HUANUO HNLCH01W-US Electric Chair Lift User Manual

Introduction

The HUANUO Electric Chair Lift is designed to assist individuals with limited mobility in transferring from the floor or into and out of a bathtub. This versatile device enhances safety and promotes independence for daily activities such as bathing and fall recovery. Please read this manual thoroughly before initial use to ensure safe and proper operation.

Important Safety Information

Adherence to these safety guidelines is crucial for preventing injury and ensuring the longevity of your device.

• Ensure proper assembly and use of suction cups on stable surfaces.
• Do not exceed the maximum weight capacity of 308 lbs (140 kg).
• Follow remote control instructions for safe operation.
• Store the chair in a secure location when not in use.
• Always ensure the device is fully charged before use, especially for bath transfers.
• Do not immerse the remote control in water.
• Regularly inspect the device for any signs of wear or damage. Discontinue use if damage is found and contact support.

Package Contents

• HUANUO Electric Chair Lift Unit
• Remote Control with integrated battery
• Power Adapter for charging
• User Manual (this document)

Setup

1. Unpacking and Initial Inspection

Carefully remove all components from the packaging. Inspect the unit for any visible damage. If any damage is found, do not use the product and contact customer support immediately.

2. Assembly

The HUANUO Electric Chair Lift features a buckle design for easy assembly. Simply align the backrest and seat components and press lightly until they snap into place. No tools are required.

Image: Close-up of the buckle mechanism for quick assembly.

3. Placement and Suction Cups

For stable operation, especially in a bathtub, ensure the six heavy-duty industrial-grade suction cups on the base are firmly anchored to a clean, dry, and stable surface such as tile, marble, or hardwood. Press down firmly on the unit to engage the suction cups.

Image: The base of the chair lift with six powerful suction cups, suitable for various hard surfaces.

4. Charging the Remote Control

The remote control contains a high-capacity lithium battery. Connect the included power adapter to the remote control and then plug it into a wall outlet. A full charge takes approximately 2.5 hours and provides over 50 lift cycles. LED indicators on the remote display real-time battery status.

Image: The remote control with its charging port and LED battery indicators.

Operating Instructions

1. General Operation

The remote control features simple one-touch buttons: Lift (green up arrow), Lower (green down arrow), and Emergency Stop (red button). To activate a function, long-press the corresponding button.

Image: The remote control with clearly marked buttons for operation.

2. Using as a Floor Lift (Fall Recovery)

1. Position the chair lift on a stable, flat surface near the individual.
2. Assist the individual to slide onto the seat of the lift. The widened seat with a contoured groove design provides enhanced comfort and stability.
3. Using the remote control, long-press the "Lift" button. The chair will slowly raise the individual.
4. As the chair rises, the backrest automatically adjusts from 140° to 93° to provide continuous ergonomic support and prevent sliding. The height adjusts from 2.3" to 18.9".
5. Once at a suitable height, assist the individual in transferring to a sofa, wheelchair, or standing position.

Image: The HUANUO Electric Chair Lift positioned next to a sofa, ready for use as a floor lift.

Image: Illustration of the automatic backrest adjustment from 140° to 93° as the chair lifts.

Video: Demonstrates the HUANUO electric lift chair in action, showing its lifting capabilities from the floor to a seated position.

3. Using as a Bath Lift

The chair lift is IP68 waterproof, making it safe for use in bathtubs and showers. Ensure the suction cups are securely attached to the bottom of the tub before use.

Image: The chair lift submerged in a bathtub, highlighting its IP68 waterproof feature.

1. Place the chair lift securely in the bathtub, ensuring all suction cups are engaged.
2. Assist the individual to sit on the chair lift while it is in its raised position.
3. Using the remote control, long-press the "Lower" button to gently lower the individual into the bathtub.
4. Once bathing is complete, long-press the "Lift" button to raise the individual out of the tub.
5. Assist the individual in safely exiting the bathtub.

Video: Shows the HUANUO chair lift assist devices for seniors being used to lower and raise an individual in a bathtub.

Maintenance

1. Cleaning

The removable cushion allows for easy cleaning. Wipe down the entire unit with a mild, non-abrasive cleaner and a soft cloth after each use, especially when used in the bathtub. Ensure all surfaces are dry before storage.

2. Storage

The electric chair lift folds down to just 6.4" in thickness, making it compact and space-saving. It can be conveniently stored under sofas, beds, or in corners. Built-in carry handles facilitate easy movement and transport between rooms or for travel.

Image: The chair lift folded into a compact size, demonstrating its space-saving storage capability.

Troubleshooting

• Unit not responding: Check the remote control battery level. Ensure the remote is properly connected to the main unit.
• Unstable operation: Verify that all suction cups are firmly attached to a clean, dry, and stable surface.
• Unusual noises: Discontinue use immediately and contact customer support.
• For any other issues, please refer to the contact information in the "Warranty and Support" section.

Specifications

Warranty and Support

The HUANUO Electric Chair Lift comes with a 1-year warranty. For any questions regarding assembly, product operation, or troubleshooting, please do not hesitate to contact our U.S.-based product support team. Our team is dedicated to providing prompt and helpful assistance.

Contact information can typically be found on the product packaging or the official HUANUO website.