Fotopro X-GO E 2 Carbon Fiber Tripod Instruction Manual

1. Introduction

This manual provides detailed instructions for the proper setup, operation, and maintenance of your Fotopro X-GO E 2 Carbon Fiber Tripod Bundle. This photography kit is designed for portability and stability, featuring a lightweight carbon fiber travel tripod and the RZ-3 Quick Release system.

Please read this manual thoroughly before using the product to ensure safe and effective operation.

Figure 1: Fotopro X-GO E 2 Tripod demonstrating compact and portable design.

2. Key Features

• Compact and Robust Design: The RZ-3 Quick Release measures 56 x 40 x 17 mm (2.2 x 1.6 x 0.67 in) and weighs 0.06 kg (0.13 lbs), supporting loads up to 8 kg (17.64 lbs).
• Lightweight Carbon Fiber Construction: The tripod weighs only 0.98 kg (2.16 lbs) with a maximum load capacity of 8 kg (17.6 lbs), offering excellent portability and stability for outdoor photography.
• 2-in-1 Tripod and Monopod Functionality: Easily converts into a monopod. With the ball head and removable legs, it reaches 108.5 cm (42.7 inches); with the ball head, removable legs, and center column, it extends to 157 cm (61 inches). The reversible center column allows for low-angle shots.
• Versatile Height and Angle Adjustments: 5-section legs with twist locks extend from 34 cm (13.38 inches) to 152 cm (59.8 inches). Legs can be adjusted to three different angles for various shooting positions.
• 360° Ball Head (FPH-42QP): Features a 25mm ball-head with 360° rotation and a panning base for smooth panoramic photography. Includes a quick release plate for instant camera mounting.

3. Product Components

The Fotopro X-GO E 2 Tripod Bundle includes the following main components:

• Carbon Fiber Tripod Legs (5-section)
• FPH-42QP Ball Head
• RZ-3 Quick Release Plate
• Reversible Center Column
• Removable Monopod Leg
• Non-slip Rubber Feet
• Removable Weight Hook
• Carrying Bag

Figure 2: Overview of Fotopro X-GO E 2 Tripod Components.

4. Setup and Assembly

4.1. Unfolding the Tripod and Adjusting Leg Angles

To unfold the tripod, release the leg angle adjustment locks located at the top of each leg. Extend the legs to your desired angle. The legs can be set to three different angles by pushing the lever down and pulling the leg out to the desired position. Once set, ensure the locks are engaged for stability.

Figure 3: Adjustable height and leg angle options.

The 5-section legs feature twist locks. To extend a leg section, twist the lock counter-clockwise to loosen, pull the section out, and then twist clockwise to tighten and secure it. Repeat for all sections and legs until the desired height is achieved.

4.2. Attaching the Camera with Quick Release Plate

The FPH-42QP ball head includes an RZ-3 Quick Release plate. Attach the quick release plate to the bottom of your camera by screwing the 1/4" screw into the camera's tripod socket. Ensure it is securely tightened.

To mount the camera onto the ball head, align the quick release plate with the clamp on the ball head and push it in until it clicks securely into place. To remove, press the release lever on the clamp.

Figure 4: Instant camera installation and removal.

The quick release plate supports Arca-Swiss compatible specifications, allowing for broad compatibility with various camera setups.

Figure 5: Arca-Swiss compatibility and additional base option.

The quick release system also allows for quick installation and removal of stabilizers without needing to re-level, enhancing shooting efficiency.

Figure 6: Quick installation and removal of stabilizers.

4.3. Monopod Conversion

One of the tripod legs is removable and can be converted into a monopod. To do this:

1. Unscrew the designated leg from the tripod body.
2. Remove the ball head from the center column by unscrewing it.
3. Attach the ball head to the top of the removed leg.
4. For extended height, the center column can also be attached to the monopod leg.

Figure 7: Monopod conversion steps and applications.

5. Operating Instructions

6. Maintenance

• Cleaning: Wipe down the tripod with a soft, damp cloth after each use, especially after exposure to sand, dirt, or saltwater. Do not use harsh chemicals.
• Lubrication: Periodically check leg locks and moving parts for smooth operation. If necessary, apply a small amount of silicone-based lubricant to the twist locks. Avoid oil-based lubricants.
• Storage: Store the tripod in its carrying bag in a dry, cool place away from direct sunlight and extreme temperatures.
• Inspection: Regularly inspect all screws, bolts, and connections to ensure they are tight. Do not overtighten.

7. Troubleshooting

• Tripod Instability: Ensure all leg sections are fully extended and twist locks are securely tightened. Verify that the leg angle adjustment locks are properly engaged. Ensure the quick release plate is firmly attached to both the camera and the ball head.
• Stiff Leg Locks: If leg locks become stiff, clean them thoroughly to remove any accumulated dirt or debris. A small amount of silicone lubricant may be applied if needed.
• Ball Head Movement Issues: If the ball head does not move smoothly or does not lock securely, check that the main locking knob is properly adjusted. Clean any visible debris from the ball head mechanism.
• Camera Not Level: Use the built-in bubble level on the ball head to adjust the tripod and camera until level. Ensure the quick release plate is mounted straight on the camera.

8. Specifications

9. Warranty and Support

Fotopro products are manufactured to high-quality standards. For warranty information, technical support, or service inquiries, please refer to the warranty card included with your product or visit the official Fotopro website. Keep your purchase receipt as proof of purchase for warranty claims.