1. Product Overview
The LIGE Men's Quartz Chronograph Watch (Model LG89107) is a sophisticated timepiece designed for precision and durability. It features a reliable Japanese quartz movement, a multi-functional dial with chronograph capabilities, date display, and a unique lunar phase indicator. The watch is built with a robust stainless steel case, a scratch-resistant mineral crystal lens, and a comfortable genuine leather strap. Luminous hands ensure readability in low-light conditions.
Image 1.1: Front view of the LIGE Men's Quartz Chronograph Watch with a blue dial and leather strap.
Image 1.2: Key features of the watch, including 30M water resistance, high hardness mineral glass, luminous hands, and a durable leather strap.
2. Setup
Before initial use, ensure the watch crown is fully pushed in. If the watch is not running, it may require winding or a new battery. This watch is powered by a quartz movement and does not require manual winding.
Image 2.1: Diagram illustrating the functions of the watch crown and pushers.
2.1 Setting the Time
- Pull the crown (middle knob) out to position 2 (farthest out).
- Rotate the crown clockwise or counter-clockwise to set the hour and minute hands to the correct time. Note that the 24-hour sub-dial and lunar phase will advance with the main time.
- Once the time is set, push the crown back in to position 0 (fully in) to start the watch movement.
2.2 Setting the Date
- Pull the crown (middle knob) out to position 1 (first click).
- Rotate the crown to adjust the date. Avoid setting the date between 9 PM and 3 AM, as this may interfere with the automatic date change mechanism.
- Once the date is set, push the crown back in to position 0 (fully in).
2.3 Adjusting Lunar Phase / 24-Hour Display
The lunar phase and 24-hour display are synchronized with the main time setting. As you set the main time, the 24-hour sub-dial will indicate AM/PM, and the lunar phase will advance accordingly. There is no independent adjustment for this sub-dial.
3. Operating the Chronograph
The chronograph function allows for precise timing of events.
3.1 Starting and Stopping the Chronograph
- Press the top pusher button (located at 2 o'clock) to start the chronograph. The chronograph seconds hand will begin to move.
- Press the top pusher button again to pause the chronograph. The hands will stop, showing the elapsed time.
- Press the top pusher button once more to resume timing from where it left off.
3.2 Resetting the Chronograph
- Ensure the chronograph is stopped (not running).
- Press the bottom pusher button (located at 4 o'clock) to reset the chronograph. All chronograph hands will return to their zero positions.
3.3 Luminous Display
The watch hands and hour markers are coated with a luminous material. For optimal glow in the dark, expose the watch to a bright light source (natural or artificial) for a few minutes before entering a dark environment.
4. Maintenance
4.1 Water Resistance
This watch is water-resistant up to 3 ATM (30 meters). This rating means the watch is suitable for daily use and can withstand splashes, rain, and brief immersion in water. It is not suitable for showering, swimming, diving, or any water sports. Always ensure the crown is fully pushed in before any contact with water.
4.2 Cleaning
To clean the watch, wipe the case and crystal with a soft, dry, lint-free cloth. For the leather strap, use a slightly damp cloth and allow it to air dry. Avoid using harsh chemicals or abrasive materials.
4.3 Battery Replacement
The watch is powered by a nonstandard battery. When the battery runs low, the watch may stop or lose accuracy. Battery replacement should be performed by a qualified watch technician to ensure proper sealing and maintain water resistance.
4.4 Strap Care
The genuine leather strap is durable but can be affected by moisture, sweat, and direct sunlight. To prolong its life, avoid prolonged exposure to water and extreme temperatures. Clean and condition the leather periodically with appropriate leather care products.
5. Troubleshooting
- Watch Not Running: Check if the crown is fully pushed in. If it is, the battery may need replacement.
- Incorrect Time/Date: Refer to Section 2 (Setup) for instructions on how to correctly set the time and date. Ensure the crown is fully pushed in after setting.
- Chronograph Not Resetting to Zero: If the chronograph hands do not return to their zero positions after pressing the reset button, the watch may require professional adjustment.
- Fogging Under Crystal: If condensation appears under the crystal, it indicates a loss of water resistance. Avoid further contact with water and seek professional service immediately.
6. Specifications
| Feature | Specification |
|---|---|
| Model Number | LG89107 |
| Movement Type | Japanese Quartz |
| Water Resistance | 3 ATM (30 meters) |
| Case Material | Stainless Steel |
| Strap Material | Genuine Leather |
| Lens Material | Mineral Crystal (500-600 HV Vickers hardness) |
| Functions | Time (Hour, Minute, Second), Chronograph, Date, 24-Hour Display, Lunar Phase, Luminous Hands |
| Battery Type | 1 Nonstandard Battery (included) |
| Approx. Package Dimensions | 6.14 x 3.78 x 0.94 inches |
| Approx. Package Weight | 2.29 ounces |
7. Warranty and Support
LIGE provides a 2-year customer service policy for this watch, covering manufacturing defects. Additionally, a 60-day return/exchange policy is available from the date of purchase. For any questions, assistance, or warranty claims, please contact LIGE customer support. Our dedicated support team is ready to provide professional assistance.
Please retain your proof of purchase for warranty validation.
