Introduction
Thank you for choosing the ELOMBR 12 Oz Commercial Popcorn Machine. This manual provides important information for the safe operation, maintenance, and troubleshooting of your new popcorn machine. Please read it thoroughly before use and retain it for future reference.
Front view of the ELOMBR 12 Oz Commercial Popcorn Machine.
Important Safety Instructions
- Read all instructions before operating the appliance.
- Do not touch hot surfaces. Use handles or knobs.
- To protect against electrical hazards, do not immerse cord, plugs, or the appliance in water or other liquid.
- Close supervision is necessary when any appliance is used by or near children.
- Unplug from outlet when not in use and before cleaning. Allow to cool before putting on or taking off parts, and before cleaning the appliance.
- Do not operate any appliance with a damaged cord or plug, or after the appliance malfunctions or has been damaged in any manner.
- The use of accessory attachments not recommended by the appliance manufacturer may cause injuries.
- Do not use outdoors.
- Do not let cord hang over edge of table or counter, or touch hot surfaces.
- Do not place on or near a hot gas or electric burner, or in a heated oven.
- Extreme caution must be used when moving an appliance containing hot oil or other hot liquids.
- Do not use appliance for other than intended use.
- Ensure the machine is placed on a stable, level surface.
- Always turn off the kettle heater within 10 seconds after hearing the first pop to prevent burning.
Setup
Before first use, ensure all packaging materials are removed. Place the popcorn machine on a stable, heat-resistant, and level surface. Ensure adequate ventilation around the unit.
Components Check:
- Popcorn Machine Unit
- Stainless Steel Kettle
- 1/2 cup measuring cup
- 1 tablespoon measuring spoon
- Popcorn scooper
Inspect all components for any damage. If any parts are missing or damaged, do not operate the machine and contact customer support.
Operating Instructions
This ELOMBR popcorn machine features a 3-switch control system for independent operation of the warming deck, stirrer, and kettle heater.
The 3-switch control panel for operating the popcorn machine.
Step-by-Step Popping:
- Preparation: Ensure the machine is plugged into a suitable power outlet (AC 120V 60Hz).
- Preheat Kettle: Turn on the "Pot Heater" switch and the "Stirrer" switch. Allow the kettle to preheat for 2-3 minutes.
- Add Ingredients: Using the provided measuring tools, add the recommended amount of oil (e.g., 1 tablespoon) to the preheated kettle. Then, add popcorn kernels (e.g., 1/2 cup for a 12 oz kettle).
- Popping Process: The stirrer will rotate to ensure even heating. Popcorn will begin to pop within a few minutes.
- Completion: Once you hear the first pop, turn off the "Pot Heater" switch within 10 seconds to prevent burning. Allow the remaining kernels to pop.
- Serve: Once popping has ceased, carefully tilt the kettle using the handle to release the popcorn into the warming deck below. Use the popcorn scooper to serve.
- Keep Warm: The "Warmer" switch controls the warming deck and internal light, keeping popcorn fresh and warm. Turn this on if you wish to keep the popcorn warm.
Video Guide:
Official video demonstrating how to operate the ELOMBR Tabletop Popcorn Machine, including adding ingredients and serving popcorn.
The ELOMBR popcorn machine can produce up to 48 cups of popcorn per batch.
Cleaning and Maintenance
Regular cleaning ensures optimal performance and longevity of your popcorn machine. Always unplug the machine and allow it to cool completely for at least 1 hour before cleaning.
Cleaning the Kettle:
- Remove Kettle: Carefully remove the kettle from its mounting brackets by lifting it from the top.
- Disassemble: Remove the stirring mechanism and lid from the kettle.
- Clean: Wipe the inside and outside of the kettle with a damp cloth or sponge. For stubborn residue, use a mild detergent and warm water. Rinse thoroughly and dry completely before reassembling.
Steps for detaching and cleaning the stainless steel kettle.
Cleaning the Main Unit:
- Crumb Tray: The machine includes a removable crumb tray at the bottom. Slide it out to dispose of unpopped kernels and debris. Clean the tray with warm, soapy water and dry thoroughly.
- Interior Surfaces: Wipe down the tempered glass panels and stainless steel interior surfaces with a damp cloth. Avoid abrasive cleaners that could scratch the surfaces.
- Exterior: Clean the exterior with a soft, damp cloth.
- Light Bulb: Ensure the light bulb is off and cool before cleaning or replacing.
User-friendly design includes an easy-to-clean kernel catcher and safety tempered glass.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Machine does not turn on. | Not plugged in; power switch off; circuit breaker tripped. | Ensure power cord is securely plugged in. Check if power switches are on. Reset circuit breaker if necessary. |
| Kettle not heating. | "Pot Heater" switch is off; kettle not properly connected. | Ensure "Pot Heater" switch is on. Check kettle connection. |
| Popcorn not popping or burning. | Insufficient preheating; incorrect oil/kernel ratio; kettle heater left on too long. | Preheat kettle for 2-3 minutes. Use recommended oil and kernel amounts. Turn off "Pot Heater" within 10 seconds of first pop. |
| Stirrer not rotating. | "Stirrer" switch is off; stirrer mechanism jammed. | Ensure "Stirrer" switch is on. Check for obstructions in the kettle and clear them. |
| Excessive unpopped kernels. | Insufficient heat; old kernels; incorrect oil amount. | Ensure proper preheating. Use fresh popcorn kernels. Adjust oil amount as per instructions. |
Product Specifications
| Feature | Detail |
|---|---|
| Brand | ELOMBR |
| Model Number | XH |
| Capacity | 12 ounces (produces up to 48 cups per batch) |
| Total Power | 850 W |
| Voltage | AC 120V 60Hz |
| Kettle Material | 304 Stainless Steel |
| Wall Material | Tempered Glass |
| Dimensions (L x W x H) | 14.69" x 12.91" x 23.03" |
| Special Features | Easy to clean, Easy to use, Low Noise, Retro Style |
| Included Components | 1 tablespoon measuring spoon, 1/2 cup measuring cup, popcorn scooper |
Product dimensions and key specifications.
Warranty and Customer Support
Your ELOMBR 12 Oz Commercial Popcorn Machine is backed by a 1-year warranty from the date of purchase. This warranty covers manufacturing defects and ensures reliable operation under normal use.
For any questions, concerns, or warranty claims, please contact our customer support team. We offer 24/7 around-the-clock customer support to assist you.
Contact Information:
- Email: Please refer to your product packaging or the official ELOMBR website for current contact information.
- Phone: Please refer to your product packaging or the official ELOMBR website for current contact information.
- Website: ELOMBR Official Store
Please have your purchase receipt and model number (XH) ready when contacting support.