Oliry Smart AI Bark Collar User Manual

Introduction

The Oliry Smart AI Bark Collar (Model S1 Pro) is an advanced device designed to help train dogs to reduce excessive barking. Utilizing smart AI technology and voiceprint recognition, it accurately detects your dog's bark while filtering out other noises, preventing false triggers. This collar offers a humane and effective solution with multiple training modes and adjustable sensitivity levels, suitable for various dog sizes and temperaments.

Key features include:

• 5 Smart Training Modes: Beep, Vibration, Beep+Vibration, Beep+Vibration+Static, and Boost Static+Beep+Vibration.
• 5 Adjustable Sensitivity Levels: Customize the collar's response to your dog's barking.
• Advanced AI Chip: Ensures instant (0.01 seconds) and accurate bark detection, filtering out external sounds.
• Rechargeable Battery: Charges in 2 hours, lasts up to 18 days. Features a clear LCD display for battery level, sensitivity, and mode.
• Wide Compatibility: Fits dogs from 8 to 150 lbs with neck sizes from 8 to 25 inches, suitable for all breeds over 6 months old.
• IP67 Waterproof: Durable for outdoor training in various weather conditions.
• Pet-Safe Features: Includes a safety mode that pauses after 6 continuous triggers and removable metal prongs with silicone covers to protect your dog's skin.

Package Contents

Upon opening your Oliry Smart AI Bark Collar package, you should find the following components:

• Oliry Smart AI Bark Collar Unit
• Adjustable Nylon Strap
• USB Type-C Charging Cable
• User Manual
• Metal Prongs (short and long sets)
• Silicone Protective Covers for Prongs
• Test Board

Image: The Oliry Smart AI Bark Collar, showcasing its sleek design and how it appears on both a large Golden Retriever and a small Pomeranian.

Setup Instructions

1. Charging the Collar

Before first use, fully charge the bark collar. Connect the provided USB Type-C charging cable to the collar's charging port and plug the other end into a compatible USB power source (e.g., computer, wall adapter). The LCD display will indicate charging status. A full charge typically takes approximately 2 hours and provides up to 18 days of use.

Image: Close-up of the collar's USB-C charging port, highlighting its long-lasting power and easy charging capabilities.

2. Fitting the Collar

Proper fit is crucial for the collar's effectiveness and your dog's comfort. Attach the bark collar around your dog’s neck, ensuring it is snug but not too tight. You should be able to fit two fingers comfortably between the collar and your dog’s skin. The collar is adjustable to fit neck sizes from 8 to 25 inches, accommodating dogs from 8 to 150 lbs.

Image: Illustration showing the adjustable nature of the collar, suitable for dogs of all sizes and breeds over 6 months old.

For optimal safety, avoid wearing the collar for more than 12 hours per day. It is recommended for dogs over 6 months old.

3. Attaching Prongs and Covers

The collar comes with removable metal prongs and silicone covers. For most dogs, the silicone covers can be used to prevent irritation. If your dog has long or thick fur, you may need to use the longer metal prongs without covers to ensure proper contact with the skin. To attach or remove prongs, use the provided test board/wrench tool.

Image: Detailed view of the collar's contact points, highlighting the removable metal prongs and soft silicone protective sleeves for pet safety.

Operating Instructions

1. Powering On/Off

To power on the collar, press and hold the power button (usually marked with a power icon) for 2 seconds. The LCD display will light up. To power off, press and hold the power button again for 2 seconds.

2. Selecting Training Modes

The Oliry bark collar features 5 distinct training modes. Press the "M" (Mode) button to cycle through the available modes. The LCD display will show the active mode icon:

• Beep: Emits an audible tone.
• Vibration: Delivers a gentle vibration.
• Beep + Vibration: Combines audible tone and vibration.
• Beep + Vibration + Static: Progressive correction starting with beep, then vibration, then static stimulation if barking continues.
• Boost Static + Beep + Vibration: A more intense static stimulation followed by beep and vibration.

Image: Visual representation of the collar's five training modes and five sensitivity levels, tailored for effective bark control.

3. Adjusting Sensitivity Levels

The collar has 5 adjustable sensitivity levels (1-5). Level 5 is the most sensitive, detecting even soft barks, while Level 1 is the least sensitive, requiring louder barks to trigger. Adjust the sensitivity level to suit your dog's behavior and environment. This helps prevent false triggers from other noises.

Image: The collar's colorful digital display screen, illustrating user-friendly controls and status indicators for variable tone, vibration, static, boost static, sensitivity level, and battery status.

4. AI Bark Detection

The collar is equipped with an advanced AI chip and voiceprint recognition technology. This allows it to distinguish your dog's bark from other sounds, ensuring precise and safe bark control with a response time of just 0.01 seconds. This minimizes false triggers caused by other dogs barking or environmental noises.

Image: A visual representation of the collar's advanced AI chip and instant bark detection, showing how it filters out other noises for precise control.

Maintenance

1. Cleaning

To maintain the collar's performance and hygiene, clean it regularly. The manufacturer recommends dry cleaning only. Ensure the contact points are clean and free of debris to maintain effective operation.

2. Waterproofing

The Oliry Smart AI Bark Collar is IP67 waterproof, making it suitable for outdoor training in various weather conditions, including rain. However, ensure the charging port cover is securely sealed to maintain its waterproof integrity.

Image: A Golden Retriever playing in water, demonstrating the collar's IP67 waterproof design for worry-free use indoors or outdoors.

Troubleshooting

If you encounter any issues with your Oliry Smart AI Bark Collar, please refer to the following common problems and solutions:

• Collar not responding to barking:
  • Check if the collar is powered on and fully charged.
  • Ensure the prongs are making proper contact with your dog's skin. You may need to adjust the collar's tightness or use longer prongs for dogs with thick fur.
  • Increase the sensitivity level.
• False triggers (collar activates without barking):
  • Decrease the sensitivity level.
  • Ensure the collar is not too loose, as movement can sometimes trigger it.
  • Check for excessive external noises that might be mimicking a bark.
• Collar not charging:
  • Verify that the USB Type-C cable is securely connected to both the collar and the power source.
  • Try a different USB port or power adapter.
  • Ensure the charging port is clean and free of debris.
• Dog not responding to corrections:
  • Ensure the collar is fitted correctly and the prongs are making good contact.
  • Try a different training mode (e.g., switch from Beep to Beep + Vibration, or introduce Static if necessary).
  • Gradually increase the sensitivity level.
  • Consult with a professional dog trainer for personalized guidance.

Specifications

Warranty and Support

The Oliry Smart AI Bark Collar comes with a 2-Year Warranty from the manufacturer, Shenzhen Smartpet Technology Co.,Ltd. This warranty covers defects in materials and workmanship under normal use.

For any questions, technical support, or warranty claims, please refer to the contact information provided in your product's packaging or reach out to Oliry customer service.