Jardhom Drone with Screen on Controller User Manual

1. Introduction

This manual provides comprehensive instructions for the safe operation, setup, maintenance, and troubleshooting of your Jardhom S159 Drone with Screen on Controller. This advanced quadcopter drone is designed for aerial photography and videography, featuring stable flight performance, intuitive controls, and an integrated camera system. Please read this manual thoroughly before operating the drone to ensure proper use and to maximize your flying experience.

2. Package Contents

Verify that all items listed below are included in your package. If any items are missing or damaged, please contact customer support.

• Drone (x1)
• Remote Control with Screen (x1)
• Drone Battery (x3)
• Spare Propellers (x4)
• Screwdriver (x1)
• USB Charging Cable (x1)
• Color Box (x1)
• Storage Bag (x1)
• SD Card (x1)
• USB Drive (x1)

Figure 2.1: Included Package Contents

This image displays the complete set of items you should find in your drone package, including the drone itself, the remote control with an integrated screen, three drone batteries, four spare propellers, a small screwdriver, a USB charging cable, the product's color box, and a convenient storage bag. Also included are an SD card and a USB drive for data storage.

3. Setup

3.1 Charging the Batteries

Before first use, fully charge all drone batteries and the remote control. Use the provided USB charging cable. The drone batteries typically take approximately 60-90 minutes to fully charge, providing up to 20 minutes of flight time per battery (total 60 minutes with three batteries). The remote control has a rechargeable battery with an LCD display.

3.2 Installing Drone Batteries

Insert a fully charged battery into the designated battery compartment on the rear of the drone until it clicks securely into place.

3.3 Attaching Propellers

Carefully unfold the drone arms. Attach the propellers to the corresponding motor shafts. Ensure the correct propeller type (A or B) is matched with the correct motor as indicated on the drone's arms. Use the provided screwdriver to secure them if necessary.

3.4 Initial Calibration

For stable flight, it is crucial to calibrate the drone before each flight. Refer to the guide video (scan QR code on packaging or visit manufacturer's website) for detailed calibration steps. This typically involves gyroscope and geomagnetic calibration.

Figure 3.1: Drone Components Overview

This image provides an overview of the drone, its remote control, and essential accessories like batteries and propellers, illustrating how they fit together for setup.

4. Operating Instructions

4.1 Remote Control Overview

The remote control features an integrated LCD screen for real-time image transmission and flight data. Familiarize yourself with the buttons and joysticks before flight.

Figure 4.1: Remote Control Functions

This diagram illustrates the various buttons and functions of the remote control, including the power switch, camera up/down buttons, throttle, GPS switch, take off/land button, return/set button, function keys, screen switch, telescopic phone holder, return/headless mode button, speed switching, sense of direction, gyroscope calibration, geomagnetic calibration, choose up, charging port, memory socket, and confirm key.

4.2 Basic Flight Operations

• Power On: Turn on the drone first, then the remote control. Wait for the drone and remote to pair (indicator lights will stabilize).
• Take Off/Land: Press the dedicated Take Off/Land button for automatic ascent or descent. Alternatively, push both joysticks outwards and downwards to arm the motors, then push the left joystick up to take off manually.
• Altitude Hold: The drone features altitude hold for stable hovering.
• Speed Modes: Use the speed switching button to cycle through 3 different speed gears (low, medium, high) for varying flight experiences.
• Emergency Stop: In case of emergency, press the emergency stop button on the remote control to immediately cut power to the motors.

4.3 Advanced Features

• GPS Positioning: The drone utilizes GPS for precise positioning, enabling features like automatic return to home and stable outdoor flight.
• Optical Flow Mode: For stable indoor flight, the optical flow sensor assists in maintaining position without GPS.
• Obstacle Avoidance: Equipped with obstacle avoidance devices, the drone can detect and avoid obstacles, enhancing safety, especially in indoor environments.
• GPS Intelligent Return: The drone will automatically return to its take-off point in cases of low battery, loss of signal, or when manually activated via the return button.
• Camera Operation: Use the camera up/down buttons to adjust the camera angle. Press the dedicated photo/video buttons to capture 4K HD images and videos. Real-time image transmission is displayed on the remote control screen.
• EIS Anti-Shake: Electronic Image Stabilization helps to reduce blur and shake in your captured footage.
• Waypoint Flight: Plan custom flight paths using the mobile application (if connected).
• Intelligent Follow: The drone can follow a designated subject (requires mobile app connection).

Figure 4.2: GPS Positioning Return

This image highlights the drone's GPS positioning return feature, which provides an escort for flight and ensures easy implementation in unexpected situations such as being out of control, low battery, over range, or when a one-click return is initiated.

Figure 4.3: Key Performance Features

This graphic illustrates the drone's heavy-duty "flagship" performance, showcasing a big step forward with features like intelligent perception obstacle avoidance, HD electrically adjustable dual camera, optical flow positioning hover, surround shooting, brushless power, GPS intelligent return, remote control with screen, waypoint flight, real-time battery display, 5G HD image transmission, 25-minute battery life (per battery), and intelligent follow.

5. Maintenance

• Cleaning: Use a soft, dry cloth to clean the drone and remote control after each use. Avoid using liquids or solvents.
• Propeller Inspection: Regularly inspect propellers for cracks, bends, or damage. Replace damaged propellers immediately using the provided spare parts.
• Battery Care: Store batteries in a cool, dry place. Do not overcharge or over-discharge batteries. If storing for extended periods, charge batteries to approximately 50% capacity.
• Motor Maintenance: Keep motors free of dust and debris. Do not attempt to lubricate motors.
• Storage: When not in use, store the drone and its accessories in the provided storage bag to protect them from dust and physical damage.

6. Troubleshooting

If you encounter persistent issues or error messages not listed here, please refer to the manufacturer's official support channels or the guide video for further assistance.

7. Specifications

• Model: S159
• Brand: Jardhom
• Product Dimensions: 29.5 x 22 x 9 cm
• Item Weight: 1.2 kg
• Batteries: 3 A batteries required (included)
• Flight Time: Approximately 20 minutes per battery (60 minutes total with 3 batteries)
• Video Capture Resolution: 1080p, 720p (4K HD image/video recording storage)
• Special Features: GPS Positioning, Optical Flow Mode, Obstacle Avoidance, 3rd Gear Speed, EIS Anti-Shake, Real-time Image Transmission, Brushless Power, Intelligent Return, Waypoint Flight, Intelligent Follow.
• Country of Origin: China

8. Warranty and Support

Jardhom products are designed for reliability and performance. For warranty information, please refer to the documentation included with your purchase or visit the official Jardhom website. If you encounter any problems during flight or have issues with accessories, please contact our professional after-sales service team. Our store also sells vulnerable parts for drones that can be used in conjunction with the original drone.

For support, please visit: Jardhom Amazon Store (Note: This link is for general brand information and not direct support. Please refer to product packaging for specific support contact details.)