Tribesigns Kitchen Table with Bench

Download PDFFree PDF. The Save button below keeps a bookmark and private notes in your account.

Tribesigns 47-inch Small Dining Table Set User Manual

Model: Kitchen Table with Bench

1. Introduction

Thank you for choosing the Tribesigns 47-inch Small Dining Table Set. This manual provides essential information for the safe assembly, proper use, and maintenance of your new 3-piece dining furniture. Please read these instructions carefully before assembly and retain them for future reference.

2. Safety Information

WARNING:

  • Proper assembly is required to ensure stability. Follow all assembly steps precisely.
  • Do not exceed the weight limit of 330 lbs (150 kg) for the table and 450 lbs (204 kg) for each bench. Overloading can cause damage or injury.
  • Secure the table to the floor if there is any risk of tipping, especially in households with children or pets.
  • Keep small parts and packaging materials away from children during assembly to prevent choking hazards.
  • Regularly check all fasteners to ensure they remain tight. Loose fasteners can compromise stability.

3. Package Contents

Before beginning assembly, verify that all components are present and undamaged. If any parts are missing or damaged, please contact customer support.

  • 1 x Dining Table
  • 2 x Dining Benches
  • 1 x Hardware Pack (screws, bolts, tools)
  • 1 x Detailed Installation Manual (separate document)

4. Setup and Assembly

Assembly is designed to be straightforward and can typically be completed in under 45 minutes. It is recommended to assemble the furniture on a soft, clean surface to prevent scratches.

General Assembly Steps:

  1. Unpack Components: Carefully remove all parts from the packaging and lay them out. Identify each part using the included installation manual.
  2. Assemble Table Frame: Attach the table legs to the tabletop using the provided hardware. Ensure all connections are secure but do not fully tighten until the table is upright.
  3. Assemble Bench Frames: Attach the bench legs to the bench seats using the provided hardware.
  4. Final Tightening: Once the table and benches are assembled and upright, carefully tighten all screws and bolts. Do not overtighten.
  5. Adjust Foot Pads: The furniture features adjustable foot pads to prevent scratches on floors and ensure stability on uneven surfaces. Adjust as needed.
Image showing the spacious surface and stability frame of the dining table.

Figure 4.1: Illustration highlighting the spacious surface and the robust stability frame of the dining table, featuring thickened metal tubes for enhanced support.

Close-up of solid reinforcement brackets on the table legs.

Figure 4.2: Detail of the solid reinforcement brackets integrated into the table's structure, providing additional stability.

Close-up of adjustable foot pads on the furniture legs.

Figure 4.3: View of the adjustable foot pads, designed to protect floors and ensure level positioning.

5. Operating and Usage

This 3-piece dining set is designed for versatility and comfort in various settings.

  • Seating Capacity: The set comfortably seats 2-3 people for dining.
  • Versatile Use: Beyond dining, the table and benches can serve as a computer desk, study area, or workstation, making it suitable for small apartments, kitchens, dining rooms, or cafes.
  • Weight Limits: Adhere to the maximum weight capacities: Table: 330 lbs (150 kg); Each Bench: 450 lbs (204 kg).
Dining table set comfortably seating 4-6 people.

Figure 5.1: The dining set arranged to accommodate 4-6 people, demonstrating its capacity for family-style dining.

6. Maintenance

To ensure the longevity and appearance of your dining set, follow these simple maintenance guidelines:

  • Cleaning: Wipe the surfaces with a damp cloth. Avoid harsh chemicals or abrasive cleaners, which can damage the finish.
  • Spills: The splash-proof treated surface is waterproof and scratch-resistant. Promptly wipe up any spills to prevent staining.
  • Protection: While durable, using placemats or coasters can further protect the tabletop from heat, scratches, and moisture.
  • Inspection: Periodically check all bolts and screws and tighten them if necessary to maintain structural integrity.
Close-up of the smooth, water-resistant surface of the table.

Figure 6.1: The smooth, treated surface of the table demonstrating its water-resistant properties, making cleaning easier.

7. Troubleshooting

If you encounter any issues with your dining set, refer to the following common problems and solutions:

  • Instability/Wobbling:
    Solution: Ensure all bolts and screws are fully tightened. Adjust the foot pads on the bottom of the legs to compensate for uneven flooring.
  • Missing Parts:
    Solution: Double-check the packaging. If parts are genuinely missing, contact Tribesigns customer support with your purchase details.
  • Difficulty Assembling:
    Solution: Review the detailed installation manual provided with the product. Ensure you are using the correct hardware for each step. Do not force parts together.
  • Surface Damage (Scratches/Stains):
    Solution: For minor scratches, furniture repair kits may be used. For stains, clean immediately with a damp cloth. Persistent stains may require specialized wood cleaner, used sparingly.

8. Specifications

Detailed specifications for the Tribesigns 47-inch Small Dining Table Set:

Diagram showing detailed dimensions and specifications of the dining table and benches.

Figure 8.1: Visual representation of the dining set's dimensions and key specifications.

FeatureDetail
Model NumberKitchen Table with Bench
ColorWhite & Brown
MaterialMDF Board, Metal Frame (Engineered Wood)
Table Dimensions (L x W x H)47.24" x 27.55" x 29.92" (120 cm x 70 cm x 76 cm)
Bench Dimensions (L x W x H)47.24" x 13.8" x 18.2" (120 cm x 35 cm x 46.2 cm)
Table Weight Capacity330 lbs (150 kg)
Bench Weight Capacity450 lbs (204 kg) per bench
Item Weight95 lbs (43 kg)
Product Care InstructionsWipe with Damp Cloth

9. Warranty

Tribesigns products are manufactured with quality and durability in mind. For specific warranty information regarding your dining table set, please refer to the warranty card included in your package or visit the official Tribesigns website. Please retain your proof of purchase for any warranty claims.

10. Customer Support

If you have any questions, require assistance with assembly, or need to report missing/damaged parts, please contact Tribesigns customer support. Contact information can typically be found on the product packaging, the included installation manual, or the official Tribesigns website.

Please have your product model number (Kitchen Table with Bench) and purchase details ready when contacting support.

© 2025 Tribesigns. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.