COMHOMA Vanity Desk B1000-DELETE with Mirror and Lights

Introduction

Thank you for purchasing the COMHOMA Vanity Desk with Mirror and Lights. This manual provides detailed instructions for assembly, operation, maintenance, and troubleshooting to ensure safe and efficient use of your new vanity desk. Please read all instructions carefully before beginning assembly and retain this manual for future reference.

Safety Information

• Assembly may require tools and safety precautions. Always unplug and allow electrical components to cool before handling.
• Keep electrical components away from water and avoid overloading power outlets.
• Ensure all screws and fasteners are securely tightened before use.
• Do not stand on the vanity desk or place excessively heavy items on it.
• Keep small parts away from children during assembly to prevent choking hazards.

Product Dimensions

Refer to the image below for detailed product dimensions.

Image showing the overall dimensions of the vanity desk, including height, width, and depth, along with measurements for individual components like drawers and shelves.

• Product Dimensions: 35.43"D x 15.75"W x 54.72"H
• Item Weight: 48 Pounds

Parts List

Before assembly, ensure all parts are present and undamaged. Refer to the assembly video for visual identification of parts and hardware.

• Desk Board (1)
• Side Board (2)
• Back Panel (3)
• Dividers (4)
• Small Shelves (5, 6)
• Mirror (7)
• Side Brackets (8, 9, 10)
• Upper Bracket (11)
• Support Rods (12, 13, 14)
• Large and Small Fabric Drawers
• Hardware: Screws (A, B, C), Wood Pins (i), Connectors (E, F), Pads (L), Stickers (M)

Setup and Assembly

Follow these step-by-step instructions for assembling your COMHOMA Vanity Desk. An instructional video is provided below for visual guidance.

1. Assemble Metal Frame Base:
   • Attach the pads (L) to the bottom of side brackets (8, 9, 10).
   • Connect side bracket (8) and support rod (12) using screw (B).
   • Connect side brackets (9) and (10) with support rod (13) using screw (B). Repeat for the other side.
   • Combine side bracket (8) and upper bracket (11) with screw (B). Then attach upper bracket (11) to middle bracket (9) with screw (B).
   • Install the diagonal support rods (14) onto the brackets using screw (C).
2. Assemble Mirror and Shelf Unit:
   • Attach the mirror (7) to the back panel (3) using wood pins (i).
   • Install the side board (part 2) to the back panel (3) using connectors (E) and (F).
   • Install small shelves (5) and (6) onto the side board (part 2) using connectors (E) and (F). For a cleaner look, cover the screws with stickers (M).
   • Install the dividers (4) onto the side board (part 2) using connectors (E) and (F).
3. Attach Desk Board:
   • Attach the desk board (1) to the assembled dividers (4) using screws (A) and wood pins (i).
   • Install screws (A) on the back panel (3) and the mirror (7) to secure the top unit to the desk board.
4. Combine Top Unit with Metal Frame:
   • Carefully lift the assembled desk board (1) with the mirror and shelf unit, and align it with the metal frame brackets (8, 9, 10).
   • Combine the desk board (1) and the brackets (8, 9, 10) using screw (B).
5. Install Drawers:
   • Assemble the large and small fabric drawers by unfolding them and inserting the bottom panels.
   • Attach the handles to the drawers using the provided screws.
   • Insert all assembled drawers into their respective slots in the vanity desk frame.
6. Connect Mirror Lights:
   • Locate the mirror light wires and connect them securely. Ensure the connection is firm.

Operating Instructions

Mirror Lights

The vanity mirror is equipped with LED lights offering three color modes and adjustable brightness. The touch screen switch controls these functions.

Image illustrating the three distinct lighting modes available on the vanity mirror.

• Power On/Off: Lightly touch the power icon on the mirror to turn the lights on or off.
• Change Color Mode: With the lights on, tap the mode icon to cycle through the three color modes: warm yellow, warm white, and cool white.
• Adjust Brightness: With the lights on, press and hold the power icon to adjust the brightness. Release when the desired brightness level is reached.

Maintenance

Cleaning

• Wood Surfaces: Wipe with a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners that may damage the finish.
• Mirror: Use a glass cleaner and a lint-free cloth. Do not spray cleaner directly onto the mirror; apply it to the cloth first.
• Fabric Drawers: Spot clean with a mild detergent and damp cloth. Allow to air dry completely. Do not machine wash.

General Care

• Regularly check all screws and fasteners to ensure they remain tight.
• Avoid exposing the vanity desk to direct sunlight or extreme temperature changes to prevent warping or discoloration.
• Do not place hot items directly on the surface without protection.

Troubleshooting

Mirror Lights Not Working

• Check Power Connection: Ensure the power adapter is securely plugged into both the vanity desk and a working electrical outlet.
• Inspect Wiring: Verify that the mirror light wires are correctly connected as per assembly instructions.
• Test Outlet: Plug another device into the electrical outlet to confirm it is functioning.
• Contact Support: If the issue persists after checking these points, contact customer support for further assistance.

Drawers Not Sliding Smoothly

• Check Alignment: Ensure the fabric drawers are correctly inserted and aligned within their respective slots.
• Remove Obstructions: Check for any items or debris obstructing the drawer's path.
• Even Weight Distribution: Ensure items within the drawers are evenly distributed to prevent imbalance.

Specifications

Warranty and Support

For warranty information or if you encounter any issues not covered in this manual, please contact COMHOMA customer support. Keep your purchase receipt for warranty claims.

Customer Support: Refer to the product packaging or the official COMHOMA website for contact details.