Introduction
This manual provides essential instructions for the proper setup, operation, maintenance, and care of your Troy Lee Designs FLOWLINE SE Helmet with MIPS technology. Please read this manual thoroughly before using your helmet to ensure maximum safety and performance. This helmet is designed for mountain bicycle use.
Safety Information
- Always wear a helmet when cycling.
- A helmet cannot protect against all possible impacts.
- Inspect your helmet for damage before each ride. Replace immediately if damaged or after any impact, even if visible damage is not apparent.
- Do not modify the helmet or use harsh chemicals for cleaning, as this may compromise its protective capabilities.
Helmet Components
Familiarize yourself with the key components of your FLOWLINE SE Helmet:
Image Description: A detailed diagram illustrating the various components of the Troy Lee Designs FLOWLINE SE Helmet. Labels point to the MIPS B-Series Rotational Brain Protection system, 16 ventilation vents, extended coverage MTB trail helmet shell, Dual Density EPS for impact absorption, anti-microbial quick-dry premium comfort liner, full 360-degree fit retention system with 3-way rear height adjustment, and the Premium 3D Fidlock magnetic buckle system. A 3-way adjustable screwless visor is also highlighted.
- MIPS B-Series Protection: Integrated system designed to reduce rotational forces that can result from certain impacts.
- Shell: Extended coverage MTB Trail Helmet shell for comprehensive protection.
- EPS Liner: Dual Density Expanded Polystyrene (EPS) for effective energy absorption during both low and high-speed impacts.
- Ventilation: 16 strategically placed vents for optimal airflow and cooling.
- Visor: 3-way adjustable screwless visor for personalized positioning.
- Comfort Liner: Anti-microbial, quick-dry premium liner for hygiene and comfort.
- Retention System: Full 360-degree fit retention system with 3-way rear height adjustment for a secure and customizable fit.
- Buckle System: Premium 3D Fidlock magnetic buckle for easy and secure fastening.
Setup and Fitting
1. Sizing and Initial Fit
Ensure you have selected the correct helmet size. Refer to the size chart below:
| Brand Size | Head Circumference (in) | Hat Size (in) |
|---|---|---|
| XS / S | 20.9 - 22.1 | 6.6 - 7 |
| M / L | 22.4 - 23.2 | 7.1 - 7.3 |
| XL / 2XL | 23.6 - 24.8 | 7.5 - 7.9 |
The helmet should fit snugly and comfortably, without excessive pressure points. It should not move freely when you shake your head.
2. Adjusting the Retention System
The FLOWLINE SE Helmet features a full 360-degree fit retention system with 3-way rear height adjustment. Use the dial at the back of the helmet to tighten or loosen the fit around your head. Adjust the rear height mechanism to position the retention system comfortably at the base of your skull.
3. Securing the Chin Strap
The helmet is equipped with a Premium 3D Fidlock magnetic buckle system.
- Bring the two parts of the buckle together; the magnets will assist in alignment and connection.
- Adjust the strap tension so that the helmet is held firmly in place, but without causing discomfort. You should be able to fit one or two fingers between the strap and your chin.
- Ensure the strap dividers are positioned just below your ears.
4. Visor Adjustment
The 3-way adjustable screwless visor can be moved up or down to your preferred position for optimal vision and sun protection. Simply push or pull the visor to adjust its angle.
Image Description: A close-up view of the detached visor component of the Troy Lee Designs FLOWLINE SE Helmet, showing its shape and attachment points.
Operation and Use
The Troy Lee Designs FLOWLINE SE Helmet is specifically designed for cycling, particularly mountain biking. Once properly fitted, the helmet provides protection and comfort during your rides.
MIPS Technology
The integrated MIPS (Multi-directional Impact Protection System) B-Series is designed to add protection in helmets. It is a low-friction layer inside the helmet, which allows a multi-directional movement of 10-15mm on certain angled impacts, intended to help reduce rotational force to the head. This system works in conjunction with the helmet's EPS liner to enhance overall impact protection.
Image Description: A side view of the Troy Lee Designs FLOWLINE SE Helmet in Smoke color, showcasing its overall design and MIPS integration.
Care and Maintenance
Cleaning the Helmet
- Use only mild soap and water to clean the helmet's exterior shell and straps.
- Avoid using harsh chemicals, solvents, or abrasive cleaners, as these can damage the helmet's materials and compromise its protective properties.
- Wipe the helmet with a soft, damp cloth and allow it to air dry completely.
Liner Care
The anti-microbial quick-dry premium liner can be removed for cleaning. Hand wash the liner with mild soap and cool water, then air dry. Ensure the liner is completely dry before reinserting it into the helmet.
Storage
Store your helmet in a cool, dry place away from direct sunlight and extreme temperatures. Do not store it near heat sources or in areas where it might be exposed to chemicals.
Troubleshooting
Helmet Feels Loose or Uncomfortable
- Re-adjust the retention system dial at the back of the helmet for a snug fit.
- Check the chin strap tension and ensure the strap dividers are correctly positioned.
- If the helmet still feels loose or causes pressure points, it may be the wrong size. Refer to the size chart in the "Setup and Fitting" section.
Damage and Replacement
- Visible Damage: If you notice any cracks, dents, or other visible damage to the shell, EPS liner, or straps, replace the helmet immediately.
- Impact: Even if there is no visible damage, a helmet that has sustained an impact should be replaced. The internal structure may be compromised, reducing its protective capabilities.
- Aging: Helmets have a limited lifespan. Consult Troy Lee Designs' recommendations for helmet replacement intervals, typically every 3-5 years, depending on use and care.
Specifications
| Feature | Detail |
|---|---|
| Brand | Troy Lee Designs |
| Model Name | 110526011 |
| Color | Smoke |
| Age Range | Adult |
| Size | X-Small/Small (other sizes available) |
| Special Feature | Adjustable retention system, MIPS B-Series Protection |
| Outer Material | Polycarbonate (PC) |
| Inner Material | Expanded Polypropylene (EPP) / Expanded Polystyrene (EPS) |
| Recommended Uses | Cycling (Mountain Biking) |
| Item Weight | 0.96 Kilograms |
| Style | Open Face |
| UPC | 887202496950 |
| Included Components | Troy Lee Designs - FLOWLINE SE HELMET; TROOPER SMO |
Warranty Information
This product is covered by a Manufacturer Warranty. For specific details regarding the terms, conditions, and duration of your warranty, please refer to the documentation included with your purchase or visit the official Troy Lee Designs website. Keep your proof of purchase for warranty claims.
Customer Support
If you have any questions, require assistance, or need to report an issue with your Troy Lee Designs FLOWLINE SE Helmet, please contact Troy Lee Designs customer support directly. You can find contact information on their official website or through the Troy Lee Designs Store on Amazon.
