1. Introduction
This manual provides detailed instructions for the assembly, operation, and maintenance of your JUMMICO WD0489-88 5-Drawer Dresser. Please read all instructions carefully before beginning assembly and retain this manual for future reference.
Image 1.1: The JUMMICO WD0489-88 5-Drawer Dresser, showcasing its brown finish and five drawers.
2. Safety Information
Your safety is paramount. Please observe the following safety guidelines:
- Anti-Tip Device: This dresser is designed with an anti-tip device to enhance stability and prevent accidental tipping. It is crucial to install this device securely to a wall according to the assembly instructions. Failure to do so may result in serious injury.
- Weight Capacity: Do not exceed the specified weight limits for the drawers and top surface.
- Assembly: Ensure all parts are correctly assembled and fasteners are tightened before use.
- Placement: Place the dresser on a level, stable surface.
3. Package Contents
Before beginning assembly, verify that all components and hardware are present. Refer to the included parts list in your assembly guide. If any parts are missing or damaged, contact customer support immediately.
- Dresser panels (top, bottom, sides, back, drawer fronts, drawer sides, drawer backs)
- Drawer slides and runners
- Drawer knobs
- Assembly hardware (screws, dowels, cam locks, etc.)
- Anti-tip kit
- Assembly instructions manual
4. Setup and Assembly Instructions
Assembly of the JUMMICO WD0489-88 dresser is designed to be straightforward. Follow the step-by-step instructions provided in the separate assembly guide included with your product. Typically, assembly can be completed within 2 hours or less.
Key Assembly Steps:
- Unpack and Identify Parts: Lay out all components and hardware. Compare them against the parts list in the assembly guide.
- Assemble the Main Frame: Connect the side panels, bottom panel, and back panel to form the dresser's main structure.
- Install Drawer Runners: Attach the drawer runners to the inside of the dresser frame. Ensure they are level and aligned.
- Assemble Drawers: Construct each of the five drawers, attaching the drawer fronts, sides, and bottoms. Install the drawer knobs.
- Insert Drawers: Carefully slide the assembled drawers onto their respective runners.
- Attach Anti-Tip Device: Securely fasten the anti-tip device to the back of the dresser and to a wall stud using the provided hardware. This step is critical for safety.
For detailed diagrams and specific fastener usage, refer to your dedicated assembly manual.
5. Operating Instructions
The JUMMICO WD0489-88 dresser is designed for organized storage in various rooms.
Drawer Usage:
- Smooth Gliding: Each drawer is equipped with smooth-gliding runners for easy opening and closing. Avoid forcing drawers.
- Weight Limits: Each individual drawer has a maximum load-bearing capacity of 20 pounds. The top surface of the dresser can support up to 101 pounds. Distribute weight evenly to maintain stability and prevent damage.
- Storage Capacity: The five drawers provide ample space for clothing, accessories, and other personal items.
Image 5.1: Visual representation of the dresser's storage capacity, indicating approximate quantities for t-shirts, jeans, socks, and underwear.
Top Surface Use:
The flat top surface can be used to display decorative items such as lamps, books, or small electronics. Ensure items placed on top do not exceed the 101-pound weight limit and are stable to prevent falling.
6. Maintenance
Proper care will extend the life and appearance of your dresser.
- Cleaning: Wipe surfaces with a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners, which can damage the finish.
- Spills: Clean spills immediately to prevent staining or damage to the wood finish.
- Inspection: Periodically check all fasteners and connections to ensure they remain tight. Retighten if necessary.
- Sunlight: Avoid prolonged exposure to direct sunlight, which can cause fading or discoloration.
7. Troubleshooting
If you encounter issues with your dresser, consider the following:
- Drawers not closing smoothly: Check if the drawer runners are properly aligned and free of obstructions. Ensure the drawer is not overloaded.
- Wobbling: Verify that the dresser is on a level surface. Check all assembly fasteners for tightness. Ensure the anti-tip device is securely installed.
- Missing parts: If parts were missing upon delivery, refer to the package contents section and contact JUMMICO customer support with your model number and a description of the missing items.
8. Specifications
| Feature | Detail |
|---|---|
| Brand | JUMMICO |
| Model Name | Dresser for Bedroom |
| Model Number | WD0489-88 |
| Product Dimensions (D x W x H) | 14.2" x 45.1" x 20.9" |
| Color | Brown |
| Material | Wood |
| Finish Type | Painted |
| Number of Drawers | 5 |
| Item Weight | 82.7 pounds |
| Assembly Required | Yes |
| Drawer Load Capacity (each) | 20 pounds |
| Top Surface Load Capacity | 101 pounds |
Image 8.1: Detailed dimensions of the dresser and its individual drawers.
Image 8.2: Features such as the 1.18" thick tabletop, 6.3" drawer depth, and unique feet design.
9. Warranty and Support
For warranty information, customer support, or to order replacement parts, please contact JUMMICO directly through their official website or the retailer where the product was purchased. Please have your model number (WD0489-88) and purchase date available when contacting support.
