TMEZON MZ-2V30

TMEZON Wired Video Intercom System MZ-2V30 User Manual

Model: MZ-2V30

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your TMEZON Wired Video Intercom System MZ-2V30. This system offers enhanced security and convenience for villas, houses, offices, and apartments, featuring a 7-inch color LCD monitor, a high-definition outdoor doorbell camera with night vision, and remote unlock capabilities.

2. Package Contents

Please verify that all items listed below are included in your package:

  • 1 x Outdoor Doorbell Camera Unit
  • 2 x 7-inch Indoor Monitor Units
  • 2 x Power Adapters for Indoor Monitors
  • 1 x Rain Cover for Outdoor Unit
  • Connection Terminals
  • Mounting Screws and Wall Plugs
  • 4-pin Connectors for Extension Wires
  • User Manual (this document)

3. Components Overview

TMEZON Wired Video Intercom System with outdoor doorbell and two indoor monitors

This image displays the TMEZON Wired Video Intercom System. On the left is the silver outdoor doorbell unit, featuring a camera lens, call button, and speaker grille. On the right are two white indoor monitors, each showing a live video feed of a person outdoors, demonstrating the system's video capabilities.

3.1. Outdoor Doorbell Camera Unit

  • HD Camera: Provides clear video feed with a 115-degree wide viewing angle.
  • Night Vision: Equipped with IR (Infrared) LEDs for clear visibility in low-light conditions.
  • Call Button: Allows visitors to initiate a call to the indoor monitors.
  • Rainproof and Anti-Vandal Design: Durable construction for outdoor use.
  • Electronic Lock Compatibility: Can be connected to most electronic locks for remote access control.

3.2. Indoor Monitor Unit

  • 7-inch Color LCD Screen: Displays live video from the outdoor camera.
  • Touch Buttons: For easy navigation and control.
  • Hands-free Intercom: Facilitates two-way communication with visitors.
  • Adjustable Settings: Volume, brightness, and contrast can be customized.
  • Multiple Chimes: 16 selectable doorbell chimes.
  • Remote Unlock Function: Allows unlocking connected electronic locks from the monitor.
  • Auto Turn Off: System automatically powers down after a period of inactivity.

4. Setup and Installation

Careful installation is crucial for optimal performance. Please read all instructions before proceeding.

4.1. Pre-Installation Testing

Before permanent installation, it is recommended to test the system components. Connect the outdoor unit and indoor monitors using the original cables provided. Ensure the units are not too close to each other during testing to prevent audio feedback (noise).

4.2. Power Connection Warning

IMPORTANT: The power adapter must connect to the indoor monitor unit. Do not connect the power adapter directly to the outdoor doorbell unit, as this will cause damage.

4.3. Wiring Diagram (4-Wire System)

The TMEZON MZ-2V30 uses a 4-wire connection system. Refer to the included wiring diagram for specific connection points between the outdoor unit, indoor monitors, and any electronic locks.

  • Standard Connection: Use the provided 4-wire cable for direct connections.
  • Extension Wires: If longer distances are required (up to 100-200 meters), you can use RVV4 (4 core wire), Cat5, or Cat6 cables. Use the provided 4-pin connectors to facilitate these extensions.

4.4. Mounting

The system components are designed for surface mounting. Use the provided mounting screws and wall plugs to securely attach the outdoor unit (with its rain cover) and indoor monitors to your desired locations. Ensure the outdoor unit is positioned at an appropriate height for clear camera view and easy access to the call button.

5. Operating Instructions

5.1. Receiving a Call

  1. When a visitor presses the call button on the outdoor doorbell unit, the indoor monitor(s) will ring and display the live video feed from the camera.
  2. Press the Answer button (typically a phone icon) on the indoor monitor to initiate two-way communication.

5.2. Two-Way Intercom

Once a call is answered, you can speak to the visitor through the indoor monitor's microphone and speaker. The system supports hands-free communication.

