1. Introduction
Thank you for choosing the Vonztek Wireless Headset. This manual provides essential information for the proper setup, operation, and maintenance of your headset. Please read it thoroughly before use to ensure optimal performance and longevity of your device.
2. Package Contents
Verify that all items are present in your package:
- Vonztek Wireless Headset
- Type-C Charge Cable x1
- USB Dongle x1
3. Product Overview
The Vonztek Wireless Headset (Model XSY-BT882M-BJ-D-NEW2) is designed for business and work-from-home environments, offering clear communication and comfortable wear. It features AI Noise Canceling for the microphone and Passive Noise Cancellation for the earpieces.
Figure 3.1: Vonztek Wireless Headset with included accessories.
Key Features:
- Superior Stereo Sound: Equipped with 40mm dynamic drivers for clear audio reproduction.
- Comfortable Design: Ultra-soft memory foam ear cushions and an adjustable one-piece steel headband ensure comfort during extended use.
- Bidirectional Microphone with AI Noise Canceling: The flexible 270° rotatable microphone arm can be positioned on either side and features AI noise cancellation to focus on your voice, reducing background noise.
- Wide Compatibility: Connects to cellphones and desktops via Bluetooth 5.3 or the included USB dongle.
Figure 3.2: 40mm Superior Stereo Sound.
Figure 3.3: Light and Soft Design for Comfort.
Figure 3.4: Bidirectional Microphone with Noise Cancellation.
Figure 3.5: Wide Compatibility with Communication Platforms.
4. Setup
4.1 Charging the Headset
Before first use, fully charge the headset. Connect the provided Type-C charge cable to the headset's charging port and the other end to a USB power source (e.g., computer USB port, wall adapter). A full charge takes approximately 2 hours.
4.2 Connecting via USB Dongle
- Plug the USB dongle into an available USB port on your computer.
- Power on the headset by pressing and holding the power button.
- The headset will automatically connect to the dongle. An indicator light on the headset will confirm connection (refer to LED indicator section in operating instructions for details).
4.3 Connecting via Bluetooth
- Ensure the headset is powered off.
- Press and hold the power button until the LED indicator flashes rapidly (usually blue and red), indicating pairing mode.
- On your device (e.g., cellphone, computer), enable Bluetooth and search for new devices.
- Select "Vonztek Headset" from the list of available devices.
- Once connected, the LED indicator will show a steady blue light or flash slowly. The Bluetooth range is up to 15 meters.
5. Operating Instructions
5.1 Power On/Off
- Power On: Press and hold the power button for 3 seconds.
- Power Off: Press and hold the power button for 3 seconds.
5.2 Volume Control
- Volume Up: Press the '+' button.
- Volume Down: Press the '-' button.
5.3 Microphone Usage
- The microphone arm is flexible and can be rotated 270° to be worn on either the left or right side. Adjust it to position the microphone close to your mouth for optimal voice pickup.
- The AI Noise Canceling feature is automatically active to reduce background noise during calls.
5.4 Call Management
- Answer/End Call: Press the multi-function button (often indicated by a phone icon).
- Reject Call: Press and hold the multi-function button for 2 seconds.
5.5 Media Control
- Play/Pause: Press the multi-function button.
- Next Track: Press and hold the '+' button.
- Previous Track: Press and hold the '-' button.
6. Maintenance
- Cleaning: Use a soft, dry cloth to clean the headset. Do not use abrasive cleaners or solvents.
- Storage: Store the headset in a cool, dry place away from direct sunlight and extreme temperatures.
- Battery Care: To preserve battery life, charge the headset regularly, even if not in frequent use. Avoid fully discharging the battery for extended periods.
- Water Resistance: This headset is not water resistant. Avoid exposure to liquids.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Headset does not power on | Low battery | Charge the headset for at least 30 minutes. |
| Cannot connect via Bluetooth | Headset not in pairing mode; Device Bluetooth off; Out of range | Ensure headset is in pairing mode (flashing blue/red LED). Turn on Bluetooth on your device. Move closer to your device (within 15 meters). |
| No sound or poor sound quality | Volume too low; Incorrect audio output selected; Headset not properly connected | Increase volume on headset and device. Check audio settings on your device to ensure Vonztek Headset is selected as output. Reconnect the headset. |
| Microphone not working | Microphone muted; Incorrect input device selected | Ensure microphone is not muted. Check audio input settings on your device to ensure Vonztek Headset is selected as input. |
8. Specifications
| Feature | Detail |
|---|---|
| Model Name | XSY-BT882M-BJ-D-NEW2 |
| Connectivity Technology | Wireless (Bluetooth) |
| Wireless Communication Technology | Bluetooth 5.3 |
| Bluetooth Range | 15 Meters |
| Audio Driver Size | 40 Millimeters |
| Noise Control | AI Noise Cancellation (Mic), Passive Noise Cancellation (Earpiece) |
| Battery Life | 45 Hours |
| Charging Time | 2 Hours |
| Headphones Jack | Type-C (for charging) |
| Sensitivity | 118 dB |
| Impedance | 32 Ohms |
| Material | Faux Leather, Plastic, Stainless Steel |
| Item Weight | 13.1 ounces |
| Compatible Devices | Cellphones, Desktops |
9. Warranty and Support
For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official Vonztek website. Keep your proof of purchase for warranty claims.
