VEVOR Forklift Seats User Manual

IMPORTANT SAFEGUARDS

Read and understand this entire manual before assembling, installing, operating, or servicing this product. Failure to follow these warnings and instructions can cause death, personal injury or damage to valuable property.

1. While assembling and using this product, keep work area clean and well-lighted, and keep spectators and children out of the work area.
2. Assemble only according to the seat parameter. Improper assembly will cause hazards.
3. Use as intended only.
4. Keep anyone not wearing the appropriate safety equipment away from the work area.
5. Flammable: Keep away from open flame. This product will ignite and burn if brought into contact with an open flame.
6. Keep away from sharp points, blades and other items, so as not to scratch the product.
7. Control the forklift seat, personal movement, and the work environment to avoid personal injury or damage to the tool.
• Do not operate any tool when tired or under the influence of drugs, alcohol or medications.
• Do not overreach when operating the tool. Proper balance enables better control in unexpected situations.

SAVE THESE INSTRUCTIONS

SPECIFICATIONS

Instructions

Diagram showing dimensions and adjustment points of the forklift seat. Key dimensions include:

• Height adjustment: 30-35mm
• Shock absorption stroke: 35mm
• Seat front and rear adjustment stroke: 75mm
• Seat backrest angle adjustment handle
• Armrest Angle adjustment handle
• Weight adjustment handle
• Adjusting handle for seat-back rake
• Adjusting handle for longitudinal position of seat
• Overall dimensions: 530±10mm (width), 590±10mm (depth), 755±10mm (height)

A bolt hole diagram is provided for comparison with the machine. The diagram shows a pattern of holes with dimensions: 260mm length, 22 holes of φ11mm diameter, with specific spacing indicated.

Connector type of seat safety switch: 40C

Seat parameter

1. Adjustable range of front and rear seats is 150mm.
2. The Angle of the backrest can be adjusted from 0° to 180°.
3. Seat height adjustable range is 60mm, divided into three levels.
4. Shock absorber travel is 80mm.
5. The weight regulator can be adjusted continuously according to the body weight between 50-130KG.
6. The connector type of seat safety switch: 40C.

Correct Disposal

This product is subject to the provision of European Directive 2012/19/EC. The symbol showing a wheelie bin crossed through indicates that the product requires separate refuse collection in the European Union. This applies to the product and all accessories marked with this symbol. Products marked as such may not be discarded with normal domestic waste, but must be taken to a collection point for recycling electrical and electronic devices.

Manufacturer and Importer Information

Manufacturer: Shanghaimuxinmuyeyouxiangongsi

Address: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, shanghai 200000 CN.

EC REP: E-CrossStu GmbH. Mainzer Landstr.69, 60329 Frankfurt am Main.

UK REP: YH CONSULTING LIMITED. C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

Imported to AUS: SIHAO PTY LTD. 1 ROKEVA STREET EASTWOOD NSW 2122 Australia

Imported to USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730