1. Introduction
Thank you for choosing the AOOEPU WiFi Extender Signal Booster. This device is designed to expand your existing wireless network coverage, eliminate Wi-Fi dead zones, and provide a stable, high-speed internet connection throughout your home or office. This manual will guide you through the setup, operation, and maintenance of your new WiFi extender, ensuring optimal performance and connectivity.
2. Product Overview
2.1. Package Contents
- AOOEPU WiFi Extender Signal Booster (1 unit)
- User Manual (1 copy)
2.2. Key Features
- Wide Coverage: Expands WiFi coverage up to 12,880 sq. ft., eliminating dead zones.
- High Performance: Supports up to 105 devices with stable and fast speeds.
- Dual-Band Support: Operates on both 2.4GHz (up to 300Mbps) and 5GHz (867-1200Mbps) bands for versatile connectivity.
- Ethernet Port: Allows for wired connections to devices like gaming consoles or smart TVs.
- Easy Setup: One-tap WPS button setup for quick and convenient pairing with your router.
- Multiple Modes: Supports Repeater, AP, and Router modes to suit various networking needs.
2.3. Product Components
3. Setup Guide
The AOOEPU WiFi Extender is designed for easy installation. The simplest method is using the WPS (Wi-Fi Protected Setup) button.
3.1. WPS Setup (Recommended)
- Power On: Plug the WiFi extender into an electrical outlet near your existing wireless router. Wait for the power indicator light to turn on.
- Press Extender WPS: Press the WPS button on your AOOEPU WiFi Extender. The WPS indicator light on the extender will start blinking.
- Press Router WPS: Within two minutes, press the WPS button on your wireless router.
- Pairing: The extender and router will automatically pair. Once successfully connected, the signal indicator lights on the extender will become solid. This may take a few seconds.
- Relocate (Optional): After successful pairing, you can unplug the extender and move it to a location between your router and the Wi-Fi dead zone. Ensure the signal indicator lights remain solid to confirm a good connection.
3.2. Manual Setup (via Web Browser)
If your router does not have a WPS button or you prefer manual configuration, follow these steps:
- Connect: Plug the extender into an electrical outlet. On your computer or mobile device, connect to the extender's default Wi-Fi network (e.g., "AOOEPU_Ext"). No password is required initially.
- Access Web Interface: Open a web browser and enter the default IP address (usually 192.168.1.1 or 192.168.0.1) or the setup URL provided in the quick start guide (e.g., extender.local).
- Login: Enter the default username and password (usually "admin" for both).
- Select Mode: Choose your desired operating mode (Repeater, AP, or Router).
- Configure: Follow the on-screen instructions to select your existing Wi-Fi network (for Repeater mode) or set up a new network (for AP/Router mode). Enter necessary passwords.
- Save & Reboot: Save your settings and allow the extender to reboot. The indicator lights will confirm a successful connection.
4. Operating Modes
The AOOEPU WiFi Extender supports three primary operating modes:
4.1. Repeater Mode
In Repeater Mode, the extender wirelessly connects to your existing router and amplifies its signal, extending coverage to areas with weak or no Wi-Fi. This is the most common mode for eliminating dead zones.
4.2. AP (Access Point) Mode
In AP Mode, the extender connects to your router via an Ethernet cable and transforms your wired network connection into a wireless access point. This is ideal for adding Wi-Fi capability to a wired-only network.
4.3. Router Mode
In Router Mode, the extender acts as a primary router, connecting directly to your modem via an Ethernet cable to create a new wireless network. This mode is suitable if you do not have an existing router.
5. Maintenance
To ensure the longevity and optimal performance of your AOOEPU WiFi Extender, follow these simple maintenance guidelines:
- Cleaning: Gently wipe the device with a soft, dry cloth. Do not use liquid cleaners or aerosols.
- Ventilation: Ensure the extender's ventilation holes are not blocked to prevent overheating.
- Environment: Avoid placing the extender in direct sunlight, near heat sources, or in excessively humid environments.
- Firmware Updates: Periodically check the manufacturer's website for firmware updates to ensure the best performance and security.
- Restart: If you experience minor connectivity issues, try restarting the extender by unplugging it for 10 seconds and then plugging it back in.
6. Troubleshooting
If you encounter issues with your WiFi extender, please refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| No power/Lights off | Not plugged in correctly; Power outlet issue | Ensure the extender is securely plugged into a working electrical outlet. Try a different outlet. |
| Cannot connect to extender's Wi-Fi | Extender not powered on; Incorrect network selected | Check power. Ensure you are selecting the correct extender network (e.g., AOOEPU_Ext) during initial setup. |
| Weak signal from extender | Too far from router; Obstructions | Relocate the extender closer to your main router, ensuring it's still within a good signal range. Minimize physical obstructions. |
| Internet drops frequently | Interference; Overloaded network | Try changing the Wi-Fi channel on your main router. Reduce the number of connected devices if possible. Ensure the extender is not too far from the router. |
| WPS pairing fails | Timing issue; Router WPS disabled | Ensure you press both WPS buttons within the 2-minute window. Check your router's settings to ensure WPS is enabled. Try manual setup via web browser. |
| Slow internet speed | Bandwidth congestion; Poor extender placement | Ensure the extender is placed optimally. Consider using the 5GHz band for higher speeds if your devices support it. Check your main internet connection speed. |
6.1. Resetting the Extender
If issues persist, you may need to perform a factory reset. Locate the reset button (often a small pinhole) on the extender. With the extender powered on, use a paperclip or similar pointed object to press and hold the reset button for about 5-10 seconds until the lights flash. The extender will then revert to its factory default settings, and you will need to set it up again.
7. Specifications
| Feature | Detail |
|---|---|
| Brand | AOOEPU |
| Model Number | AOOEPU-0630-6 |
| Product Dimensions | 7.48 x 3.74 x 2.4 inches |
| Item Weight | 5.6 ounces |
| Wireless Communication Standard | 2.4 GHz Radio Frequency, 5 GHz Radio Frequency |
| Data Transfer Rate | Up to 1200 Megabytes Per Second (300Mbps for 2.4GHz, 867-1200Mbps for 5GHz) |
| Special Features | 360 Degree Coverage, WiFi Mesh, Directional Antenna, 1-Tap Setup, Firewall |
| Connector Type | RJ45 (Ethernet Port) |
| Manufacturer | Shenzhen Century Xinyang Tech Co..Ltd |
| Country of Origin | China |
8. Warranty and Support
8.1. Warranty Information
AOOEPU products are covered by a standard manufacturer's warranty. Please refer to the warranty card included in your package or visit the official AOOEPU website for detailed warranty terms and conditions. Keep your purchase receipt as proof of purchase for warranty claims.
8.2. Customer Support
If you have any questions, require technical assistance, or experience issues not covered in this manual, please contact AOOEPU customer support. Contact information can typically be found on the product packaging, the official AOOEPU website, or through your retailer's support channels.
For the most up-to-date support resources, please visit the AOOEPU Store on Amazon.
