Aeitto Cold Press Juicer Instruction Manual

1. Introduction

This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your Aeitto Cold Press Juicer. Designed for extracting juice from various fruits and vegetables, this masticating juicer operates at a low speed to preserve nutrients and minimize oxidation.

Figure 1.1: Aeitto Cold Press Juicer Overview

2. Safety Instructions

• Always unplug the juicer from the power outlet before assembling, disassembling, or cleaning.
• Do not immerse the motor base in water or other liquids.
• Keep hands and utensils out of the feed chute during operation to prevent injury. Use the food pusher provided.
• Ensure all parts are correctly assembled and locked before operating the juicer.
• Do not operate the juicer if the power cord or plug is damaged.
• This appliance is for household use only. Do not use outdoors.
• Keep out of reach of children.
• Avoid juicing hard seeds, pits, or frozen fruits, as this may damage the auger or motor.

3. Setup and Assembly

Follow these steps to assemble your Aeitto Cold Press Juicer before first use.

1. Place the motor base on a stable, flat surface.
2. Align the juicing bowl with the motor base and rotate until it locks into place.
3. Insert the filter screen into the juicing bowl, ensuring it is seated correctly.
4. Place the auger into the center of the filter screen, pressing down gently until it clicks into position.
5. Attach the feed chute assembly onto the juicing bowl, aligning the arrows and rotating clockwise until it locks securely.
6. Position the juice cup and pulp cup under their respective spouts.

Figure 3.1: Juicer Components for Assembly

Initial Cleaning

Before first use, wash all detachable parts (juicing bowl, filter, auger, feed chute, juice cup, pulp cup) with warm, soapy water. Rinse thoroughly and dry completely.

4. Operating Instructions

Preparing Ingredients

Wash all fruits and vegetables thoroughly. For optimal juicing and to prevent clogging, it is recommended to cut fibrous ingredients like celery into small chunks. The juicer features a 3.3-inch wide and dual feed chute, allowing for larger pieces of fruits and vegetables, and a smaller chute for strip-shaped ingredients, reducing preparation time.

Figure 4.1: Wide & Dual Feed Chute in Use

Juicing Process

1. Plug the juicer into a power outlet.
2. Press the "ON" button to start the juicer. The low 60 RPM speed minimizes heat build-up and oxidation, preserving nutrients.
3. Slowly feed prepared ingredients into the appropriate feed chute. Use the food pusher only when necessary.
4. The juicer will automatically separate the juice into the juice cup and the pulp into the pulp cup.
5. After juicing, press the "OFF" button to stop the appliance.

Figure 4.2: 7-Stage Upgraded Spiral Auger Process

The powerful masticating technology, featuring a concave feed chute, effectively grinds fruits and vegetables, reducing tangling and clogging, and increasing juice yield up to 96%. This design also prevents direct hand entry for safety.

Figure 4.3: Juice and Pulp Separation

The juicer also features a "Magic Plug" to lock in nutrients and prevent oxidation, allowing for mixing different juices without immediate dripping.

Figure 4.4: Magic Plug for Nutrient Preservation

5. Maintenance and Cleaning

Regular cleaning ensures the longevity and optimal performance of your juicer. The Aeitto masticating juicer features a simple and quick disassembly design for easy cleaning.

1. Unplug the juicer from the power outlet.
2. Disassemble all removable parts: feed chute assembly, auger, filter screen, juicing bowl, juice cup, and pulp cup.
3. Rinse all parts under running water to remove large pulp residues.
4. Use the included special brush to clean the filter screen thoroughly, as pulp can easily get trapped in its fine mesh.
5. Wash all parts with warm, soapy water.
6. Rinse thoroughly and allow all parts to air dry completely before reassembling or storing.
7. Wipe the motor base with a damp cloth. Do not submerge the motor base in water.

6. Troubleshooting

7. Specifications

• Brand: Aeitto
• Model Name: masticating juicer
• Color: Avocado green
• Product Dimensions: 19"D x 14.96"W x 10.33"H
• Item Weight: 13.82 pounds
• Voltage: 120 Volts
• Number of Speeds: 1
• Special Features: Wide & Dual Feed Chute, High Juice Yield, Self Feeding Cold Press juice extractor, Easy to Clean, 200W High Power & Low Noise Motor
• Blade Material: Acrylonitrile Butadiene Styrene

8. Warranty and Support

Aeitto provides a 30-day return policy and 24 months Repair and Replacement Service (After Activation) for the slow masticating juicer. For any inquiries or assistance, Aeitto offers 7x24 hours of Customer Service. Please reach out to us anytime for support.