Puig Avant Handguards Instruction Manual

1. Introduction

Thank you for choosing Puig Avant Handguards. These handguards are designed to provide enhanced protection for your hands and control levers on your motorcycle. Constructed from a durable black polypropylene central body and a smoked polycarbonate deflector, they offer lightweight resistance against scratches and minor impacts. This manual provides essential information for proper installation, operation, and maintenance to ensure optimal performance and longevity of your product.

Figure 1: Puig Avant Handguards, showing the black polypropylene body and smoked polycarbonate deflector.

2. Safety Information

Please read and understand all safety instructions before installing or using the Puig Avant Handguards. Failure to follow these instructions may result in injury or damage to your motorcycle.

• Professional Installation Recommended: If you are unsure about any step of the installation process, seek assistance from a qualified motorcycle mechanic.
• Check Compatibility: Ensure these handguards are compatible with your specific motorcycle model. Some models may require additional adaptors (not included).
• Secure Fasteners: Always ensure all bolts and fasteners are tightened to the manufacturer's specifications. Periodically check for tightness, especially after the first few rides.
• Clearance: Verify that the handguards do not interfere with the operation of your brake or clutch levers, throttle, or any other controls at full steering lock.
• Regular Inspection: Inspect the handguards regularly for any signs of damage, cracks, or loose components. Replace damaged parts immediately.

3. What's in the Box

Your Puig Avant Handguards package should contain the following items:

• Avant Handguards (Pair)
• Mounting Hardware (specific to the handguards)
• Note: Adaptors for specific motorcycle models may be sold separately.

4. Installation Instructions

The following steps provide a general guide for installing your Puig Avant Handguards. Specific installation procedures may vary depending on your motorcycle model and whether adaptors are required.

1. Prepare Your Motorcycle: Park your motorcycle on a stable, level surface. Ensure the engine is off and cool.
2. Identify Mounting Points: The handguards typically mount to the handlebars, often at the bar ends and near the control levers. Refer to any model-specific instructions or diagrams if provided.
3. Install Adaptors (if required): If your motorcycle requires specific adaptors, install them first according to their instructions. These usually involve replacing existing bar-end weights or mounting directly to the handlebar.
4. Attach Handguard Body: Position the handguard body onto the mounting points. The black polypropylene central body should align with the handlebar.
5. Secure Fasteners: Use the provided mounting hardware to secure the handguards. Start by hand-tightening all bolts to ensure proper alignment.
6. Adjust Position: Adjust the angle and position of the handguards to ensure they provide adequate protection without interfering with the operation of your brake and clutch levers, or any other handlebar-mounted controls. Ensure full steering lock can be achieved without obstruction.
7. Final Tightening: Once satisfied with the position, progressively tighten all fasteners using appropriate tools. Do not overtighten. Refer to your motorcycle's service manual or the handguard's specific instructions for torque specifications if available.
8. Final Check: Before riding, perform a thorough check. Ensure the handguards are securely mounted, do not wobble, and do not impede any controls or steering.

Figure 2: Puig Avant Handguard installed on a motorcycle, demonstrating proper fitment near the brake lever.

Figure 3: Another view of the Puig Avant Handguard installed, showing its integration with the motorcycle's controls.

5. Operation and Function

Once properly installed, the Puig Avant Handguards function passively to provide protection. Their primary purposes are:

• Hand Protection: Shielding your hands from wind, debris, and minor impacts during riding.
• Lever Protection: Protecting the brake and clutch levers from potential breakage in the event of a low-speed fall or tip-over.

No active operation is required from the rider once the handguards are installed correctly.

6. Maintenance

To ensure the longevity and continued effectiveness of your Puig Avant Handguards, follow these simple maintenance guidelines:

• Cleaning: Clean the handguards regularly with mild soap and water. Avoid abrasive cleaners or solvents that could damage the polycarbonate deflector or polypropylene body.
• Inspection: Periodically inspect the handguards for any signs of wear, cracks, or damage. Check all mounting bolts for tightness. Re-tighten if necessary.
• Damage: If the handguards sustain significant damage, especially to their structural integrity, they should be replaced to ensure continued protection.

7. Troubleshooting

This section addresses common issues you might encounter with your handguards.

8. Specifications

9. Warranty and Support

For warranty information or technical support regarding your Puig Avant Handguards, please refer to the official Puig website or contact your authorized Puig dealer. Keep your proof of purchase for any warranty claims.

Manufacturer: Motoplastic, S.A.

Website: www.puig.tv (Note: This is a placeholder URL, please verify the official website for Puig products.)