imokin MOPB0605
User Manual: imokin Qi2 Certified Portable Power Bank
Model: MOPB0605
1. Introduction
Thank you for choosing the imokin Qi2 Certified Portable Power Bank. This ultra-slim 5000mAh magnetic battery pack is designed to provide efficient and convenient charging for your compatible devices, including iPhone 16/15/14/13/12 series and other USB-C enabled devices. Featuring 15W wireless charging and 20W PD fast charging via USB-C, it offers a versatile power solution for on-the-go use. Please read this manual carefully to ensure proper operation and maintenance of your device.
2. Safety Information
To ensure safe operation and prevent damage, please observe the following precautions:
- Do not expose the power bank to extreme temperatures (above 45°C/113°F) or direct sunlight.
- Avoid dropping, impacting, or disassembling the device.
- Keep away from water, moisture, and corrosive materials.
- Do not use if the power bank is damaged, swollen, or leaking.
- Use only certified charging cables and adapters.
- Keep out of reach of children.
- Dispose of the product responsibly according to local regulations.
3. Product Overview
The imokin Portable Power Bank is designed for convenience and efficiency. Below are its key features and components.
3.1 Key Features
- Qi2 Certified 15W Wireless Charging: Provides fast and efficient wireless power for MagSafe-compatible iPhones (12-16 series) and other Qi2 devices.
- 20W USB-C PD Fast Charging: Supports both input and output for rapid charging of the power bank and connected devices.
- Ultra-Slim Design: At just 0.4 inches thick, it's designed to be compact and portable without obstructing your phone's camera.
- Strong Magnetic Connection: Ensures secure attachment to MagSafe-compatible devices with 13N (2.86LB) magnetic force.
- Comprehensive Safety Protections: Built-in safeguards against overcharging, over-discharging, short circuits, high temperatures, and more.
3.2 Package Contents
- imokin 5000mAh Wireless Power Bank x 1
- USB-C Data Cable x 1
- User Guide x 1
Figure 3.1: imokin Portable Power Bank in use with an iPhone.
Figure 3.2: Overview of key features including Qi2 certification and charging capabilities.
4. Setup
4.1 Initial Charging of the Power Bank
Before first use, fully charge your imokin Portable Power Bank. This ensures optimal performance and battery longevity.
- Connect the provided USB-C cable to the power bank's USB-C port.
- Connect the other end of the USB-C cable to a 20W or higher power adapter (not included).
- Plug the power adapter into a wall outlet. The LED indicators on the power bank will illuminate to show charging progress. All four LEDs will be solid when fully charged.
A full charge typically takes approximately 3 hours with a 20W charger.
Figure 4.1: Recharging the power bank via USB-C.
4.2 Compatibility
This power bank is compatible with a wide range of devices:
- Wireless Charging: iPhone 16/15/14/13/12 series (MagSafe compatible). For optimal magnetic attachment, use iPhones without a case or with a MagSafe-compatible case.
- Wired Charging (USB-C PD): iPhone, Samsung, Google, and other Android devices, as well as AirPods Pro 2 and other USB-C powered accessories.
Figure 4.2: Device compatibility overview.
5. Operating Instructions
5.1 Wireless Charging (MagSafe)
- Ensure your power bank is sufficiently charged.
- Align the power bank with the back of your MagSafe-compatible iPhone. The magnets will snap it into place.
- Wireless charging will begin automatically. The LED indicators on the power bank will show its remaining charge.
Figure 5.1: Wireless charging in progress.
Figure 5.2: Demonstrating the strong magnetic connection.
5.2 Wired Charging (USB-C)
- Connect one end of the USB-C cable to the power bank's USB-C port.
- Connect the other end of the USB-C cable to your device's charging port.
- Charging will begin automatically.
Figure 5.3: Wired charging in progress.
5.3 Charging Multiple Devices
The power bank supports charging two devices simultaneously: one wirelessly and one via the USB-C port.
Figure 5.4: Charging two devices concurrently.
5.4 Checking Battery Level
The LED indicators on the side of the power bank show the remaining battery charge:
- 4 LEDs: 75-100%
- 3 LEDs: 50-75%
- 2 LEDs: 25-50%
- 1 LED: 0-25% (recharge soon)
6. Maintenance
- Cleaning: Use a soft, dry cloth to clean the surface of the power bank. Do not use harsh chemicals or abrasive cleaners.
- Storage: Store the power bank in a cool, dry place away from direct sunlight and extreme temperatures. If storing for extended periods, charge the power bank to about 50% every 3 months to preserve battery health.
- Handling: Avoid dropping or subjecting the power bank to strong impacts.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Power bank not charging device. | Low power bank battery; incorrect cable/adapter; device not properly aligned (wireless); device not compatible. | Recharge power bank; ensure cable/adapter are functional and correct (20W PD for fast charge); re-align device for wireless charging; verify device compatibility. |
| Power bank not recharging. | Faulty charging cable/adapter; power outlet issue. | Try a different USB-C cable and a 20W (or higher) power adapter; try a different wall outlet. |
| Power bank or device gets hot during charging. | Normal operation (some heat is expected); poor ventilation; charging in high ambient temperature. | Ensure adequate ventilation around the power bank and device; avoid charging in direct sunlight or hot environments. If overheating is excessive or persistent, discontinue use and contact customer support. |
| Magnetic connection is weak. | Non-MagSafe case or no case; foreign objects between power bank and phone. | Remove non-MagSafe case or use a MagSafe-compatible case; ensure no debris is present on the magnetic surfaces. |
8. Specifications
| Feature | Detail |
|---|---|
| Model Number | MOPB0605 |
| Battery Capacity | 5000 mAh |
| Wireless Output | 15W (Qi2 Certified) |
| USB-C Input/Output | 20W Power Delivery (PD) |
| Product Dimensions | 4 x 0.4 x 2.5 inches |
| Item Weight | 5.1 ounces |
| Color | Slate Grey |
| Safety Features | Overcharge Protection, Over-discharge Protection, Overcurrent Protection, Short Circuit Protection, High Temperature Protection, Resistant Enclosure Protection |
9. Warranty and Customer Support
imokin provides a 24-month warranty for this product from the date of purchase. This warranty covers manufacturing defects and issues arising from normal use.
For technical support, warranty claims, or any questions regarding your imokin Portable Power Bank, please contact our friendly customer service team. Refer to the contact information provided on the product packaging or our official website.
Please have your purchase receipt and product model number (MOPB0605) ready when contacting support.
10. Product Video
Video 10.1: An overview of the imokin Portable Charger for MagSafe Qi2 Power Bank, highlighting its ultra-slim design, magnetic attachment, and charging capabilities.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.