KICKER DS Series 6.75-inch Coaxial Car Speakers

Introduction

This manual provides comprehensive instructions for the installation, operation, and maintenance of your KICKER DS Series 6.75-inch Coaxial Car Speakers (Model 43DSC6704). This kit is specifically designed for Kia Soul models from 2020 to 2024 and includes necessary speaker harnesses and mounting adapters for a seamless upgrade. Please read this manual thoroughly before beginning installation to ensure proper setup and optimal performance.

Package Contents

Verify that all items listed below are included in your package:

• Two (2) KICKER 43DSC6704 6.75-inch DS Series 2-Way Coaxial Car Speakers
• Two (2) Vixen Go VGH-72-7302 Speaker Harnesses
• Two (2) Vixen Go VGB6703 Speaker Mounting Adapters for Kia Soul 2020-2024

Specifications

Safety Information

• Always disconnect the vehicle's battery before performing any electrical work.
• Ensure all connections are secure to prevent short circuits and damage.
• Wear appropriate safety gear, including eye protection, during installation.
• If you are unsure about any step, consult a professional car audio installer.
• Keep all factory screws and fasteners; they may be needed for reassembly or future use.
• Verify speaker compatibility with your specific vehicle trim and audio system before permanent installation.

Setup & Installation

This KICKER speaker kit is designed for a plug-and-play installation in Kia Soul 2020-2024 models, minimizing the need for cutting or modification. The included speaker harnesses and mounting adapters simplify the process.

Important Disclaimer:

While efforts have been made to ensure compatibility, vehicle specifications can vary due to specific trims or premium audio systems. Always check your specific vehicle to confirm fitment. Consult a professional installer if you have concerns about interference with windows or other OEM parts.

Image: OEM Speaker Kit Disclaimer highlighting the importance of checking vehicle compatibility.

1. Installing Speakers into Mounting Adapters

The provided Vixen Go VGB6703 speaker mounting adapters are designed to adapt the 6.75-inch KICKER speakers to your vehicle's factory speaker openings. The speakers are installed from behind the adapter.

1. Align the KICKER speaker with the mounting adapter, ensuring the speaker is placed behind the adapter.
2. Line up the screw holes on the speaker with the corresponding holes on the adapter.
3. Secure the speaker to the adapter using the screws provided with your KICKER speakers. These screws are typically suitable for this connection. If needed, smaller or larger screws, or washers, can be used for a tighter fit.

Image: Close-up of a KICKER DS Series 6.75-inch coaxial speaker, showing the cone and tweeter.

Image: Pair of Vixen Go speaker mounting adapters, designed for specific vehicle fitment.

2. Connecting the Speaker Harness

The Vixen Go VGH-72-7302 speaker harnesses are designed to connect your new KICKER speakers directly to your vehicle's factory wiring without cutting or splicing.

1. Connect the spade connectors of the Vixen Go speaker harness to the terminals on the back of the KICKER speaker. Ensure a firm connection.
2. The other end of the harness will plug directly into your vehicle's factory speaker connector.

Image: Pair of Vixen Go speaker harnesses with spade connectors and vehicle-specific plugs.

3. Installing into Vehicle

1. Carefully remove the factory speakers from your Kia Soul's front or rear doors.
2. Mount the assembled KICKER speaker and adapter combination into the factory speaker opening.
3. Connect the Vixen Go speaker harness to the vehicle's factory speaker wiring.
4. Secure the speaker assembly using the appropriate fasteners.
5. Repeat the process for the other speaker.
6. Test the audio system before reassembling door panels.

Image: Complete KICKER speaker kit including two speakers, mounting adapters, and wiring harnesses.

Installation Video Guide:

Operation

Once properly installed, your KICKER DS Series speakers will operate as part of your vehicle's audio system. No specific user interaction is required beyond adjusting your car's head unit settings (volume, balance, fader, equalizer) to your preference. These speakers are designed to deliver a full-range sound experience with clear bass and high sensitivity.

• Volume Control: Adjust the volume through your car's head unit.
• Audio Settings: Utilize your head unit's equalizer and sound processing features to fine-tune the audio output to your listening environment.
• Break-in Period: Allow a short break-in period (typically 10-20 hours of normal use) for the speaker components to fully settle and achieve optimal sound quality.

Maintenance

KICKER DS Series speakers are designed for durability and require minimal maintenance. Follow these guidelines to ensure longevity:

• Cleaning: Gently wipe the speaker grilles and surrounds with a soft, damp cloth. Avoid using harsh chemicals or abrasive cleaners.
• Inspection: Periodically check speaker connections for tightness and ensure no wires are frayed or exposed.
• Environmental Factors: While designed for automotive use, avoid exposing speakers to excessive moisture or extreme temperatures beyond normal vehicle operating conditions.

Troubleshooting

If you experience issues with your KICKER speakers, refer to the following common troubleshooting steps:

• No Sound:
  • Check all wiring connections at the speaker and the vehicle's factory harness. Ensure they are secure and correctly polarized (positive to positive, negative to negative).
  • Verify that your car's head unit is powered on and set to an appropriate audio source.
  • Check the fader and balance settings on your head unit.
• Distorted Sound:
  • Reduce the volume level on your head unit. Distortion at high volumes may indicate the amplifier (if present) or head unit is overdriven.
  • Check for loose connections or damaged speaker wires.
  • Ensure the speakers are securely mounted and not vibrating against the door panel.
• One Speaker Not Working:
  • Swap the non-working speaker with a known working one (if possible) to determine if the issue is with the speaker or the wiring/head unit channel.
  • Inspect the specific wiring harness for that speaker for any damage or loose connections.

If these steps do not resolve the issue, contact KICKER customer support or a certified car audio technician.

Warranty and Support

For warranty information, technical support, or service inquiries, please refer to the official KICKER website or contact their customer service department. Keep your proof of purchase for any warranty claims.

KICKER Official Website: www.kicker.com