Kienzle Digital Radio Alarm Clock

Introduction

Thank you for choosing the Kienzle Digital Radio Alarm Clock. This device combines precision timekeeping with practical features for your daily routine. It automatically synchronizes its time via the DCF signal, ensuring accuracy. With dual alarm settings, a large, easy-to-read display, and an integrated thermometer, this alarm clock is designed for convenience and reliability. Please read this manual carefully to ensure proper use and to fully utilize all functions of your new alarm clock.

Package Contents

• Kienzle Digital Radio Alarm Clock
• User Manual

Note: 2x AAA/LR03 batteries are required and are not included in the package.

Product Overview

Figure 1: Front View. Displays time, alarm settings, and indoor temperature.

Figure 2: Back View. Shows the rear casing and the battery compartment cover.

Figure 3: Battery Compartment. Located at the back, requires 2x AAA/LR03 batteries.

Key Features:

• DCF radio-controlled time for automatic synchronization.
• Large, high-contrast LCD display with backlight.
• Two independent alarm times (Weekday/Weekend).
• Snooze function.
• Indoor temperature display (°C/°F).
• Date and weekday display.
• Intuitive touch-button operation.

Setup

1. Battery Installation

1. Locate the battery compartment on the back of the alarm clock (refer to Figure 3).
2. Remove the battery compartment cover by sliding it downwards.
3. Insert 2 new AAA/LR03 batteries, ensuring the correct polarity (+ and -) as indicated inside the compartment.
4. Replace the battery compartment cover.

Important: Use only new batteries of the specified type. Do not mix old and new batteries or different battery types.

2. Initial Setup and DCF Signal Synchronization

Upon battery insertion, the alarm clock will automatically attempt to receive the DCF radio signal. This process may take a few minutes. During synchronization, a radio tower icon will flash on the display. Once the signal is successfully received, the correct time, date, and weekday will be set automatically, and the radio tower icon will appear solid.

• Place the alarm clock near a window for better signal reception.
• Avoid placing it near electronic devices that may cause interference (e.g., TVs, computers, microwaves).
• If the signal is not received after several minutes, try repositioning the clock. The clock will continue to attempt synchronization periodically.

Operating Instructions

The alarm clock features four touch-sensitive buttons located below the main display for easy operation:

• ⏰ / ☀ (Mode/Light) Button: Used to switch between display modes and activate the backlight.
• ⏰ (Alarm) Button: Used to set and activate/deactivate alarms.
• + / 📶 (Plus/Radio Signal) Button: Used to increase values during setting and manually initiate DCF signal search.
• - (Minus) Button: Used to decrease values during setting.

1. Setting Time and Date Manually (if DCF signal is unavailable)

1. Press and hold the ⏰ / ☀ button for approximately 3 seconds to enter time setting mode. The hour digits will flash.
2. Use the + or - buttons to adjust the hour.
3. Press the ⏰ / ☀ button again to confirm the hour and move to minutes. Adjust minutes with + or -.
4. Continue pressing ⏰ / ☀ to cycle through setting year, month, day, and 12/24-hour format. Adjust each with + or -.
5. Press ⏰ / ☀ one last time to exit setting mode.

2. Setting Alarm Times (Alarm 1: Mon-Fri, Alarm 2: Sat-Sun)

1. Press the ⏰ (Alarm) button once to display Alarm 1 (Mon-Fri) time.
2. Press and hold the ⏰ (Alarm) button for approximately 3 seconds. The hour digits for Alarm 1 will flash.
3. Use the + or - buttons to adjust the hour.
4. Press the ⏰ (Alarm) button again to confirm the hour and move to minutes. Adjust minutes with + or -.
5. Press the ⏰ (Alarm) button again to confirm Alarm 1 setting.
6. To set Alarm 2 (Sat-Sun), press the ⏰ (Alarm) button twice to display Alarm 2 time, then repeat steps 2-5.
7. To activate/deactivate an alarm, press the ⏰ (Alarm) button repeatedly until the desired alarm icon (⏰1 or ⏰2) appears or disappears on the display.

3. Snooze Function

When the alarm sounds, press the large button on the top of the alarm clock to activate the snooze function. The alarm will temporarily stop and sound again after approximately 5 minutes. To turn off the alarm completely, press any other button on the front panel.

4. Backlight

Press the ⏰ / ☀ (Mode/Light) button once to activate the backlight for a few seconds. This is useful for reading the display in low light conditions.

Figure 4: Display with Backlight. Provides clear visibility in dark environments.

5. Temperature Display

The alarm clock continuously displays the indoor temperature in either Celsius (°C) or Fahrenheit (°F). To switch between these units, press and hold the - button for approximately 3 seconds.

6. Display Modes (Time, Date, Weekday)

The main display typically shows the time and temperature. You can cycle through other information such as date and weekday by briefly pressing the ⏰ / ☀ (Mode/Light) button.

Maintenance

Cleaning

Wipe the alarm clock with a soft, dry cloth. Do not use abrasive cleaners or solvents, as they may damage the surface. Avoid exposing the device to excessive moisture.

Battery Replacement

When the display becomes dim or the functions are erratic, it is time to replace the batteries. Follow the "Battery Installation" steps in the Setup section. Dispose of used batteries responsibly according to local regulations.

Troubleshooting

Specifications

• Brand: Kienzle
• Model Number: 14986
• Color: Silver/Black
• Product Dimensions: 7.1 x 3.81 x 26.5 cm (2.8 x 1.5 x 10.4 inches)
• Item Weight: 122 grams (4.3 ounces)
• Material: Plastic
• Display Type: Digital LCD
• Time Format: 12-hour / 24-hour selectable
• Alarm Functions: 2 independent alarms (Mon-Fri, Sat-Sun), Snooze function
• Temperature Display: Indoor temperature in Celsius (°C) or Fahrenheit (°F)
• Power Source: Battery operated (2x AAA/LR03, not included)
• Special Features: DCF radio-controlled time, Backlight, Date display, Weekday display

Warranty and Support

Kienzle products are manufactured with high quality standards. For information regarding warranty, returns, or technical support, please refer to the purchase documentation or contact your retailer. Keep your proof of purchase for any warranty claims.

For further assistance, you may visit the official Kienzle brand store on Amazon: Kienzle Store