5.3. Remote Unlock

If an electronic lock is connected to the system, you can unlock it remotely from the indoor monitor. During an active call or while monitoring the outdoor unit, press the Unlock button (typically a key icon) on the monitor to grant access.

5.4. Monitoring Outdoor Area

You can manually activate the outdoor camera feed on the indoor monitor at any time to view the area outside your door, even without a visitor pressing the doorbell. Consult your monitor's specific interface for the 'Monitor' or 'View' function.

5.5. Adjusting Settings

The indoor monitor allows you to customize various settings:

  • Volume: Adjust the ringtone and communication volume.
  • Brightness & Contrast: Optimize the display quality of the video feed.
  • Chime Selection: Choose from 16 different doorbell chimes.

Navigate through the monitor's menu using the touch buttons to access these options.

5.6. Auto Turn Off

The indoor monitor will automatically turn off after a period of inactivity to conserve power and reduce screen wear.

6. Maintenance

  • Cleaning: Use a soft, dry cloth to clean the surfaces of the indoor monitors and outdoor unit. For stubborn dirt, a slightly damp cloth can be used, followed by a dry cloth. Avoid abrasive cleaners or solvents.
  • Outdoor Unit: Periodically check the outdoor camera lens and IR sensors for any obstructions (e.g., dirt, spiderwebs) that might impair performance.
  • Wiring: Ensure all wiring connections remain secure.

7. Troubleshooting

If you encounter issues with your TMEZON Intercom System, please refer to the following common solutions:

ProblemPossible CauseSolution
Loud noise/feedback during testingIndoor and outdoor units are too close together.Separate the units by a greater distance during testing.
System not powering on / Damaged unitPower adapter connected incorrectly.Ensure the power adapter is connected only to the indoor monitor unit, not directly to the outdoor unit. Verify power outlet is functional.
No video or audio on monitorLoose or incorrect wiring connections.Check all 4-wire connections between the outdoor unit and indoor monitors. Ensure they are secure and correctly aligned.
Poor night vision performanceIR sensors or camera lens obstructed.Clean the camera lens and IR sensors on the outdoor unit. Ensure no objects are blocking the view.
Electronic lock not unlockingIncorrect wiring to the electronic lock or incompatible lock type.Verify the wiring between the outdoor unit and the electronic lock. Consult the lock's manual for compatibility and wiring requirements.

8. Specifications

  • Brand: TMEZON
  • Model: MZ-2V30
  • Connectivity Technology: Wired (4-wire system)
  • Indoor Monitor: 7-inch Color LCD
  • Outdoor Camera: HD, 115-degree wide view angle
  • Video Capture Resolution: 720p
  • Night Vision: IR (Infrared)
  • Power Source: Power adapter (for indoor monitors)
  • Compatible Devices: Electronic Locks, Wired Devices
  • Installation Type: Surface Mounting, Screw-In
  • Control Method: Remote, Touch
  • Alert Type: Motion (if supported by specific model features)
  • Max Extension Wire Distance: 100-200 meters (using RVV4/Cat5/Cat6)
  • Product Dimensions: Approximately 1 x 1 x 1 inches (Note: This dimension may be a generic placeholder. Refer to actual product for precise measurements.)
  • Item Weight: Approximately 2 pounds

9. Warranty Information

TMEZON products are manufactured to high-quality standards and are warranted against manufacturing defects for a period specified at the time of purchase. This warranty typically covers defects in materials and workmanship under normal use. It does not cover damage caused by improper installation, misuse, accidents, unauthorized repairs, or natural disasters. Please retain your proof of purchase for warranty claims. For specific warranty terms and conditions, refer to the documentation provided with your purchase or contact TMEZON customer support.

10. Customer Support

If you have any questions, require technical assistance, or need to report an issue with your TMEZON Wired Video Intercom System, please contact our customer support team. You can typically find contact information on the TMEZON official website or through your purchase platform. When contacting support, please have your product model number (MZ-2V30) and a detailed description of your issue ready.

© 2024 TMEZON. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.