Introduction
Thank you for choosing the EUGAD Space-Saving Bar Table. This manual provides detailed instructions for the assembly, operation, maintenance, and troubleshooting of your new bar table. Please read this manual thoroughly before assembly and use to ensure safe and correct operation. Keep this manual for future reference.
Important Safety Instructions
- Read all instructions carefully before assembly and use.
- Ensure all parts are present and undamaged before beginning assembly. Do not use if any parts are missing or damaged.
- Assemble the table on a soft, clean surface to prevent scratches.
- Tighten all screws and bolts securely, but do not overtighten. Re-check tightness periodically.
- Do not exceed the maximum weight capacity of 100 kg (220 lbs).
- Keep small parts away from children during assembly to prevent choking hazards.
- Use the table on a level surface to prevent tipping. The adjustable feet can help stabilize the table on uneven floors.
Package Contents
Please verify that all components listed below are included in your package:
- Tabletop (Light Oak finish)
- Metal Frame Components (White)
- Adjustable Feet
- Assembly Hardware (Screws, Allen Key, etc.)
- Instruction Manual
This image illustrates the main components and their respective dimensions, which are crucial for identifying parts during assembly. The tabletop measures 100cm in length and 40cm in width, with a thickness of 6.5cm. The overall height of the table is 100cm. The footrest is positioned 20cm from the floor.
Assembly Instructions
Follow these steps to assemble your EUGAD Bar Table. It is recommended to have a second person assist with assembly for easier handling.
- Unpack and Identify: Carefully unpack all components and hardware. Lay them out on a clean, soft surface. Refer to the "Package Contents" section and Figure 1 to identify each part.
- Assemble the Metal Frame: Connect the vertical metal legs to the horizontal support bars using the provided screws. Ensure the footrest bar is correctly positioned. Do not fully tighten screws at this stage.
- Attach the Tabletop: Place the tabletop upside down on a soft surface. Carefully align the assembled metal frame with the pre-drilled holes on the underside of the tabletop. Secure the tabletop to the frame using the appropriate screws.
- Tighten All Connections: Once all parts are loosely assembled, gradually tighten all screws and bolts. Ensure the table is stable and level.
- Install Adjustable Feet: Screw the adjustable feet into the bottom of each leg. These feet help protect your floor and allow for minor height adjustments to stabilize the table on uneven surfaces.
The adjustable feet, as shown in Figure 2, are designed to provide stability and prevent scratches on your flooring. They can be rotated to compensate for slight irregularities in the floor surface.
Operating Instructions
The EUGAD Bar Table is designed for versatile use in various settings:
- Bar Table: Ideal for dining or casual drinks in kitchens, dining areas, or home bars.
- Kitchen Island: Provides additional counter space for food preparation or serving.
- Entryway Table: A stylish and functional surface for keys, mail, or decorative items in an entryway.
- Temporary Workstation: Can serve as a compact standing desk or a temporary work surface.
Figure 3 shows the EUGAD bar table in a typical kitchen setup, paired with bar stools (not included with this specific model). Its compact design makes it suitable for smaller spaces, offering both functionality and a modern aesthetic.
Maintenance and Care
Proper care will extend the life and appearance of your EUGAD Bar Table:
- Cleaning: The tabletop is made from high-quality wood boards that are smooth and easy to clean. Wipe spills immediately with a soft, damp cloth. For stubborn stains, use a mild detergent and then wipe dry. Avoid abrasive cleaners or harsh chemicals.
- Frame Care: The metal frame can be cleaned with a damp cloth and mild soap. Dry thoroughly to prevent rust.
- Regular Checks: Periodically check all screws and bolts to ensure they remain tight. Retighten if necessary to maintain stability.
- Avoid Excessive Heat/Moisture: While the tabletop is water-repellent, avoid placing extremely hot items directly on the surface or exposing it to prolonged moisture.
As illustrated in Figure 4, the tabletop's surface is designed to be water-repellent, making it simple to clean up spills and maintain its appearance, even in a kitchen environment.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Table is wobbly/unstable. | Screws are loose; uneven floor; adjustable feet not properly set. | Check and tighten all assembly screws. Adjust the leveling feet until the table is stable. Ensure the table is on a flat surface. |
| Parts are missing or damaged. | Packaging error; shipping damage. | Do not proceed with assembly. Contact EUGAD customer support immediately with your purchase details. |
| Difficulty during assembly. | Incorrect part orientation; screws not aligning. | Review the assembly instructions and diagrams carefully. Ensure parts are oriented correctly before tightening. Loosen screws slightly to adjust alignment if needed. |
Product Specifications
| Feature | Detail |
|---|---|
| Brand | EUGAD |
| Model Number | B0DW46YDCX |
| Color | Light Oak + White |
| Material | Wood (Tabletop), Metal (Frame) |
| Overall Dimensions (L x W x H) | 100 cm x 40 cm x 100 cm (39.4 in x 15.7 in x 39.4 in) |
| Item Weight | 9.9 kg (21.8 lbs) |
| Weight Capacity | Up to 100 kg (220 lbs) |
| Assembly Required | Yes |
| Special Features | Space-saving design, high-quality water-repellent tabletop, sturdy metal frame, adjustable feet. |
Warranty and Support
EUGAD products are manufactured with quality and durability in mind. For information regarding warranty coverage, spare parts availability, or technical support, please contact your retailer or the EUGAD customer service department.
You can visit the official EUGAD store for more product information: EUGAD Store