Important Safety Instructions
When using electrical appliances, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following:
- Read all instructions before operating the blender.
- To protect against electrical shock, do not immerse the blender base, cord, or plug in water or other liquids.
- Close supervision is necessary when any appliance is used by or near children.
- Unplug from outlet when not in use, before assembling or disassembling parts, and before cleaning.
- Avoid contact with moving parts.
- Do not operate any appliance with a damaged cord or plug, or after the appliance malfunctions or has been dropped or damaged in any manner. Contact customer service for examination, repair, or adjustment.
- The use of attachments not recommended or sold by the manufacturer may cause fire, electric shock, or injury.
- Do not use outdoors.
- Do not let cord hang over edge of table or counter, or touch hot surfaces.
- Keep hands and utensils out of container while blending to prevent the possibility of severe injury to persons or damage to the blender. A scraper may be used but only when the blender is not running.
- Blades are sharp. Handle with care.
- Always operate blender with lid in place.
- Do not blend hot liquids in the blender.
- This appliance is equipped with overload and overheat protection for safe operation.
- Ensure the safety switch is engaged before operation.
Figure 1: Elite Kitchen Supply Commercial Blender HS-226.
Product Components
The Elite Kitchen Supply Commercial Blender HS-226 includes the following components:
- Blender Base with Motor
- 4000ml BPA-Free PC Jar
- Lid with Removable Cap
- 8-Piece Stainless Steel Blade System (integrated into jar)
Figure 2: Main components of the blender, including the base, jar, and lid.
Setup and Assembly
- Unpacking: Carefully remove all components from the packaging. Retain packaging for future storage or transport.
- Cleaning: Before first use, wash the 4000ml PC jar, lid, and removable cap with warm, soapy water. Rinse thoroughly and dry. The blender base should be wiped clean with a damp cloth. Note: The jar is not dishwasher safe.
- Placement: Place the blender base on a stable, flat, and dry surface. Ensure there is adequate ventilation around the unit.
- Assemble Jar: Place the 4000ml PC jar onto the blender base. Ensure it is securely seated. The jar features an integrated 8-piece stainless steel blade system.
- Secure Lid: Place the lid onto the jar and twist to lock it into position. Ensure the removable cap is also securely in place.
- Power Connection: Plug the power cord into a grounded electrical outlet (110-120V, 50/60Hz).
Figure 3: The 4000ml PC jar with its lid and removable cap.
Figure 4: The blender's power plug, designed for standard grounded outlets.
Operating Instructions
The blender features a control panel with an ON/OFF switch, a variable speed dial, and a PULSE switch.
Figure 5: The control panel of the blender, showing the ON/OFF switch, variable speed dial (MIN to MAX), and PULSE switch.
- Prepare Ingredients: Cut ingredients into appropriate sizes for blending. Do not overfill the 4000ml jar.
- Load Jar: Place ingredients into the jar. Ensure the lid is securely fastened.
- Power On: Flip the OFF/ON switch to the "ON" position.
- Select Speed: Turn the variable speed dial to your desired blending speed. Start with a lower speed and gradually increase as needed.
- Pulse Function: For short bursts of power or to chop ingredients, press and hold the PULSE switch. Release to stop. The pulse function operates at maximum speed.
- Blending: Allow the blender to process ingredients until the desired consistency is achieved. The 1400W high-speed motor and 8 stainless steel blades ensure efficient blending.
- Power Off: Once blending is complete, turn the speed dial to "MIN" and then flip the OFF/ON switch to the "OFF" position. Unplug the blender from the power outlet.
- Remove Contents: Carefully remove the lid and pour out the blended contents.
Figure 6: The robust 8-piece stainless steel blade system designed for efficient blending.
Maintenance and Cleaning
Proper maintenance ensures the longevity and optimal performance of your blender.
- Always unplug the blender before cleaning.
- Jar and Lid: Wash the 4000ml PC jar, lid, and removable cap with warm, soapy water immediately after use. Rinse thoroughly and dry. Do not place the jar in a dishwasher.
- Blender Base: Wipe the blender base with a damp cloth. Do not immerse the base in water or any other liquid.
- Blades: Exercise extreme caution when cleaning the blades as they are very sharp. Use a brush to clean around the blades if necessary.
- Storage: Store the blender in a clean, dry place with the jar assembled on the base or stored separately.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Blender does not turn on. | Not plugged in; ON/OFF switch is off; jar not properly seated; safety switch not engaged. | Ensure power cord is securely plugged in. Flip ON/OFF switch to "ON". Ensure jar is correctly placed on the base and locked. Check safety switch. |
| Motor stops during operation. | Overload or overheat protection activated. | Unplug the blender. Remove some ingredients from the jar. Allow the motor to cool down for 15-20 minutes before restarting. |
| Ingredients are not blending smoothly. | Too little liquid; too many ingredients; ingredients are too large. | Add more liquid. Reduce the amount of ingredients. Cut ingredients into smaller pieces. Use the pulse function for stubborn items. |
| Leakage from the bottom of the jar. | Jar not properly assembled or damaged. | Ensure the blade assembly is tightly secured to the jar. Check for cracks or damage to the jar. Contact customer service if damaged. |
Specifications
Figure 7: Detailed specifications and dimensions for the HS-226 blender, including product size, jar capacity, and weight.
| Feature | Detail |
|---|---|
| Model Number | HS-226 |
| Brand | Elite Kitchen Supply |
| Power Source | Corded Electric |
| Wattage | 1400 watts |
| Voltage | 110-120 Volts |
| Frequency | 50/60Hz |
| Capacity | 4 Liters (4000ml / 135 oz) |
| Jar Material | BPA-Free Polycarbonate (PC) |
| Blade Material | Stainless Steel 304 (8-piece system) |
| Controls Type | Push Button and Dial (Variable Speed, Pulse) |
| Special Features | Overheat Protection, Overload Protection, Pulse Function, Safety Switch, Speed Control |
| Product Dimensions (D x W x H) | 7.8"D x 7.8"W x 20.9"H |
| Item Weight | 11 Pounds (Net) |
| Housing Material | ABS |
| Dishwasher Safe (Jar) | No |
| Certifications | ETL, CE |
Figure 8: Product label showing model number, power, voltage, and frequency details.
Warranty and Support
This product comes with a manufacturer's warranty:
- 1-year all-parts warranty.
- 1-month labor warranty.
Warranty Exclusions: The warranty does not cover equipment used in food trucks, trailers, boats, residential addresses, islands, or built-in decorations.
For technical support, warranty claims, or replacement parts, please contact Elite Kitchen Supply customer service.
Product Video Overview
The following video provides a general overview of Elite Kitchen Supply's commercial kitchen equipment, which may include the blender.