1. Introduction
Thank you for choosing the VEVOR Universal Forklift Seat. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your new seat. Please read these instructions thoroughly before use and retain them for future reference.
Image 1: Front view of the VEVOR Universal Forklift Seat.
2. Product Features
- Flexible Slot Adjustment: Features adjustable mounting holes (6.3 to 13.4 inches) for compatibility with various forklift and heavy-duty vehicle models.
- Ergonomic Design: Wraparound seat contours to the body, providing exceptional comfort and lower back support for long hours of operation.
- Seat Angle Adjustment: Backrest adjusts between 70° to 110° to allow drivers to find their most comfortable position, reducing strain.
- Enhanced Security: Equipped with a gravity-sensing micro-switch to ensure vehicle operation only when the driver is seated, and an emergency locking seatbelt for injury protection.
- Durable Construction: Crafted from PVC leather and high-resilience polyurethane foam for durability, ease of maintenance, and superior comfort.
Image 2: The ergonomic design of the seat provides comprehensive support.
3. Package Contents
Please verify that all components are present upon unpacking:
- 1 x VEVOR Universal Forklift Seat
- Mounting Hardware (bolts, washers, etc.)
- Instruction Manual (this document)
4. Setup and Installation
Follow these steps to properly install your VEVOR Universal Forklift Seat. Ensure the vehicle is turned off and secured before beginning installation.
4.1. Mounting Hole Adjustment
The seat features adjustable mounting slots to fit various vehicle types. Adjust the slide rails to match your vehicle's existing bolt pattern, which ranges from 6.3 to 13.4 inches.
Image 3: Adjustable mounting slots for universal compatibility.
4.2. Attaching the Seat
- Position the seat onto the vehicle's mounting platform, aligning the adjusted slots with the vehicle's bolt holes.
- Secure the seat using the provided mounting hardware. Ensure all bolts are tightened securely to prevent movement during operation.
- Connect the wiring for the gravity-sensing micro-switch, if applicable, following your vehicle's specific wiring instructions.
Video 1: Installation overview of the VEVOR Universal Forklift Seat. This video demonstrates the assembly and mounting process.
Video 2: Detailed assembly of the seat components, including armrests and seatbelt.
5. Operating Instructions
5.1. Backrest Angle Adjustment
To adjust the backrest angle, locate the adjustment lever on the side of the seat. Pull the lever and recline or incline the backrest to your desired position (70° to 110°). Release the lever to lock the position.
Image 4: Adjust the backrest for optimal comfort and posture.
5.2. Seatbelt Usage
Always wear the seatbelt during vehicle operation. Insert the seatbelt tongue into the buckle until it clicks. To release, press the red button on the buckle.
Image 5: The two-point seatbelt provides essential driver safety.
5.3. Gravity-Sensing Micro-Switch
The integrated micro-switch ensures the vehicle operates only when a driver is properly seated. This is a critical safety feature. Do not attempt to bypass or tamper with this switch.
Video 3: Demonstration of the micro-switch functionality for enhanced safety.
6. Maintenance
6.1. Cleaning
The PVC leather material is easy to clean. Use a damp cloth with mild soap and water to wipe down the seat. Avoid harsh chemicals or abrasive cleaners that could damage the material.
Image 6: High-quality PVC and polyurethane foam ensure durability and easy cleaning.
6.2. Inspection
Regularly inspect the seat for any signs of wear, damage, or loose components. Pay close attention to the seatbelt, adjustment mechanisms, and mounting hardware. Replace any damaged parts immediately.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Seat is loose after installation. | Mounting bolts are not sufficiently tightened. | Re-tighten all mounting bolts securely. |
| Backrest adjustment is stiff or not locking. | Mechanism may be obstructed or require lubrication. | Check for obstructions. Apply a silicone-based lubricant to the mechanism if needed. |
| Vehicle not starting when seated. | Gravity-sensing micro-switch not engaged or faulty wiring. | Ensure proper seating. Check micro-switch wiring connections. Consult a qualified technician if issues persist. |
8. Specifications
| Feature | Detail |
|---|---|
| Model Number | TY-B28-1 |
| Brand | VEVOR |
| Material | PVC, Polyurethane Foam |
| Compatible Installation Slot Size | 160-340 mm / 6.3-13.3 inches |
| Backrest Adjustable Angle | 70°-110° |
| Front-to-Back Adjustable Size | 180 mm / 7 inches |
| Product Dimensions | 570 x 560 x 550 mm / 22.4 x 22 x 21.7 inches |
| Item Weight | 32.4 pounds |
| Safety Switch | Copper Sheet Electric Lock (Gravity-sensing micro-switch) |
| Vehicle Service Type | Forklift, Tractor, Skid Loader, Excavator, Dozer, Backhoe, Telehandler, UTV, ATV |
Image 7: Key dimensions and features of the seat.
9. Warranty and Support
For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official VEVOR website. Keep your purchase receipt as proof of purchase.
