power button located on the unit. To power off, press and hold the power button until the unit shuts down.
4.2 Using MOZA Pit House
MOZA Pit House is your central control panel for the R9 V3 Wheel Base. It allows for extensive customization and monitoring.
- Device Status: Monitor the connection status and firmware versions of your MOZA devices.
- Basic Settings: Adjust general parameters such as maximum steering angle, game force feedback intensity, and wheel spring/damper strength.
Image 4.1: The 'Basic Settings' tab within MOZA Pit House, allowing users to fine-tune steering angle, force feedback intensity, and other fundamental wheel base parameters.
- FFB Effect Equalizer: Customize the force feedback effects to your preference, adjusting the intensity of various road and car handling characteristics.
Image 4.2: The 'FFB Effect Equalizer' in MOZA Pit House, providing granular control over different force feedback effects for a personalized driving feel.
- Firmware Updates: Regularly check for and install firmware updates to ensure your device has the latest features and performance improvements.
Image 4.3: The firmware update section in MOZA Pit House, where users can check for and apply the latest software versions for their MOZA devices.
4.3 Mobile APP Control
The MOZA APP allows for convenient control and modification of settings directly from your mobile device, offering cloud control capabilities.
Image 4.4: The MOZA mobile application interface, enabling remote control and setting adjustments for your MOZA racing equipment.
5. Maintenance
Proper maintenance ensures the longevity and consistent performance of your MOZA R9 V3 Wheel Base.
- Cleaning: Use a soft, dry cloth to wipe down the exterior of the wheel base. Avoid using abrasive cleaners or solvents.
- Ventilation: Ensure the ventilation openings are clear of dust and obstructions to allow for proper airflow and temperature control. The Smart Temperature Control System helps manage internal temperatures.
- Storage: When not in use for extended periods, store the wheel base in a cool, dry place, away from direct sunlight and extreme temperatures.
6. Troubleshooting
This section addresses common issues you might encounter with your MOZA R9 V3 Wheel Base.
| Problem | Possible Cause | Solution |
|---|---|---|
| No Force Feedback | Software not running, FFB strength too low, game settings. | Ensure MOZA Pit House is running. Check FFB intensity in Pit House and in-game settings. Restart game/PC. |
| Wheel Base Not Detected by PC | USB cable issue, driver issue, power issue. | Try a different USB port or cable. Reinstall MOZA Pit House drivers. Ensure power adapter is connected and unit is powered on. |
| Overheating | Poor ventilation, prolonged high-intensity use. | Ensure adequate ventilation around the unit. Reduce FFB intensity or take a break to allow cooling. The Smart Temperature Control System will manage this automatically. |
| Steering Wheel Not Responding | Improper attachment, wireless communication issue. | Re-attach the steering wheel, ensuring it's fully seated. Check for wireless connection status in MOZA Pit House. |
For further assistance, please refer to the official MOZA Racing support resources or contact customer service.
7. Specifications
Key technical specifications for the MOZA R9 V3 Direct Drive Wheel Base:
- Model Number: AZRS080
- Peak Torque: 9 Nm
- Drive Type: Direct Drive Servo Motor
- Encoder Resolution: 21-bit Magnetic Encoder (2.09 million resolution)
- Construction Material: Aviation-Grade Aluminum Alloy
- Dimensions: Approximately 11.7 x 11 x 7.2 inches
- Weight: 14.55 pounds
- Connectivity: USB, Wireless (for steering wheel communication)
- Control System: Smart Temperature Control System
- Processor: Quad Core Architecture CPUs
8. Compatibility
The MOZA R9 V3 Wheel Base is designed for broad compatibility with various MOZA peripherals and PC racing titles.
8.1 MOZA Gears Compatibility
The R9 V3 Wheel Base is fully compatible with the MOZA ecosystem, including:
- KS Steering Wheel
- ES Steering Wheel
- CS V2
- RS V2
- GS Alcantara V2
- GS Microfiber Leather V2
- SRP Pedals
- CRP Pedals
Image 8.1: An illustration of the MOZA ecosystem, highlighting the R9 V3 Wheel Base's compatibility with various MOZA steering wheels, pedals, and other accessories.
8.2 Platform and Game Compatibility
The MOZA R9 V3 Wheel Base is compatible with PC. It supports a wide range of popular PC racing games:
Image 8.2: A comprehensive list of PC games officially supported by the MOZA R9 V3 Wheel Base, ensuring a wide range of racing experiences.
- Assetto Corsa
- Assetto Corsa Competizione
- Dirt Rally
- Dirt Rally 2.0
- Dirt 4
- F1 2018, F1 2019, F1 2020, F1 2021, F1 2022
- Project CARS 1, Project CARS 2, Project CARS 3
- iRacing
- Forza Horizon 4 (Note: This game is currently not compatible with Steam)
- Forza Horizon 5 (Win 10)
- Live For Speed
- Automobilista
- Automobilista 2
- rFactor2
- Euro Truck Simulator 2
- American Truck Simulator
- KartKraft
- WRC 9 / WRC 10
- BeamNG.Drive
- Mudrunner
- Wreckfest
- RaceRoom Racing Experience
- CarX Drift Racing Online
9. Warranty and Support
MOZA products come with a limited warranty. Please refer to the official MOZA Racing website for detailed warranty terms and conditions specific to your region. For technical support, driver downloads, and FAQs, visit the MOZA Racing support page or contact their customer service team directly.
Official MOZA Racing Website: mozaracing.com
