Important Safety Instructions
Please read and understand all safety instructions before installing or operating the TRIBURST Pro 360 LED Shop Light. Keep this manual for future reference.
- Indoor Use Only: This product is designed for indoor use in dry locations. Do not expose to water or moisture.
- Power Source: Ensure the power supply voltage is compatible with the light (120 Volts).
- Standard Socket: Designed for standard E26 medium screw-in sockets. Do not force into incompatible sockets.
- Installation: Always turn off power to the socket before installation or removal.
- Heat: While LED lights produce less heat than traditional bulbs, ensure adequate ventilation around the fixture.
- Eye Protection: Avoid direct eye exposure to the bright LED light.
- Disassembly: Do not attempt to disassemble or modify the light. This will void the warranty and may cause electrical hazards.
Product Overview
The Bell+Howell TRIBURST Pro 360 LED Shop Light is a high-performance lighting solution designed for various indoor spaces such as garages, workshops, basements, and attics. It features multi-directional adjustable panels for broad and customizable illumination.
Figure 1: TRIBURST Pro 360 LED Shop Light with its packaging, highlighting 5500 lumens and multi-directional panels.
Key Features:
- High Brightness: Delivers 5500 lumens of cool white light (6500 Kelvin) with 288 high-intensity LED bulbs.
- Multi-Directional Panels: Three adjustable LED panels can be angled to direct light precisely where needed, providing up to 3200 sq. ft. of coverage.
- Energy Efficient: Consumes 50 watts, offering up to 80% energy savings compared to traditional bulbs.
- Easy Installation: Screws into any standard E26 medium light socket without requiring tools or special wiring.
- Durable Design: Constructed with high-quality aluminum and raised LED panels for enhanced performance and longevity.
Figure 2: Visual representation of the TRIBURST Pro 360's key features: 5500 lumens, multi-directional design, energy saving, and easy installation.
Setup and Installation
The TRIBURST Pro 360 LED Shop Light is designed for quick and easy installation into existing standard light sockets.
Installation Steps:
- Turn Off Power: Before beginning installation, ensure the power to the light socket is completely turned off at the circuit breaker or wall switch.
- Remove Existing Bulb: Carefully unscrew and remove any existing light bulb from the E26 medium socket.
- Screw in TRIBURST Pro 360: Screw the TRIBURST Pro 360 LED Shop Light into the standard E26 medium socket until it is finger-tight. Do not overtighten.
- Adjust Panels: Once installed, adjust the three multi-directional LED panels to your desired angles to optimize light coverage.
- Restore Power: Turn the power back on at the circuit breaker or wall switch.
Figure 3: Illustration of the easy screw-in installation process into a standard light socket and the adjustable LED panels.
Operation
Operating the TRIBURST Pro 360 LED Shop Light is straightforward, utilizing your existing wall switch.
Basic Operation:
- Turning On/Off: Use the wall switch connected to the light socket to turn the light on or off.
- Adjusting Light Direction: The three LED panels can be manually adjusted to direct light. Gently pivot each panel to achieve the desired illumination angle.
The light provides a consistent 6500 Kelvin cool white light output when powered on.
Maintenance
The TRIBURST Pro 360 LED Shop Light requires minimal maintenance to ensure optimal performance and longevity.
- Cleaning: Ensure the light is turned off and cool before cleaning. Wipe the exterior surfaces with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Inspection: Periodically inspect the light for any signs of damage or loose connections. If any issues are found, discontinue use and consult a qualified electrician if necessary.
- LED Lifespan: The integrated LED bulbs are designed for long-term use and are not user-replaceable.
Troubleshooting
If you encounter issues with your TRIBURST Pro 360 LED Shop Light, refer to the following common troubleshooting steps:
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | No power to the socket, loose connection, faulty socket. |
|
| Light flickers. | Loose connection, unstable power supply. |
|
| Reduced brightness. | Dust accumulation on LED panels. |
|
If problems persist after trying these steps, contact customer support.
Specifications
| Feature | Detail |
|---|---|
| Model | 1245-Shoplight Pro |
| Brand | Bell+Howell |
| Light Output | 5500 Lumens |
| Wattage | 50 Watts |
| Light Source | 288 LED Bulbs |
| Color Temperature | 6500 Kelvin (Cool White) |
| Coverage Area | Up to 3200 sq. ft. |
| Bulb Base | E26 Medium |
| Voltage | 120 Volts |
| Material | Aluminum |
| Product Dimensions | 8"L x 6"W x 9"H |
| Item Weight | 1.65 pounds |
| Indoor/Outdoor Usage | Indoor Only |
Warranty and Support
For warranty information or technical support regarding your TRIBURST Pro 360 LED Shop Light, please refer to the manufacturer's official website or contact their customer service department. Keep your purchase receipt as proof of purchase.
Manufacturer: Emson
Brand: Bell+Howell
For further assistance, you may visit the Bell+Howell Store on Amazon.
