SCHÜTTE 79516 Blackpool

SCHÜTTE 79516 Blackpool Kitchen Faucet Instruction Manual

Model: 79516 Blackpool

Brand: SCHÜTTE

Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your SCHÜTTE 79516 Blackpool kitchen faucet. Please read these instructions carefully before installation and use to ensure proper function and longevity of the product. Keep this manual for future reference.

SCHÜTTE 79516 Blackpool kitchen faucet installed in a modern kitchen

Image: The SCHÜTTE 79516 Blackpool kitchen faucet in a kitchen setting.

Safety Information

  • Always turn off the main water supply before beginning any installation, maintenance, or repair work.
  • Ensure all connections are secure and properly sealed to prevent leaks.
  • Do not use excessive force when tightening connections, as this may damage components.
  • If you are unsure about any step of the installation or repair process, consult a qualified plumber.
  • Keep small parts out of reach of children.

Included Components

Verify that all components are present before beginning installation:

  • 1 x SCHÜTTE 79516 Blackpool Kitchen Faucet Unit
  • 2 x Flexible Connection Hoses (500 mm, DVGW certified)
  • 1 x Pull-Out Spray Head with Hose (1500 mm)
  • 1 x Mounting Triangle
  • 1 x Set of Mounting Material (washers, nuts, screws)
  • 1 x Instruction Manual
All components of the SCHÜTTE 79516 Blackpool kitchen faucet laid out

Image: Overview of the faucet unit and all included installation components.

Setup and Installation

The SCHÜTTE 79516 Blackpool kitchen faucet is designed for easy installation on a single-hole deck mounting. Follow these steps for proper installation:

  1. Prepare the Mounting Hole: Ensure the mounting hole in your sink or countertop has a diameter between 35-50 mm.
  2. Connect Flexible Hoses: Screw the two flexible connection hoses (500 mm) into the base of the faucet unit. Hand-tighten first, then use a wrench for a secure fit, but do not overtighten.
  3. Insert Faucet: Place the faucet unit into the mounting hole. Ensure the base gasket is correctly positioned.
  4. Secure Faucet: From underneath the sink, slide the mounting triangle and then the nut onto the threaded rod of the faucet. Tighten the nut securely using the provided mounting material to fix the faucet firmly to the sink or countertop.
  5. Connect Pull-Out Spray Hose: Connect the 1500 mm pull-out spray hose to the designated connection point on the underside of the faucet. Ensure a tight seal.
  6. Attach Counterweight: Attach the counterweight to the pull-out spray hose at an appropriate height to ensure smooth retraction of the spray head.
  7. Connect to Water Supply: Connect the flexible hoses to your hot and cold water supply lines. The hoses are DVGW certified for quality and safety.
  8. Test for Leaks: Slowly turn on the main water supply and check all connections for leaks. If any leaks are detected, tighten the connections further.
Diagram showing the easy installation process of the kitchen faucet, highlighting the mounting mechanism and hole diameter requirement.

Image: Installation diagram illustrating the mounting process and required hole diameter (35-50 mm).

Operation

The SCHÜTTE 79516 Blackpool kitchen faucet is designed for intuitive and efficient use:

  • Water Flow and Temperature Control: The single-lever mixer controls both water flow and temperature. Lift the lever to increase flow. Move the lever to the left for hot water and to the right for cold water.
  • Cold-Start Function: When the lever is in the central position, only cold water flows. This energy-saving feature prevents the immediate activation of your water heater, reducing energy consumption.
  • Pull-Out Spray Head: Gently pull the spray head from the spout to extend it. The hose provides approximately 70 cm of reach, making it convenient for rinsing dishes, filling pots, or cleaning the sink. Push the spray head back into the spout until it clicks into place.
  • 360-Degree Swivel Spout: The faucet spout can be rotated 360 degrees, offering maximum flexibility and reach across your sink area.
Diagram illustrating the cold-start function of the faucet, showing cold water flow in the central lever position.

Image: Cold-Start function diagram, indicating energy saving.

The kitchen faucet with its pull-out spray head extended and water flowing.

Image: Faucet with pull-out spray head in use.

Sequence of images showing the faucet spout swiveling 360 degrees.

Image: 360-degree swivel spout functionality.

Close-up of the faucet with the pull-out spray head extended and water flowing into a sink.

Image: Detailed view of the pull-out spray head in operation.

Maintenance

  • Cleaning: To maintain the polished chrome finish, clean the faucet regularly with a soft cloth and mild soap. Avoid using abrasive cleaners, scouring pads, or chemical solvents, as these can damage the surface. Rinse thoroughly with clean water after cleaning and dry with a soft cloth.
  • Aerator Maintenance: Periodically unscrew the aerator at the tip of the spout and clean any mineral deposits or debris that may have accumulated. This helps maintain optimal water flow.
  • Cartridge Replacement: The ceramic sealing cartridge is designed for durability. If you experience persistent drips or issues with temperature control, the cartridge may need replacement. This procedure should ideally be performed by a qualified technician.

Troubleshooting

  • Low Water Flow:
    • Check if the main water supply valves are fully open.
    • Inspect the aerator for blockages from sediment or debris. Clean if necessary.
    • Ensure the flexible hoses are not kinked or obstructed.
  • Leaks from Faucet Base or Connections:
    • Turn off the water supply.
    • Check all connections for tightness. Gently tighten any loose fittings.
    • Inspect gaskets and O-rings for damage or improper seating. Replace if worn.
  • Difficulty with Temperature Control:
    • Verify that the hot and cold water supply lines are correctly connected to the faucet.
    • If using the cold-start function, ensure the lever is moved sufficiently to the left to engage hot water.
    • A faulty ceramic cartridge may cause temperature issues. Consider professional replacement.
  • Pull-Out Spray Head Does Not Retract Properly:
    • Check if the counterweight on the hose underneath the sink is properly positioned and not obstructed.
    • Ensure the hose is not kinked or tangled.

Specifications

Brand Schütte
Model Name BLACKPOOL
Model Number 79516
Recommended Uses Kitchen
Mounting Type Deck Mounted (Single Hole)
Finish Type Polished Chrome
Material Brass
Color Chrome
Number of Handles 1 (Lever Type)
Number of Holes Required 1
Special Features Pull-out spray head, 360° swivel spout, Cold-start function
Maximum Flow Rate 6.5 Liters per minute
Spout Reach (Pull-out) Approx. 70 Centimeters
Item Dimensions (D x W x H) 26.5 cm x 5.5 cm x 42.5 cm
Handle Material Ceramic
Diagram showing the dimensions of the SCHÜTTE 79516 Blackpool kitchen faucet.

Image: Dimensional drawing of the faucet.

Warranty and Support

For questions regarding your SCHÜTTE 79516 Blackpool kitchen faucet, technical assistance, or warranty claims, please contact SCHÜTTE customer support directly. You can reach them at:

Phone: +49 (0) 5407-81529-0

Please have your model number (79516) and purchase information ready when contacting support.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.